Yanmar 2TNV70-HGE User manual

Features
__________________________________________________________________
Clean Emissions
Building off the proven TNE design, Yanmar has
achieved superior exhaust emissions by improving the
combustion chamber and fuel injection equipment
design. Engines are compliant with 2008 EPA Tier 4.
Reliable and Durable
The TNV engines now proudly take up the running as
Yanmar’s premium small industrial diesel. They offer
even more enhanced durability due to better block
cooling, a stiffer crank and pistons, finer tolerance in the
journal, and more. CAE analysis has brought lower
vibrations and higher strength to the mounting structure
for even better reliability in heavy-duty jobs.
Fuel Delivery and Economy
A newly designed, in-line ML fuel injection pump is
utilized to assure more precise fuel delivery and control.
The result is reduced emissions, improved performance
over a wide range of applications and good fuel
economy which assures that Yanmar’s reputation for
superior starting characteristics continues.
Noise Level Reduction
Yanmar’s original CAE techniques have optimized the
stiffness, minimized transformation, and reduced radiant
noise in the cylinder block. Gear noise reduction is
achieved through an improved gear tooth profile
resulting in less mechanical noise.
Additional Information
Yanmar America Corp Distributed By:
101 International Pkwy
Adairsville, GA 30103
www.yanmar.com
TNV IDI Series
Industrial Diesel Engine
___________________________________________________________________________________________________________
___________________________________________________________________________________________________________
Page 1 of 2
2TNV70-HGE General Specification
13.4 hp (10.0 kW) @ 3600 rated rpm*
______________________________________________________________________________________________
Type • • 2 Cylinder, 4-Cycle, Liquid Cooled Diesel Engine
Bore • • • • • • • • • • • • • • • • • • • • • • 70 mm
Stroke • • • • • • • • • • • • • • • • • • • • • 74 mm
Displacement • • • • • • • • • • • • • • • • • .570 L
Aspiration • • • • • • • • • • • • • Naturally Aspirated
Combustion System • • • • • • • • • Indirect Injection
Rotation (from flywheel end) • • • • • Counterclockwise
Dry Weight • • • • • • • • • • • • • 187 lbs (84kg)
Standard Engine Equipment
__________________________________________________________________
General
Intake & Exhaust Manifold
Muffler/Exhaust Pipe Gasket (shipped loose)
Lubrication System
2.2 L Capacity Deep Oil Pan
Trochoid Oil Pump
Paper Element Oil Filter
Oil Pressure Switch
Crankcase Breather, Closed Type
Electrical System
12V, 40 Amp Alternator
12V Starter Motor
12V Super Quick Glow Plugs
Preheat Timer (shipped loose)
Stop Solenoid Timer (shipped loose)
Fuel System
In-line ML Fuel Injection Pump
Mechanical Fuel Feed Pump
Paper Element Fuel Filter
Water Separator (shipped Loose)
Stop Solenoid, Integral to Fuel Injection Pump
Cooling System
Water Pump, Belt Driven
5-Blade, 260mm Cooling Fan—Pusher Type
21º C (160º F) Thermostat
Temperature Switch
Fan Belt
Power Take Off
Flywheel, SAE 7 1/2”
Flywheel Housing, SAE #6 (80 mm deep)
Image shown may not be actual engine

2TNV70-HGE
Industrial Diesel Engine
Length 16.4 in (418 mm)
Width 16.1 in (410 mm)
Height 19.8 in (503 mm)
*Rated power listed is NET engine output. The engine
operating environment and driven machine conditions
must be studied carefully when selecting an engine in
order to ensure correct engine selection, maximize
engine performance, extend engine service life and
improve machine capacity.
Consult the TNV Application Manual for additional en-
gine ratings and engine application information.
Materials and specifications herein are intended to serve as a guide in engine selection and subject to change without notice.
The International System of Units (SI) is used in this publication. Yanmar and its logos, as well as corporate identity used
herein, are trademarks of Yanmar and may not be used without permission.
Printed in USA © 3.8.09 Yanmar
AllRightsReserved
Note: Dimensions depend on final specifications.
Ratings Definitions and Conditions
Application standards for Yanmar industrial engines: Inlet
air standard conditions with a total barometric pressure of
100kPa (29.5 in. Hg), with 30% relative humidity, and 25°
C (77°F).
_____________________________________________________________________________________________________
Performance Data
_______________________________________________ Dimensions _________________________________________
_____________________________________________________________________________________________________
Rated Speed (rpm) Net rated kW Net rated hp
3600 10.0 13.4
kW to Hp conversion used is expressed as: hp = (kW value) x 1.34
Please Contact Yanmar for Details