YitaHome A-CR04 User manual

FTHKEA-0001
YTXC V1
ASSEMBLY INSTRUCTIONS
A-CR04
Notice：
1.Follow the installation instructions. Please confirm all accessories are preset before installation.
2.Do not fully tighten the screws during initial assembly.Fully tighten screws only once all pieces
which are correctly assembled.
3.If you encounter any problems during installation, please contact our customer service.
1
A-CR0
FTHKEA-0002
6
A-CR08
FTHKEA-0003
FTHKEA-0005
A-CR10
FTHKEA-0004
FTHKEA-0006

• Towel Warmers are designed to warm towels and bathrobes only and
should not be used for any other purpose
SAFETY INFORMATION
.
• Never stand, sit on or hang on the Towel Warmer unit.
• Never allow children to play on or with the Towel Warmer.
• Make sure that the electrical circuit breaker is shut off at the main panel
before wiring or servicing your Towel Warmer.
• The Towel Warmer must be properly grounded.
• Never place your Towel Warmer inside a shower, sauna or steam room
• All wiring must be in accordance with the National Electrical Code and
should be performed by a licensed professional who is certified to do
electrical wiring.
.
CLEANING INFORMATION
• Clean the Towel Warmer with a soft, non-abrasive, damp cloth while
warm. Once the Towel Warmer has cooled, lightly polish with a soft dry
cloth. Do not use abrasive cleaning powders, metal polish or chlorine-based
cleaners on any part of the Towel Warmer.
INSTALLATION
This appliance must be installed in accordance with the instructions in the
manual and the NEC guidelines relating to electrical fixtures in bathrooms.
The Towel Warmer must be on a GFCI protected circuit and be wired by
a professional who is certified to do electrical wiring.
2
Thank you for purchasing our Towel Warmer.

5
3
7
2
1
8910
13
4
2PCS 2PCS
6
11 12
Scissors
lower leg for plug in wire lower legs upper legs
hanger
1PCS
3
PART LIST

Caution:
4
Email: [e-mail]
YITAHOME

ll mounted plug-in installationall mounted plug-in installation
5
Ｗ

1
nted plug-i
Ｗn installation
2
lower leg for plug in wire
2
lall mol mouunted plug-in installation
6
NOTE: Option to install the plug either on the left side or the right side.

3
21PC 67
lower leg for plug in wire lower legs
l mounted plug-in installationa
Wlll mounted plug-in installation
7

5
42PCS
upper legs
ll mounted plug-in installationall mounted plug-in installation
8
W

9
ll mounted plug-in installationall mounted plug-in installation
W

10
ll mounted plug-in installationall mounted plug-in installation
W

12
11
ll mounted plug-in installationall mounted plug-in installation
W

910 11
12
ll mounted plug-in installationall mounted plug-in installation
W

13
ll mounted plug-in installationall mounted plug-in installation
W

78
14
ll mounted plug-in installationall mounted plug-in installation
W

120V 60Hz
hanger
1PCS
13
15
Installation Completed
Temperature Setting
Timer
On/Off
ll mounted plug-in installationall mounted plug-in installation
W

1
Wall mounted hardwired installation
16

17
Wall mounted hardwired installation

32PCS 67
lower legs
18
Wall mounted hardwired installation

5
42PCS
upper legs
19
Wall mounted hardwired installation

20
Wall mounted hardwired installation