YOSE POWER L200 User manual

Manual
L200

Contents
Product Description and Specifications 1
1
2
2
2
3
3
4
4
5
6
7
10
Parts Description
Functions Introduction
Features
Buttons Functions
Operation
Power on/off
Riding interface
Assist level switch
Turn on/off the light
Error Code
User Menu
Attentions
5
Clear trip data

Product Description and Specifications
Parts Description
1
Display Dimensions
71.85
50.13
47.73
28.56
60.14
22.2
50.10
16.00

Functions introduction
Features
L200 supports the common riding parameters and statistical results, as well as
In addition, the Bluetooth version also supports the following functions:
some useful functions:
Real-time speed, Max speed, Average speed
Real-time motor power
Battery indicator
Assistant level
Odometer, trip
Trip time
Calorie burnt
Light indicator
Metric(km/h)/Imperial(mph) switching
Error codes indicator
Brightness adjustment
Auto Power-off
2
Buttons Functions
APP connection
Data synchronization
Riding ranking
Riding track recording

3
Long press the [Power] button to power on, the boot interface will be shown for
about 2s, followed by the riding interface:
In any interface, long press the [Power] button, the shutdown interface will be
shown for about 2s before power off:
Power on/off
Buttons Name Functions
[Power] 1.Power on/off
2.Setting confirmation
1.Parameter adjustment
2.Light turn on/off
3.Menu operation
1.Parameter adjustment
2.Pedestrian mode on/off
3.Menu operation
[+]
[-]
Operation

4
Riding interface
Assist level switch
The speed ring is displayed according to the current speed and the speed limit
value, and when the speed reaches the speed limit, the full ring is displayed.
Light indicator
Bluetooth
connection indicator
Speed ring Speed Unit
Cruise
Data area
Muti-function
display area
Power
Calories Burnt
Riding time
Max speed
ODO
Trip
Data area
Avg speed
Pedestrian mode
Assist
Click [+] or [-] to switch assist levels;
Press and hold the [-] button to enter the pedestrian mode, and release to exit.
Battery indicator

[Note] The trip time, max speed, average speed, and calories burnt will be also
cleared by this operation.
5
Long press [+] button to turn on/off the light.
Long press [Power] & [+] button to clear trip data.
Turn on/off the light
Clear trip data

6
Common error codes are as follows (Only for reference, depending on other
electrical parts of the ebike):
Error Code
21
02 Brake Error
Low-voltage protection
Motor Phase Error
Throttle Error
06
07
08
22
23
24
25
26
30
Meaning
Error Code Meaning
Current or Mos Error
Throttle Error
Motor Phase Error
Motor Hall Error
Brake Error
Low-voltage protection
Communication Error
KM5S protocol Error Code
Li2 protocol Error Code
Error Code

7
To enter the user menu, please long press the [+] & [-] combination buttons for 1s
on the riding interface when static.
This interface will automatically return to the riding interface when there is no
operation for more than 60s.
In this interface, a prompt of "SIZE" appears at the bottom right, and the wheel
size value in the data area flashes. Click the [+] / [-] button to adjust wheel size
(inch), click the [Power] button to confirm and go to the next menu interface.
1. Wheel Size
In this interface, a prompt of "UNIT" appears at the bottom right, click the [+] / [-]
button to switch the speed unit, click the [Power] button to confirm and go to the
next menu interface.
2. Speed Unit
14
09
Motor Hall Error
Communication Error30
Current or Mos Error
User Menu

8
In this interface, a prompt of "SPEED" appears at the bottom right, click the [+] / [-]
button to adjust the speed limit value, click the [Power] button to confirm and go to
the next menu interface.
In this interface, a prompt of "OFF" appears at the bottom right, click the [+] / [-]
button to adjust the value of auto power off, the adjustment range is 0-99
(unit: min), 0=Never auto power-off, click the [Power] button to confirm and go to
the next menu interface.
3. Speed Limit
4. Auto Power Off

9
In this interface, a prompt of "RESET" appears at the bottom right, and the data
area flashes to display ‘y‘ or ‘n’:
Click the [+] / [-] button to switch ‘y’ or ‘n’, click the [Power] button to confirm and
go to the next menu interface.
In this interface, a prompt of "BLE" appears at the bottom right, the numerical
display area flashes "n", which means that the Bluetooth is not connected.
You can search and connect on the APP side. After the operation is successful,
the interface displays "y" and stops flashing. Click the [Power] button to confirm
and go to the next menu interface.
5. Reset
6. Bluetooth Connection (Bluetooth version only)
In this interface, the display area flashes to display the current backlight
brightness, you can click the [+] / [-] button to adjust, the adjustment range is 1-5,
click the [Power] button to confirm and go to the next menu interface.
7. Backlight Brightness

10
1.Be sure to power off first before connecting and disconnecting the cable, or the
display will be totally damaged;
2.When fix the display to the ebike, please ensure that the torque of the
screwdriver is about 0.5N.M (DO NOT EXCEED 0.6N.M), or it will cause damages
to the handle;
3.Do not put the display into water;
4.The display can be wiped with wet and soft cloth, but DO NOT use any chemical
liquid or spray on the display;
5.Please abide by local laws and regulations when scrapping, discard or recycle
in an environmentally friendly way, and do not discard the instrument or any
accessories as resident waste;
6.The damage and failure of the instrument caused by improper installation or
use are not covered by the after-sale warranty.
7. For more information and support, please contact [email protected].
Attentions