Yoshimura 070BG133001 User manual

RESEARCH&DEVELOPMENT OF AMERICA, INC.
www.yoshimura-rd.com
5420 DANIELS STREET STE A, CHINO CA., 91710 · [phone] · [phone] · FAX [phone]
THIS PRODUCT IS NOT DOT APPROVED.
Yoshimura R&D of America, Inc. is not liable or responsible for any resulting event caused by the
installation of this product. Check with local laws and regulations for compliance prior to
installation and use. This product is not intended for use on public highways.
! !
FENDER ELIMINATOR KIT
070BG133001
Yamaha WR250X/R

No.
Item
Description
Qty.
1
13300-FEBKT-A
Fender Eliminator Light Bracket
1
2
13300-FEBKT-B
License Plate Bracket
1
3
HB025024-C
Fender Eliminator Light
1
4
070BG-LPF
License Plate Frame
1
5
13300-TSB-L
Left Turn Signal Bracket
1
6
13300-TSB-R
Right Turn Signal Bracket
1
7
M6X18BHS
6mm x 18mm Button Head Screw
2
8
M6X16BHS
6mm x 16mm Button Head Screw
2
9
6MMWASHER
6mm Washer
4
10
6MMLN
6mm Nylon Lock Nut
4
**
17029
Yoshimura Sticker Sheet
1
Optional Parts
072BGLTSFK
Yoshimura LED Front Turn Signal Kit
072BGLTSR
Yoshimura LED Rear Turn Signal Kit w/ Relay
070BGUNVTBKT
Universal Turn Signal Bracket Kit
2
Assembly Diagram
** Not shown on diagram.
*** The Yoshimura Universal Turn Signal Bracket Kit is to be used with aftermarket stud-mounted turn signals and is sold separately.
1
2
3
4
5
6
7
8
9
10

Removal
Installation
1. Install (No. 3) HB025024-C, fender eliminator
light to (No. 1) 13300-FEBKT-A, fender
eliminator light bracket.
2. Install (No. 1) 13300-FEBKT-A, fender eliminator
light bracket and (No. 2) 13300-FEBKT-B,
license plate bracket to frame using the two
stock fender bolts and washers.
3. Install stock left and right turn signals onto
(No. 5,6) 13300-TSB-L/R, turn signal brackets.
4. Install (No. 5,6) 13300-TSB-L/R, left and right
turn signal brackets and (No. 4) 070BG-LPF,
license plate frame using the (No. 7,8)
M6X18BHS and M6X16BHS, 6mm button head
screws as shown.
5. Re-connect tail light and turn signal connectors.
6. Re-install tail using the stock bolts.
7. Re-install rider seat.
8. Check for proper function of license plate light
and turn signals and that all brackets and
components are secure prior to riding.
3
1. Remove rider seat.
2. Remove tail by removing the two bolts securing
tail to frame from above.
3. Locate and disconnect the tail light and turn
signal connectors.
4. While securely supporting the stock fender
assembly, remove the four bolts securing the
fender assembly to frame. Carefully remove the
stock fender assembly making sure not to
damage the connectors in the process.
5. Disassemble the stock fender assembly and
remove left and right turn signals from fender
assembly.
510
9
6
4
8
7
1
3
2
1