You Ting Technology FSWH02TA User manual

WirelessHDMItransmissionSystem
User Manual V1.0
Transmitter: FSWH02TA Receiver: FSWH02RA Transmitter: FSWH02TB
ProductTypes
Type A
TX: FSWH02TA
RX: FSWH02RA
Applications: Passing through walls request
Type B
TX: FSWH02TB
RX: FSWH02RA
Applications: Portable request

1
Thanks for purchasing this wireless HDMI transmission system. Please read the
following instructions carefully for your safety and prevention of properly damage.
zDo not use this product in the extreme hot, cold, dusty or humid environments.
zPrevent friction with hard objects, or it may lead to surface abrasion,
components fall off or hardware damage.
zAvoid the product falling down from a high place, or it may damage the
hardware.
zThe product is not water proofed. So do not get any liquid into the unit please.
zDo not wipe the surface of the product with alcohol, benzene or thinners.
zDo not dismantle, assemble or alter the product arbitrarily.
zWhen the product is operating, the surface temperature will increase slightly.
This is normal.

2
Introduction
Wireless HDMI transmission system runs at 5GHz operation frequency to deliver
uncompressed HD video and audio 50 meters in open field. This system make
wireless connection by using WHDI technology from HD media source devices, such
as Blue-Ray player, PC, game console, set top box to display device, such as LCD TV,
projector, etc, while keeps HD quality and no latency.
Features
zExtends HDMI signals up to 50 meters (Open space). *
zSupports Full HD 1080p signals.
zReal-time uncompressed audio is embedded within output stream.
zSuitable for use with home cinema and computer equipments.
zInternal or extends IR and CEC signals for remote control of AV equipments.
zConnect to PC/player/game box with HDMI port conveniently.
zSupporting the point-point transmission function currently which can be
expanded to the multi-point to point transmission function.
* Actual distances will depend entirely on the construction of building and any walls
or floors that are situated between the transmitter and receiver units.
Packinglist
TypeA(FSWH02TA+FSWH02RA)TypeB(FSWH02TB+FSWH02RA)
1 X wireless HDMI transmitter (TX) 1 X wireless HDMI transmitter (TX)
1 X wireless HDMI receiver (RX) 1 X wireless HDMI receiver (RX)
1 X Remote controller 1 X Remote controller
2 X DC 5V power adapters for TX/RX 2 X DC 5V power adapters for TX/RX
1 X IR extension cable 1 X HDMI adapter
2 X USB cable 2 X USB cable
2 X HDMI cables 1 X HDMI cables
2X Dock base 1 X Dock base
1X User manual 1 X User manual

3
Productoverview

WirelessHDMITransmitterUnit(FSWH02TA)

4

WirelessHDMIReceiverUnit(FSWH02RA)
WirelessHDMIStickTransmitterUnit(FSWH02TB)

5
Gettingstarted
It is ideal when your media player is located in your living room, while you want to
watch your full HD movies on your LCD, plasma or LED television in your bedroom.
You need to install the wireless HDMI transmission system and enjoy it. Furthermore,
you can operate the media player with other original remote control in your
bedroom.
Important! Before staring the installation, ensure the all devices are powered off.
The following steps are for an installation using HDMI equipment, if you using DVI
equipment you should substitute the HDMI cables for DVI to HDMI cables where
required.

6
TypeA(FSWH02TA+FSWH02RA)installation
zPlace the transmitter unit (FSWH02TA) near your HDMI media source device.
Connect the HDMI media source device to the HDMI port of the transmitter by
using a standard HDMI cable (included).
zConnect the IR extension cable to the IR port on the transmitter unit
(transmitter has internal IR repeater. If it is hard to face your media source
device IR receiver, choose external IR).
zPlace the other end of the IR extension cable near the IR port of your HDMI
media device (If choosing internal IR repeater, ignore this step).
zPlace the receiver unit (FSWH02RA) near your HDMI displayer or projector.
Connect your HDMI displayer or projector to the HDMI output port of the
receiver unit by using a standard HDMI cable (included).
zConnect the power adapter (included) to the DC 5V input ports of the
transmitter and receiver by using standard USB cable (included).
Once these steps have been completed the system is ready to use.

7
TypeB(FSWH02TB+FSWH02RA)installation
zPlace connect the stick transmitter (FSWH02TB) to HDMI port of your media
source device (90°converter is selectable).
zPlace the receiver (FSWH02RA) near your HDMI displayer or projector, connect
your HDMI displayer or projector to the HDMI output port of the receiver by
using standard HDMI cable (included).
zConnect the stick transmitter USB port and PC USB port with USB cable
(included). *
zConnect the power adapter (included) to DC 5V input port of the receiver.
Once these steps have been completed, the system is ready to use.
* If your PC USB port doesn’t have 800mA current output capability, connect power
adapter (included) to stick USB port.

8
Operation
Once all equipments are powered on, it is shown by the blue link LED (refer to below
table). Then system will initiate a wireless link, successful connection of the link will
be shown by the blue link LED (refer to below table). This may take short time
depending on the distance between the units and other environmental factors.
When the initial wireless link has been established, the system will establish a video
link between the transmitter and receiver. Once it has been completed, the blue
video LED will be lit on both units (refer to below table *). If your HDMI source and
display devices support CEC then your source device can simply to control using the
displays remote control.
LEDSTATUS MEANING
Link LED slow flicker (TX, RX, stick) Power on
Link LED fast flicker (TX, RX, stick) Establishing link
Link LED lighting (TX, RX, stick) Established link
Video LED lighting (TX, RX) * Established video link
TX: FSWH02TA
RX: FSWH02RA
Stick: FSWH02TB
* Stick doesn’t have video LED.
IRrepeaterfunction(OnlyforTypeA)
You can control your media source device remotely using the IR function.
Ensure that the internal IR port on the receiver unit is positioned to remote
controller.
1. Position the internal IR port of transmitter near the IR port of your media source
device.
2. If internal IR port of transmitter is hard to face your media source device,
connect the supplied external IR repeater cable to the external IR input on the
transmitter unit.
You can control your source device from the display side, using the source remote
controller.

9
Remotecontroloperation
REG Registration (OnlyfortypeA)
MENU Enter to setup mode
EXIT Exit setup mode
SOURCE Wireless transmitter source list
ADD Searching and adding a new
wireless transmitter
DELETE Delete a wireless transmitter
OK Confirm key
1 2 3 Change to source 1 2 3
×ÕÖØ Move cursor
CAUTION: Remove the paper from battery room please when you use controller first
time.

10
Use enclosed remote control to search and add a new transmitter to delete a
transmitter. Use your remote controller point to transmitter.
Press the remote control MENU button, HDMI display show
WirelessHDMIreceiverunit(RX)menu
You can choose “Modify Video Source Name” to change existing transmitter’s name
with ×ÕÖØ buttons.
Addawirelesstransmitter
1. Press ADD button of the remote controller facing receiver, displayer shows

11
2. TypeA: Press and hold REG button of the remote controller facing transmitter
until link LED fast flicker.
TypeB: Press pair button of stick until link LED fast flicker.
Displayer show
Then press OK button of remote controller facing receiver.
* “TX” means the name of your transmitter. It might be different in your device.
3. If show
the link is successful.

12
Selectawirelesstransmitter
Press the remote control SOURCE button facing receiver, displayer shows
Use ×Ø buttons to select a transmitter facing receiver, and then press the OK
button.
Deleteawirelesstransmitter:
Press the remote control DELETE button, HDMI display show,
Use ×Ø buttons to select a transmitter facing receiver, and then press the OK
button.

13
Generalspecifications
Video format support TV: 1080P, 1080i, 720P, 576p, 480p up to 60Hz
PC: up to 1920x1080Pixles up to 60Hz
Audio format support PCM, DTS, DOLBY DIGITAL
RF communication system MIMO
Modulation OFDM
Image delay Less than 1ms
Antenna High performance internal antennas
Operation frequency 5.1GHz to 5.9GHz
Maximum transmission power 15 ±2dBm
IR carrier modulation
frequency support
38KHz
Power supply AC input 100~240V, DC output 5V
Operation temperature 0 ~ 40°C










14
Troubleshooting
ThelinkLEDisnotlit
Check power supply, or change positions of transmitter and receiver.
Can’testablishlinkwhenaddinganewtransmitter
Reduce the distance (at least more than 1 meter) between the transmitter and
receiver units and then reconnect adapter.
Can’testablishlinkwhenconnectingaexistingtransmitter
1. Reduce the distance (at least more than 1 meter) between the transmitter and
receiver units and then reconnect adapter.
2. If it is not workable after step 1, press REG button of remote controller facing
transmitter (don’tholdREGbutton).
3. If it is not workable after step 1 and step 2, delete the source and re-add it.
ThevideoLEDisnotlit
Check video source and HDMI cables.

Thescreenisblank
Check displayer video input channel, HDMI cables.

TheIRrepeaterdoesnotwork
Check the internal IR port (external IR repeater) if it faces to video source IR port.

WEEEDirective&ProductDisposal
At the end of its serviceable life, this product should not be treated as
household or general waste. It should be handed over to the applicable
collection point for the recycling of electrical and electronic equipment, or
returned to the supplier for disposal.