YUNEEC Breeze FPV User manual

· PlEASE
DO NOT
RETURN YOUR
· ITEM TO THE
I~
. RETAILER
THANK YOU FOR YOUR PURCHASE
IF SOMETHING IS MISSING
OR DAMAGED, OR YOU NEED HELP
WITH THIS PRODUCT, PLEASE
CONTACT US.
PLEASE CALL: 844-898-6332
OR EMAIL US AT
USCS@YU NEECUSA.COM

Breeze
FPV
Controller
EN Breeze FPV Controller USER MANUAL
FR Controleur FPV Breeze MANUEL D'UTILISATION
DE Breeze FPV-Controller BEDIENUNGSANLEITUNG
IT Controller FPV di Breeze MANUALE D'USO
ES Manda FPV del Breeze MANUAL DEL USUARIO
CN Breeze FPV Controller
ff,E§i)(,BJ3

INTRODUCTION
Breeze FPV Controller allows users to pilot their Breeze in a new way. The portable Game Controller is connected to the smart
device via Bluetooth, and enables users to control the Breeze accurately with physical joysticks and buttons. It is compatible
with the Breeze Cam application (Breeze
Cam
is a remote control application
for
Breeze) on iOS devices (above iOS 8.0
version) and Android devices (above 4.4 version
),
so you can use them instead
of
the touch screen
of
your smart device to
control the Breeze. Meanwhile, it turns your smart device into a display screen, giving you an immersive and uninterrupted flight
experience. The Breeze FPV Controller features two view modes: FPV Mode and Normal Mode. You can view the images
through the FPV Goggles or from your smart device mounted
on
the controller.
OVERVIEW
05
01
L2
: Switch to Mobile Phone Cam
02 L
1: Photo/Video Mode Switch
03
R2
: Help
01
03 04 R
1: Take Still Photo/Video Recording
02 04 05 Charging port
II

15
06 14
13
07
08-12
11
09-
16 17
06 Gimbal Tilt Trim
07
Drone Yaw Trim
08 Altitude/Throttle Control
09 Yaw/Rudder Control
10 PowerButton
11
Roll/Aileron Control
12
Pitch/Elevator Control
13 B: Parameters Hidden
14 Y: GO HOME
15 Start Button:
Press the Start Button for 3 seconds to take off
Press the Start Button to land/cancel landing during flight
16 Indicator Light
G)
17 Indicator Light ®

SPECIFICATIONS
• Working Platforms: iOS/Android • Charging Current: 1A-2A
• Working Temperatures:
-20-65
• Working Distance: Approx.7M
• Working Humidity:
20-80%
• Battery Capacity: 600mA
• Connection Types: Bluetooth • Product Size: 160 x 104 x59mm
• Charging Voltage:
3.7-5
.
2V
• Net Weight: 189g
• Charging Time: 2-3H
PREPARATIONS
1. CHARGING THE
BATIERY
(1
) Charge under connection state
After connecting the charging cable, Power button and ABXY lights flash once/2 seconds, and the lights keep on when
fully charged.
(2) Charge under sleeping state
After connecting the charging cable, the
Game
Controller turns on and enters
current mode, no signal receiving
after
1 minute, mode lights turn
off
. Power
button and ABXY lights start flashing, and the lights keep on when fully charged.
(3) Low Battery Indication
Power button and
AB~Y
lights flash once/second.
NOTICE: The Game Controller enters sleep state after 1-minute disconnection.
NOTICE: The Game Controller enters sleep state after 5-minute
no
action.
f
..
.
••
•
USB
•.
.. $
~
~
~
··
.
Y

& Battery Warnings:
•
To
charge the LiPo battery, you must only use the included charger.
• Do not over-discharge the LiPo battery.
• Ifat any time the LiPo battery begins to balloon
or
swell, discontinue charging ordischarging immediately.
• Always terminate all processes ifthe battery/charger malfunctions.
• Store the LiPo battery at room temperature and
in
a dry area for best results.
• Allow the LiPo battery to cool to ambient/room temperature before recharging.
• Never charge the LiPo battery unattended at any time.
2. POWERING ON/OFF & CONNECTION PREPARATION
(1) Power on: Press Power button for 2 seconds to start the Game Controller.
(2) Power off: Press Power button for 5 seconds to power off the Game Controller.
(3) Connection Preparation
Connection Preparation for iOS platform:
Step 1) Press Y and then Power button for 2 seconds to start the Game Controller.
Step 2) The indicator light ® flashes.
Connection Preparation forAndroid Platform:
Step 1) Press the A button anp then Power button for 2 seconds to start the controller.
Step 2) The indicator light
CD
flashes.
NOTICE: When the indicator light
CD
or the indicator
light®
flashes, the Game Controller enters the "Connection" mode,
and the Game Controller
is
ready to be paired with your smart device via Bluetooth.

3.
DOWNLOADING THE BREEZE CAM APPLICATION
Download the Breeze Cam application
on
your smart device, available for
free on the App Store and Google Play Store. 0
Ava
ilable
on
the
AppStore
Coogle
p
lay

4.
BREEZE CONNECTION
Power on your Breeze on a flat and stable surface and wait for it
to complete initialization. When the LED indicator blinks blue
rapidly, Breeze has entered the "Wi-Fi" bind mode.
METHOD
1:
If
you
are
using
an
iPhone
,
select
Settings
>
Wi-Fi ;
If
you are using an Android smart phone, select Settings
>
Wireless
and
networks
>
Wi-Fi.
Select
the
network
:
BreezeXXXXXX and enter the Password: 1234567890.
METHOD 2: Tap [ ] icon
in
the
upper
right corner and you
can
connect
the
Wi-Fi
network
directly
.
Select
the network:
BreezeXXXXXX and enter the Password: 1234567890.
5.
UNDERSTANDING
THE
VIEW
MODES
WITH
GAME
CONTROLLER
(1) FPV MODE
Step
1)
Tap
the [ ] icon to enter the TASK page.
•••
60.
Breeze

Step
2)
There are 6 Flight Modes for you to select in the Task
page.
To
enterthe FPV Mode, you can select the [ 8 ]icon.
Step 3) Slide
the
"SLIDE TO
PROCEED
"
bar
to
confirm that
you have entered the FPV Mode.
areeze
?
Before
GPS
is ready,
only
Ptlotrnode
and
FPV
mot.1e
t:ao
be
uaed