YX YX Series User manual

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 1 ~
YX
Series GoIP User Manual
V4.7
YX Technical department
29th November, 2016
www.yx19999.com; www.yx19999.net
Huizhou :Huizhou YueXun Network Technology Co., Ltd (YX)
Hong Kong: YX International Information Co., Ltd
TEL: [phone] FAX: [phone]
Email: [email protected],[email protected]
Address: 613,Bomeitang Building,NO.13 Maixin Road, Huicheng District, Huizhou,
Guangdong, China

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 2 ~
CONTENT
1 Introduction...........................................................................................................................5
1.1 Overview............................................................................................................................5
1.2 Glossary.............................................................................................................................5
2 Equipment Information..........................................................................................................6
2.1 Product Brief......................................................................................................................6
2.2 Appearance .......................................................................................................................6
2.3 Special Features................................................................................................................7
2.4 Specification ......................................................................................................................8
2.5 Mobile Features.................................................................................................................9
2.6 Maintenance and Management........................................................................................10
3 Equipment Installation......................................................................................................10
3.1 Network Setup .................................................................................................................10
3.2 Equipment IP Address .....................................................................................................11
3.3 Equipment Connection.....................................................................................................11
3.4 LED Indicators .................................................................................................................11
4 Web Settings .....................................................................................................................11
4.1 Login................................................................................................................................11
5 Guider ................................................................................................................................13
6 Status Information.............................................................................................................14
6.1.1 Call Status .............................................................................................................14
6.1.2 Call Statistics.........................................................................................................15
6.2 Device Status(SIP and Module) .......................................................................................16
6.3 System Status..................................................................................................................17
6.4 InterCall Statistics............................................................................................................17
7 Gateway Settings ..............................................................................................................18
7.1 Network Settings..............................................................................................................18

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 3 ~
7.2 Phone Book.....................................................................................................................18
7.3 SIP Setting.......................................................................................................................20
7.4 Port Setting......................................................................................................................24
7.4.1 USSD Operations ..................................................................................................24
7.4.2 Base Station ..........................................................................................................25
7.4.3 Hardware properties ..............................................................................................26
7.5 Basic Station....................................................................................................................26
7.5.1 Basic Settings........................................................................................................26
7.5.2 Base stations Settings/Operations.........................................................................27
7.6 IMEI Setting.....................................................................................................................28
7.7 Rules Setting ...................................................................................................................29
7.7.1 Dialing Plan............................................................................................................29
7.7.2 Prefix .....................................................................................................................29
7.7.3 Calls black and White list.......................................................................................31
7.8 Mobile Setting..................................................................................................................31
7.8.1 PIN Setting.............................................................................................................31
7.8.2 Billing Setting.........................................................................................................32
7.8.3 Provider and USSD Query Keyword List................................................................32
7.8.4 Tariff List................................................................................................................33
7.9 SMS Setting.....................................................................................................................34
7.9.1 SMS Receive.........................................................................................................34
7.9.2 SMS Send..............................................................................................................35
7.10 USSD Setting.................................................................................................................37
7.11 Automation.....................................................................................................................38
7.11.1 Scheduled Sending sms ......................................................................................38
7.11.2 Accumulated Call Duration Checking...................................................................39
7.11.3 Accumulated Connected Calls Checking..............................................................39

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 4 ~
7.11.4 Accumulated Calls Checking................................................................................39
7.11.5 Consecutive Failed Calls Checking......................................................................40
7.11.6 Consecutive No-Alert Calls Checking...................................................................40
7.11.7 Consecutive No-Answer Calls Checking..............................................................40
7.11.8 Consecutive No Carrier Calls Checking ...............................................................41
7.11.9 Consecutive Short-Duration Calls Checking.........................................................41
7.12 InterCall Setting .............................................................................................................41
7.12.1 Port Inter-Calling..................................................................................................41
7.12.2 Conditions Settings..............................................................................................42
7.12.3 SIM Num Settings................................................................................................42
7.13 Call Duration Settings ....................................................................................................43
8 System Setting..................................................................................................................44
8.1 Voice and Codec..............................................................................................................44
8.2 Network Debug................................................................................................................45
8.3 User & Device..................................................................................................................46
8.3.1 User.......................................................................................................................46
8.3.2 Device Settings......................................................................................................47
8.3.3 Date And Time.......................................................................................................48
8.3.4 Remote Mangement...............................................................................................48
8.4 Update/ backup & Restore...............................................................................................48
8.5 Save & Reboot.................................................................................................................49
9 Typical Used Scenario......................................................................................................50
9.1 Landing from IP to Mobile Network ..................................................................................50
9.2 Access from Mobile Network to IP....................................................................................51

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 5 ~
1 Introduction
1.1 Overview
A VoIP GSM Gateway (GoIP Gateway) is a device which reduces costs when calling from a fixed
telephone line to mobile network. It enables direct routing between IP, digital, analog and mobile
networks.
GoIP Gateway is now used more and more for telephone carriers to land their IP calls to mobile
network. In those areas where fixed line services are unavailable or much more expensive than the
mobile cost, GoIP Gateway is an irreplaceable alternative.
The following figure shows a basic topology of GoIP Gateway usage.
1.2 Glossary
VoIP: Voice over Internet Protocol.
SIP: Session Initial Protocol.
DTMF: Dual Tone Multiple Frequency.
IMEI: International Mobile Equipment Identity (with15 digits).
ASR: Answer Seizure Ratio.
ACD: Average Call Duration.
PDD: Post Dial Delay.
LCR: Least Cost Routing.
USSD: Unstructured Supplementary Service Data. GSM: Global System Communications.
CDMA: Code Division Multiple Access.
WCDMA: Wideband Code Division Multiple Access.

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 6 ~
2 Equipment Information
2.1 Product Brief
YX GSM/CDMA/WCDMA series VoIP Gateway is a multi-functional and high performance
product, which is designed with advanced embedded technology. YX series is able to process
traditional voice call service and internet data service. perfectly support G729a/b/e、G723.1、G.711
a/u law and iLBC codecs at the same time.
YX series VoIP Gateway please check the following table about the difference:
Model Number
Channel
Sim capacity in
each channel
Total sim capacity
YX4-4
4
1
4
YX 8-8
8
1
8
YX 8-32
8
4
32
YX 16-16
16
1
16
YX 16-64
16
4
64
YX 16-128
16
8
128
YX 16-256
16
16
256
YX 32-32
32
1
32
YX 32-128
32
4
128
YX 32-256
32
8
256
2.2 Appearance
YX16-16 and YX16-64

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 7 ~
YX32-32 and YX32-128
16 or 32 Antennas
1 USB Serial Port (Baudrate 115200)
2 Network Interface (RJ45)
1 Power Interface (DC 12V 5A or 8A)
1 Reset Button
16/32/64/128 sim card slots
16/32/64/128 LED lights
2.3 Special Features
Support G729a/b/e,G723.1,G.711 A/U law, iLBC auto-selecting
BO(Bandwidth Optimization)

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 8 ~
Proxy Encryption Solution for IP Block
Support SIM Bank
VPN(pptp)
SIM Card Rotating(YX 8-32/YX 16-64/YX 16-128/YX 16-256/YX 32-128/YX 32-256)
Solution to solve the SIM card blocked by:
Accumulated Call Duration
Accumulated Connected Calls
Accumulated Calls
Consecutive Failed Calls
Consecutive No-Alert Calls
Consecutive No-Answer Calls
Consecutive No Carrier Calls
Consecutive Short-Duration Calls
Consecutive Fast-Alerting Calls Checking
Consecutive Fast-Answer Calls Checking
Consecutive GSM Release Cause Checking
Accumulated SMS Count Checking
Accumulated Failed SMS Count Checking
Consecutive Failed SMS Count Checking
Station intelligent switching
RMS(Remote Management System)
Port Inter-Calling
Fake Ringback
Call Duration Limitation for SIM Card/Single
Dial Plan/Prefix Inward Translation/Intelligent Routing
Web Browser: Firefox/Chrome /IE/Opera
2.4 Specification
Model
YX4-4/YX 8-8/YX 8-32/YX 16-16/YX 16-64/YX 16-128/YX
16-256/YX 32-32/YX 32-128/YX 32-256
Number of Channels
4 or 8 or 16 or 32channels
Frequency
GSM: YX GOIP Optional List（Real-time）
CDMA: YX GOIP Optional List（Real-time）
WCDMA: YX GOIP Optional List（Real-time）
4 G: YX GOIP Optional List（Real-time）

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 9 ~
SIP Specification
SIP/2.0 RFC3261
Session Timer RFC4028
STUN
Network Protocols
DHCP/PPPoE/VPN(pptp)
NTP Telnet/HTTP/FTP/TFTP
Encryption:YX,VOS2000,RC4,XOP.Base64
Telephony Features
Hot-line call ,Dial plan, Speed dial, Phone book, CDR, LCR,
White/Black list
Telephony Signaling
DTMF tone dectection/generation
DTMF relay: in-band, RFC 2833 and SIP info
Call forward: unconditional, no answer and busy
N-way conferencing
Caller ID display/generation, Mobile Number Portability
Voice Capability
Voice codecs:G729a/b/e,G723.1,G.711 A/U law, iLBC
Echo cancellation
Silence suppression & detection（VAD, CNG）
Adaptive jitter buffer
Volume adjustable
IVR customized
Number of Ports
1 WAN 10/100Base-T ethernet(RJ-45 connector)
1 LAN 10/100Base-T ethernet(RJ-45 connector)(YX32 not the port)
1 Console(USB)
LEDs
1 Power and 16 or 32groups of card online and running status
indicator
Power Supply
100-240VAC, 50 - 60 Hz IN, 12VDC/5A or 8A Out
Operating
Environment
Operating temperature: 0 - 50ºC
Operating humidity: 10 –90%RH
Warranty
12 Months
2.5 Mobile Features
SMS Send, Receive and Forward(GSM/SIP/HTTP)
SMS Inbox
AT Command , USSD
SMS Format: PDU/TXT
PIN Code Management
CDMA Delay Answer
GSM Polarity Reversal
Carrier Selection
Caller ID Hidden(need SIM Card support)

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 10 ~
2.6 Maintenance and Management
Multi-language Interface
USB Serial COM
Configuration Backup and Restore
Support HTTP/TFTP Upgrade
Call statistics: ASR,ACD,PDD
WEB Remote Management System
3 Equipment Installation
This chapter describes how to install a new GoIP Gateway to a physical network environment,
how to initialize it and start it in a proper way.
3.1 Network Setup
Network is a prerequisite to install GoIP Gateway. The following figure shows the topology of
Network with a VoIP Gateway connected.
Switch/Router
WAN
IP Network

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 11 ~
3.2 Equipment IP Address
The default IP of GoIP Gateway WAN port is 192.168.1.10, while the default LAN port IP is
10.10.10.1(The Version not up the LAN port).
3.3 Equipment Connection
Follow the steps below to install the GoIP Gateway to Network.
1) Fix the antenna to the GoIP Gateway. (Optional)
2) Insert SIM card(s) to slots.
3) Connect an Ethernet Cable to the WAN port of GoIP Gateway. The other end of the
Ethernet Cable should be connected to Network port of route or switch.
4) Connect an Ethernet Cable to the Network port of GoIP Gateway. The other end of the
Ethernet Cable should be connected to PC or other network device. (Optional)
5) Plug in the GoIP Gateway.
3.4 LED Indicators
There are a set of LED lights in the front of GoIP Gateway. Lights will be on or glittering when the
GoIP Gateway is power on and running. The following table describes various meanings of status
corresponding to LED lights in different display color.
Power
It indicates whether the system is running or not.
Calling
It indicates which module is calling.
Chosen card
It indicates was chosen.
4 Web Settings
This chapter describes how to set up GoIP Gateway through Web Page. There is a built-in web
server which can be accessed at URL: http://GATEWAY_IP/, while GATEWAY_IP is the WAN IP
address of the GoIP Gateway, such as 192.168.1.10.
As an example, the following introduction will base on the GoIP Gateway with WAN IP
192.168.1.10.
4.1 Login
First, connect a computer to the same LAN with GoIP, add the GoIP IP segment in the
computer.

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 12 ~
If your computer's IP address is not 192.168.1. XXX, how to change:
Save it

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 13 ~
Open web browser and access URL http://192.168.1.10. The default login page will be displayed
as following.
The default login account and password are:
Account
root
Password
root
It is recommended to use IE or FireFox to access the web pages. After successfully logged in, the
main page to set Gateway is as following:
5 Guider
Guider will be described in this paragraph. The most frequently modified parameters and most of
the individual parameters are listed in this page.

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 14 ~
WAN port is to connect to switch or route then you can use PC that on the same LAN network to
login. There’s three types of wan connect.
Static IP: You can set WAN IP,IP Mask, Default Gateway and DNS Server of WAN port to
connect the Internet.
Dynamic IP: You can get IP address ,IP Mask ,Default Gateway and DNS Server dynamically from
your DHCP server.
PPPoE: In this mode,you can use GOIP device to dail-up network. You can set User Name and
Password which you get from your ISP. And you also can set MTU and Service Name.
SIP Server Settings is for SIP communication with IP network. Fields are specified as following:
Protocol Mode: Specify SIP client working mode. Option values are
Registration/Point-to-Point. If set to Registration, SIP client will send registration messages
to SIP server.
SIP Server IP: Specify the IP of SIP server.
SIP Server Port: Specify the port of SIP server.
Phone Number: Specify the caller phone number for SIP client. It can also be regarded as
the SIP port number which can be called.
Account: Specify the SIP account for registration.
Password: Specify the SIP password for registration.
Note: The settings of Phone Number, Account and Password are globally active. They will apply to
all SIP ports settings in SIP Protocol page.
6 Status Information
6.1.1 Call Status
The screenshot below shows the live call status.

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 15 ~
The status columns are specified as following:
Port No: The physical port sequence from 1 to 32.
Call State: Specify the call status.
Duration: Specify the call duration.
Balance: Specify the current balance of the card in this port.
SIM Led: shows the GoIP Gateway port LED status. Different LED
Provider: The mobile provider that system detects.
Signal Intensity: Specify the mobile signal intensity.
ASR: Shows the port of ASR statistics.
ACD: Shows the port of ACD statistics.
Description: Specify the card dialing number status.
Clear Data: Clear ASR and ACD data, restart statistics.
Note:
LED A/B/C/D displays in accordance with the lights on the front board of GoIP Gateway. Port 1 to
32 relate to the physical port of GoIP Gateway. The following table shows the relationship between
LED color and port status.
6.1.2 Call Statistics
The screenshot below shows the call statistics information for analysis.

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 16 ~
The status columns are specified as following:
Port No: The physical port sequence from 1 to 32.
Calls: Specify the total calls made out from this port since the last start up of system.
Alerted: Specify the total number of responded alerting message for all the calls made.
Connected: Specify the total number of answer from destination for all the calls made.
Consecutive Fails: Specify the consecutive fail calls.
No Carriers: Specify the no carrier.
PDD: Specify the average duration to receive the response of alerting message.
Tot CallDur: The port total calls duration used out from this port since the last start up of
system.
Clear Data: Clear all data, restart statistics.
A total summary is displayed at the bottom of the table.
6.2 Device Status(SIP and Module)
The screenshot below shows the SIP and Module status.
The status columns are specified as following:

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 17 ~
Port No: The physical port sequence from 1 to 32.
Registration Status: Shows the port registration to SIP server infomation status.
Module Status: Shows the port Module use status(Yes/No).
IMEI: Specify the port current using of IMEI.
6.3 System Status
The screenshot below shows the system status. It includes WAN status, LAN status and others.
The reported information can help you get the system status detail in a fast, simple way.
6.4 InterCall Statistics
The status columns are specified as following:
Port No: The physical port sequence from 1 to 32.
State: Specify the call status.
Duration: Specify the call duration.
Inc calls: Specify the total incoming calls since the last start up of inter calling system.
Out Calls: Specify the total outgoing calls since the last start up of the inter calling system.

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 18 ~
Rcvd SMS: Specify the total received SMSs since the last start up of the system.
Sent SMS: Specify the total sent SMSs since the last start up of the system.
Descriptions: Specify the card status.
7 Gateway Settings
7.1 Network Settings
The screenshot below shows the operation mode to set VPN settings, and the protocol of vpn is
pptp.
Fields are specified as following:
VPN Support: Whether support vpn or not.
Server Address: Specify the vpn server address.
Usename: Specify the username of vpn.
Password: Specify the password of vpn.
Local IP: The VPN client ip.
Remote IP: The VPN remote ip
The default port of web server is 80. The field Web Port is used to set another different port for
web server. For example, if fieldWeb Port is set to 8080 and wan IP is 192.168.1.10, the web pages
then should be accessed through URL: http://192.168.1.10:8080 from this computer.
The field Telnet Port is used to change the default port of telnet service.
7.2 Phone Book
(IP to IP calls)
The screenshot below shows the operation mode to set phone book. Phone book is a list contains
the relationship between destination phone prefix and gateway information.

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 19 ~
Add New
Click button Add New to expand the data input area to add new data. Fields are specified as
following:
Data status: Mark the status of current data record. Option values are Add/Edit. Value Add
means the data is new while value Edit means the data is old.
Remote Gateway ID: Specify the prefix of destination number for outbound call to IP. If a
destination is best matched with any prefix in phone book, the destination call will be routed
to the IP gateway specified by Gateway IP and Gateway Port.
Gateway IP: The remote gateway IP.
Gateway Port: The remote gateway port.
Click button Submit on the right to save the new data record.
Edit
All the phone book records are displayed in list. Two operations are provided on the right of each
record. Click Edit to expand the current data record to Data Detail Area which is above the Data
List.
Click button Submit on the right to save the old data record.
Delete
Click Delete on the right of each record to delete the current record. A message box will be
popped for delete confirmation.
Another shortcut button is also provided on the top right of Data List to delete multiple selected
records in batch. A message box will be popped for confirmation of batch delete.
Note: The operations Add New/Edit/Delete/Batch Delete mentioned in the following paragraph
are almost the same as phone book.
If you changed the data, take effect after reboot the gateway

GSM/CDMA/WCDMA VoIP Gateway
YX Technical department ~ 20 ~
7.3 SIP Setting
SIP Settings will be described in this paragraph. It mainly targets to set up parameters related to
SIP server, SIP account and SIP password for SIP registration.
The screenshot below shows the operation mode to set SIP running parameters.
Fields are specified as following:
Protocol Mode: Specify SIP client working mode. Option values are
Registration/Point-to-Point/Multiple Port Support. If set to Registration, SIP client will send
registration messages to SIP server. If set to Point-to-Point, o nly can let the input server IP
traffic, if multiple IP, can increase in the phone book. If set Multiple Port Suppor, specify
whether support to register to SIP server with different SIP Account, input in “SIP
Accounts”.
Encryption Mode: Specify the encryption method for messages between SIP server and
SIP client.
Account: Specify the SIP account for registration.
Password: Specify the SIP password for registration.
SIP Server: Specify the domain or IP of the SIP Server.
SIP Server Port: Specify the port of the SIP Server.
Primary Proxy IP: Specify the primary proxy IP.
Secondary Proxy IP: Specify the secondary proxy IP.
Expiration Period: Specify the expiration period for registration.
Local Port: Specify the local port used to register to SIP server.
Use Phone Number: Specify whether enable phone number registration or not. If set to
Enabled, the Phone Number and Account can be different when registering to SIP Server.
If set to Disabled, the Phone Number must be the same as the Account when registering,
otherwise, the registration will fail.