ZALMAN Z-MACHINE GT1000 User manual

English
Z-MACHINE GT1000
◈Please read this manual thoroughly before installation.
◈Visit our website and view the Z-MACHIN GT1000 installation video first to
ease the installation process.
www.zalman.co.kr www.zalmanusa.com
English v rsion
www.zalman.co.kr www.zalmanusa.com

2
Z-MACHINE GT1000
The specifications of any product may change without prior notice to improve performance.
▣Tabl of Cont nts
1. Saf ty Notic s 3
2. Compon nts 4
3. Sp cifications 6
4. Front Pan l Buttons and I/O Ports 7
5. Installation Guid 8

3
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT1000
English
1
Safety Notices
(1) Check the condition of the product and its components before installation. If
there is a problem with the product and/or its components, please contact the
retailer for replacement.
(2) Avoid inserting any objects into the system while the power is ON. It may be
harmful for the user and product.
(3) Check the manual when connecting cables. Incorrect
connections can lead to fire resulting from short circuit.
(4) The vents on the front and rear panels must not be blocked.
(5) Keep this unit away from heat sources and direct sunlight, as well as from
water, oil, and humidity. Place the unit on a flat, leveled, solid, and well-
ventilated area.
(6) Do not clean the product surface with chemicals or wet cloth. (chemicals:
industrial brightener, wax, benzene, alcohol, paint thinner, mosquito
repellent, aromatics, lubricant, detergent etc.)
Disclaim r
Zalman Tech Co., Ltd. is not responsible for an damages due to
external causes, including but not limited to, improper use, problems
with electrical power, accident, neglect, alteration, repair, improper
installation, and improper testing.

4
Z-MACHINE GT1000
The specifications of any product may change without prior notice to improve performance.
2
Components
(1) Z-MACHINE GT1000 Main Chassis

5
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT1000
English
DDiiaaggrraammPPaarrtt NNaammeeSSppeecciiffiiccaattiioonnQQttyyFFuunnccttiioonn
3mm
(Silver)
4 * 8
(Black)
Φ6*12*M3*3
(Silver)
PHM
#6-32*10
(Black)
PWHM 3*5
(Black)
PHM 3*8
(Black)
White = 5V
Black = 12V
1
2
2
6
22
2
1
For removing and reinstalling
the Allen Bolts of the Right-F
Plate during ODD installation
Spare Allen Bolts for
enclosure maintenance
For motherboard (microATX)
installation
For PSU installation (For use
with GT1000 only)
For ODD & motherboard
installation
For FDD installation
For Fan RPM adjustment
(2) Parts
(3) ZM-MC1 (Multi Conn ctor)
[ Installation ]
1) ZM-MC1 is a dual voltage adaptor for adjusting the RPM of the front and rear
panel fans. It is connected to the 4-Pin connector of the PSU as shown below.
2) Connect the enclosure fan to a connector with the voltage desired by the user.
(120mm, 92mm FAN).
- 5V : 900 RPM ~ 1200 RPM
- 12V : 1800 RPM ~ 2800 RPM
Allen Wrench
Spare
Allen Bolts
M/B Stand Off
PSU
Screws
ODD, M/B
Screws
FDD Screws
ZM-MC1
(Multi Connector)

6
Z-MACHINE GT1000
The specifications of any product may change without prior notice to improve performance.
3
Specifications
EEnncclloossuurree TTyyppeeTower
EEnncclloossuurree DDiimmeennssiioonnss480mm X 220mm X 450mm
((DD ××WW ××HH))(18.9”× 8.7”× 17.7”)
WWeeiigghhtt12.5kg (27.5lb)
MMaatteerriiaall Aluminum 4~5T
MMootthheerrbbooaarrdd CCoommppaattiibbiilliittyyStandard ATX / microATX
PPSSUU CCoommppaattiibbiilliittyyStandard ATX / ATX12V
PPCCII//AAGGPP CCaarrdd CCoommppaattiibbiilliittyyFull Size
DDrriivvee BBaayyss3.5" Bay × 7
((TTooooll FFrreeee KKiitt pprroovviiddeedd))5.25" Bay × 4
CCoooolliinngg CCoommppoonneennttss
Front Intake Fans : 92mm LED Fan× 2
Rear Exhaust Fan : 120mm LED Fan × 1
EExxppaannssiioonn CCaarrdd SSlloottss7 Slots
((TTooooll FFrreeee BBoollttss pprroovviiddeedd))
USB Port × 2
FFrroonntt II//OO PPoorrttssIEEE1394(Firewire) Port × 1
Headphones × 1
MIC × 1
CCoolloorr OOppttiioonnssTitanium / Black

7
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT1000
English
4
Front Panel Buttons and I/O Ports
①System Power Button
②System Power L D
③System HDD Power L Ds (1~2)
④System Reset Button
⑤Audio (Headphones, MIC), USB 2.0, I 1394 Port
①
②
③
④
⑤

8
Z-MACHINE GT1000
The specifications of any product may change without prior notice to improve performance.
5
Installation Guide
(1) Enclosur Disass mbly
Unscrew the four Bolts (Bolt, FH M3x6) as shown in the diagram to open the
Doors.
(2) Pow r Supply Installation
Place the PSU on the Power Bracket, and screw the four Bolts (Bolt, PHM #6-
32*10 (Black)) from outside the enclosure.
Power Bracket

9
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT1000
English
(3) Moth rboard Installation
Install the motherboard onto the enclosure. Now install the computer
components (CPU, VGA, RAM, etc.) onto the motherboard.
참고)
To install a microATX motherboard, first install the 2 enclosed microATX Stand
Offs to align the height with the ATX Stand Offs.
To install a microATX motherboard,
additional M/B Stand Offs must first be
installed onto the Right Plate before
installing the motherboard.
M/B Stand Off

10
Z-MACHINE GT1000
The specifications of any product may change without prior notice to improve performance.
(4) 5.25" & 3.5" Driv Installation
1) Remove the Bay Covers of the 5.25”(ODD) and 3.5”(FDD) bays.
2) Insert the ODD into a bay, and fix it in place with the Tool Free Bolts.
- ODD Solts No. 3 & 4 and the FDD Slot are designed for using the Fixing
Bolts (Bolt, M3x5).
Right-F Door
ODD Bay
Cover
FDD Bay
Cover
Tool Free Bolt

11
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT1000
English
(5) Hard Disk Driv Installation
1) Basic Installation
①Open (raise) the HDD Lock Bar of the HDD Chassis’Bay where the
HDD will be installed.
②Slide in the HDD into the Bay and close (lower) the HDD Lock Bar
behind the HDD.
③To remove the HDD, open (roll up) the HDD Lock Bar above the
HDD.
Note) Excessive pressure ma damage the HDD Lock Bars. Please
take cautionar measures during HDD installation and
removal.
HDD Lock Bar
Fixing Screw Hole
HDD Lock Bar
Fixing Screw

12
Z-MACHINE GT1000
The specifications of any product may change without prior notice to improve performance.
22)) LLoocckkiinngg IInnssttaallllaattiioonn
Note) For moving the assembled enclosure, please fix the HDD Locking Device
into place as shown on the diagrams.
※Pressing the HDD slightly into the HDD Chassis with one hand, while rotating
the HDD Lock Bar with the other, allows easy alignment of the Lock Groove
and Tool Free Fixing Screw Hole.
Align the Lock Groove of the
HDD Lock Bar with the Tool
Free Fixing Screw Hole.
Unscrew the HDD Lock Bar’s Tool
Free Fixing Screw from the HDD
Chassis.
Screw the Tool Free Fixing Screw into
the Fixing Screw Hole to lock the
HDD Lock Bar into place.
Lock Groove
Tool Free Bolt
Tool Free Fixing
Screw Hole
①②
③④

13
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT1000
English
3) HDD Installation & Removal on the Bottom Panel
①Remove the AVM(Anti Vibration Mount) installed on the Bottom Panel of the
enclosure and install them on the left/right sides of the HDD.
②Check for an available slot on the Bottom Panel, open the AVM Clamps, and
insert the HDD by gently pushing it.
③Once the HDD is completely lodged in place, close the lever to lock the HDD
in place.
Note) xcessive pressure may damage the HDD Lock Bars. Please take cautionary
measures during HDD installation and removal.
①
②
③
AVM(Anti Vibration Mount)
AVM Clamp

14
Z-MACHINE GT1000
The specifications of any product may change without prior notice to improve performance.
(6) Cabl Conn ction
1) Button PCB Connection
※Improper connection of the Power L D and HDD L D can lead to L D
malfunction. Please refer to the motherboard manual before making
cable connections.

15
The specifications of any product may change without prior notice to improve performance.
Z-MACHINE GT1000
English
Note)
2) Front I/O Connections
※Precautions for Cable Connections
▶Please refer to the motherboard manual for connecting the USB 2.0,
I 1394a, and audio connectors.
▶Do not connect the USB2.0 connector to the I 1394a connector. It will
cause serious damage to the product.
▶Do not connect the I 1394a connector to the USB2.0 connector. It will
cause serious damage to the product.
▶Certain motherboards may have a different configuration for the
I 1394a, USB2.0, and audio connectors from the one shown in the
diagram above. Please refer to the motherboard manual.