Zamel gardi SRT-01 User manual

ACCESS CONTROL SYSTEM WITH FACE RECOGNITION AND TEMPERA-
TURE MEASUREMENT SRT-01 USER MANUAL
plik: SRT-01_inst_gardi_GB | modykacja: 29.10.2020
APPEARANCE
TECHNICAL DATA
1. DESCRIPTION
Internal operating system: Linux
RAM: DDR3 8 GB
Data memory: 8 GB
Display: 7” HD IPS
Camera: 2MP, wide-angle 120°, WDR- wide dynamic range,
LED lighting at night
Face recognition time: < 1 second (for datebase with 30 000 faces)
Face recognition index: 99.8%
Number of faces that can be
registered: up to 50 000
Connection to the network: Ethernet Port RJ45 100 m
Communication protocol: TCP/IP
Supply voltage: 12 V DC
Operating temperature range: -10°C to 30°C
Temperature measurement distance: 0,5 m
Accuracy of temperature measurement: ± 0.3°C
Housing protection degree: IP44
Weight: 916 g
Dimensions (without frame): 12 x 23 x 3 cm
Access control system with face re-
cognition system allows granting access
in a very modern and safe way to the
given facility for the authorized person.
It is perfect solution for places like com-
panies, ofces, schools, hotels, public
buildings etc.
The advanced algorithms used in
the reader allows correct recognition of
faces (even wearing a mask!) and based
on this grants access to the selected
rooms, facilities etc. The system is also
equipped with a contactless body tempe-
rature meter, which can limit access for
the person with a fever.
Another interesting feature is voice
reminders about the necessity of we-
aring a mask. When a recognized per-
son enters the room without a mask the
system will remind about the necessity
to wear it.
The device is equipped with relay
output allowing direct connection of elec-
tric strike or other control components for
gates, doors, walk gates etc.
Read the following
instructions carefully
before connecting the
device.
The device should be
connected to grid in ac-
cordance with applicable
standards. The connection method is
described in this manual. Operations
related to: installation, connection and
adjustment should be carried out by qu-
alied electricians, who have read the
user’s manual and know functions of
the equipment. The proper operation
of the device is affected by how the de-
vice is transported, stored, and used.
It is not advisable to install the device
in the following cases: missing compo-
nents, damage to or deformation of the
device. If the device operates impro-
perly, please contact the manufacturer.
The symbol means selective collecting of
electrical and electronic equipment.
It is forbidden to put the used equipment
together with other waste.
Mounting frame
Mounting screw
Device Device
Power supply
Base for
surface
mounting
ZAMEL Sp. z o.o.
ul. Zielona 27, 43-200 Pszczyna, Poland
Tel. [phone], Fax [phone]
www.zamel.com, e-mail: [email protected]
CAUTION

2. INSTALLATION
3. CONNECTORS
4. FIRST START-UP AND CONFIGURATION OF THE NETWORK CONNECTION
The device is supplied as standard with an assembled tubular frame. A bracket for direct surface mounting is also included in the kit.
To mount the device in the surface unscrew the frame with Allen key included in the kit and install the base intended for surface-mo-
unting in its place.
The device can operate autonomously but it is required to connect it to the computer with LAN cable for conguration and
setting purposes. After making all necessary settings it can be disconnected from the computer and it will operate indepen-
dently.
4.1. Connect the device to power supply using power unit included in the set and connect it with RJ45 LAN network cable to any com-
puter with active network card.
After the power supply is connected, the device needs up to several minutes to warm up the sensors before it can measure
the temperature of entering people.
4.2. Enter the available network connections
(Windows 10: Settings > Network and Internet > Ethernet > Change adapter options (Fig.1)).
Mounting frame
Mounting screw
Network connector RJ45
Power supply connector (12 V)
Relay output
(NO/NC dry contact)
device
Device installation on the mounting frame Device installation on the base for surface mounting
Base for surface
mounting
Fig.1
Power supply connector (12 V)Network connector RJ45 Relay output (NO/NC dry contact)

4.3. Right click on the network connection and select „Properties” (Fig.2).
4.4. Search for „Internet protocol version 4 (TCP/IPv4)” in the opened list, select it and press „Properties” button (Fig.3).
4.5. Select „Use the following IP address” in the opened window, enter the IP address and Subnet Mask as shown in Fig.4 and conrm
your selection with OK button.
Fig.2
Fig.3
Fig.4
Rys.4

4.6. Enter the following address in your web browser: 192.168.1.100
To correctly log in to the device the web browser must have „ActiveX” controls active (available only in the Internet Explorer
as a standard). Chrome browser requires the installation of „IE Tab” plug-in (Fig.4) and connection with the device via this
plug-in (Fig.6).
4.7. Download and install the „WebCamera.exe” application after the login window appears. For this purpose:
• click the link below the „Login” button (Fig.7)
• agree to download the application by pressing „Save” button (Fig.8)
• close the web browser after downloading the installed and start the „WebCamera” installer Fig.9 and install the program.
Fig.5
Fig.6
Fig.7
Fig.8
Fig.9

5. LOGIN AND CONFIGURATION
5.1. Logging in to the device
Once you have installed the IE Tab plug-in for Chrome and the WebCamera application as described in section 4 of this manual, you
can now log on to your device. For this purpose:
• Start Chrome browser - activate previously installed IE Tab plug-in (see section 4.6) and enter the address in the IE Tab address bar:
192.168.1.100 which should open the login screen again (Fig.10).
• Enter your login data details (username and password) and click „Login”. The default login data:
Login: admin
Password: 123456
User name and password can be changed after login in the tab: System > User Manager in the settings menu.
5.2. Device conguration
After logging in, you should see the main screen (Fig.11) with the device’s camera preview, the language selection eld, and the gear
wheel symbol that you need to click to go to the device settings.
Fig.10
Fig.11
Fig.12
5.2.1 The most important settings and conguration options
• EVENTS > Smart Analitics tab (Fig.12)
Majority of settings in this tab should be left with default values to ensure optimum operation of the device.

- Enable (Open / Close) – activation or deactivation of the device (for „Close” - the device will not detect face, measure temperature
etc.
- MaskCkEnable (Open / Close) – switching on/off the mask detection
- TempCkEnable (Open / Close) – switching on/off temperature detection
- StrangerTempCkEnable (Open / Close) – switching on / off of temperature detection of unknown person (not entered into the sys-
tem)
- WarnTemp – temperature set for warning of increased body temperature for entering people
• EVENTS > List tab – (Fig.13)
- Import List – tab allowing adding images of people, which should be recognized by the device
A picture of a given person can be added in two ways:
- photo le upload - function Picture Stype > Impor t – enter access path for the photo (maximum size 9 60 x 960 px) and click „upload”
button. Give a name of the photo after upload (Picture Naming) - any name, e.g. name, surname and number (Picture Code) and click
Add Whitelist to add it to the list of people authorized to enter.
- photo recording by the device - function Picture Stype > Snap - enter the name rst (Picture Naming) and number (Picture Code)
under which the picture will be recorded. Then place a person whose image should be recorded in front of the device and press „Add
Whitelist” button. Now, the device will take a photo of recorded person and add its image to the list of persons authorized to enter.
Before registering a new person, make sure that the face recognition function is active. Go to EVENTS > Smart Analitics
tab and set the „FaceMatching” option to OPEN.
- Preview List – tab allowing you to preview a whitelist of people saved in the system who are allowed to enter the facility and
remove them from the list (Fig.14)
Fig.13
Fig.14

- Identify Record – tab allowing previewing list of people who have attempted to enter the facility within a specied time (date
and time range). It shows photo of person, information whether the person is known or unknown, whether the mask was worn and
what her/his temperature was (Fig.15).
• EVENTS>Peripheral tab – (Fig.16)
- MatchSuccess – face recognition activation or deactivation(active option prevents access of person whose face has not
been recognized)
- TemperatureNormal – activation or deactivation of temperature measurement(active option prevents access of person
with increase temperature)
- WearMask – activation or deactivation of mask wearing necessity (active option prevents access of person without a mask)
- VoicePrompts – (open / close) – voice messages switching on / off
- MaskVoice – (open / close) – activation / deaction of voice message about the need to wear a mask
- UnlockControl – (open / close) – switching of relay output between the modes: normal open and normal close
- UnlockOutputTime – period of relay activation after opening
Fig.15
Fig.16

WARRANTY CARD
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
1. ZAMEL provides a two-year warranty for its products.
2. The ZAMEL warranty does not cover:
a) mechanical defects resulting from transport, loading / unloading or other circumstances,
b) defects resulting from incorrect installation or operation of ZAMEL products,
c) defects resulting from any changes made by CUSTOMERS or third parties, to products sold or equipment necessary for the cor-
rect operation of products sold,
d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable.
3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering a defect.
4. ZAMEL will review complaints in accordance with existing regulations.
5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.
6. Guarantee does not exclude, does not limit, nor does it suspend the rights of the PURCHASER resulting from the discrepancy
between the goods and the contract.
• Video Settings > Audio Parameter tab – (Fig.17)
- Output Volume – adjustment of voice messages volume
Fig.17