manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. ZANE ARTS
  6. •
  7. Tools
  8. •
  9. ZANE ARTS TO-401 User manual

ZANE ARTS TO-401 User manual

TO-401 / GRART HAMMER
MANUAL - Ver 1.01
EN
■ PARTS NAME
Please be sure to read the manual before using this product.
If you have any questions or if there is a problem with the
product, please contact the store where you purchased the
product or us directly.
2
Claw
Handle
Support End
Head
Face
Please do not use excessive force on the claw.
3
Using excessive force may
deform or break the claw.
When removing pegs, insert the claw into the peg and pull
vertically. Twisting or leveraging the claw may deform or break
the claw.
NG
NG
■ABOUT THIS PRODUCT
Please take some time to understand the characteristics of
this product before using it.
■ Handling Precautions
Be sure to read and understand the following contents
before use to prevent harm to the user and others, and
damage to property.
●To avoid injury, be sure that your surroundings are clear of
people before using this product.
●Please be careful not to hit your hands, fingers, or feet when
using.
●Because this product becomes slippery when wet, as with
sweaty hands or in rain, please be extra careful not to let it fly
out of your hands.
●Please drive pegs only with the hammer face. Misuse will
cause damage.
●Should any parts become loose, please refrain from use.
●Please do not let children use this product.
4
INDICATES CONTENT THAT MAY RESULT
IN DEATH OR SERIOUS INJURY.
!
!
DANGER
●Please refrain from forcibly driving pegs. Forcibly driving
pegs into hard or frozen ground may strain the metal causing
the head to crack or the handle to bend.
●The claw is sharp. Please be careful not to hit your face or
body with the claw.
5
6
●When removing pegs, insert the claw into the peg and pull
vertically. Twisting or leveraging the claw may deform or
break the claw.
●The head will gradually scratch and dent with use. Burrs may
form around the edges and fall off. Periodically check the
head for burrs. File burrs down with a metal file. Please be
careful not to hurt yourself on burrs.
●After each use, wipe off any moisture and dry thoroughly
before storing. If stored wet or uncleaned the product may
corrode.
●Please keep out of reach of infants and children.
●Do not modify this product, it may impair its performance.
INDICATES CONTENT THAT MAY CAUSE
INJURIES OR PROPERTY DAMAGE.
WARNING
!
■ USE
7
In order to drive pegs more easily, make the most of centrifugal force
by placing your little finger up against the support end while swinging.
Little finger up
against the support end.
8
■WARRANTY AND REPAIR
If you find any defects in the product, please contact the store where you
purchased it or us directly. We will replace or repair any item found to have
a manufacturing defect free of charge. We will repair products with damage
caused by wear and aging at a reasonable price. Please note that it may be
difficult to obtain some materials due to the discontinuation of products and
parts, and repairs may not be possible based on the condition of the
product.
※When sending a product for repair, please remove dirt and moisture from
the product before sending it. Moisture and dirt may interfere with repairs.
Items that are not clean and dry upon arrival for repair will incur additional
charges at their own expense for cleaning. Thank you for your
understanding.
Zain Arts Co., Ltd.
7190-2 Shimauchi, Matsumoto, Nagano 390-0851
Phone: 0263-87-2955 FAX: 0263-87-2966
[email protected]

Popular Tools manuals by other brands

Master cool 43306 manual

Master cool

Master cool 43306 manual

Lumberjack LS370 Original instructions

Lumberjack

Lumberjack LS370 Original instructions

Hellermann Tyton AT2000 CPK bench mount kit operating instructions

Hellermann Tyton

Hellermann Tyton AT2000 CPK bench mount kit operating instructions

Show Tec Multigrip Clamp manual

Show Tec

Show Tec Multigrip Clamp manual

Power Tec 91781 quick start guide

Power Tec

Power Tec 91781 quick start guide

Vogt WorkTec VH10 Translation of the original operating manual

Vogt

Vogt WorkTec VH10 Translation of the original operating manual

Meridian HARVEST T1062 Operator's manual

Meridian

Meridian HARVEST T1062 Operator's manual

WilTec 61117 Operation manual

WilTec

WilTec 61117 Operation manual

TOOLCRAFT 2483185 operating instructions

TOOLCRAFT

TOOLCRAFT 2483185 operating instructions

Ingersoll-Rand PowerForce PF600 instructions

Ingersoll-Rand

Ingersoll-Rand PowerForce PF600 instructions

Reka TR 500 operating instructions

Reka

Reka TR 500 operating instructions

VEVOR YL-15T manual

VEVOR

VEVOR YL-15T manual

Josef Kihlberg c.561PN operating instructions

Josef Kihlberg

Josef Kihlberg c.561PN operating instructions

Pattfield Ergo Tools PE-500PF Original instructions

Pattfield Ergo Tools

Pattfield Ergo Tools PE-500PF Original instructions

THORLABS RollerBlock RB13 Series user guide

THORLABS

THORLABS RollerBlock RB13 Series user guide

Craftsman 922217 owner's manual

Craftsman

Craftsman 922217 owner's manual

FarmTek 12855 quick start guide

FarmTek

FarmTek 12855 quick start guide

CleanCraft WSAR 20 operating instructions

CleanCraft

CleanCraft WSAR 20 operating instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.