Zanussi 200336 User manual

ZANUSSI
P R O F E S S I O N A L
GAS FRYERS - 15 LT
N 900
Model 200336
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1
BASKET FOR 14/15 LT FRYERS 1 2
INCLUDED ACCESSORIES
Net weight - kg. 50 86
gas 14 28
Power - kW
Maximum Well Capacity -lt 13, 15 13, 15
Temperature limiter l l
Thermostatic l l
height 505 505
depth 380 380
width 240 240
Usable well dimensions - mm
N° of wells 1 2
height adjustment 50 50
height 850 850
depth 900 900
width 400 800
External dimensions - mm
Power supply Gas Gas
NFRG400
200336
NFRG800
200337
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models
for the professional caterer designed
to guarantee the highest level of
performance, reliability, energy
saving, safety standards and
ergonomic operation. These
concepts are reflected in the total
modularity of the range that ensures
innumerable configurations, either
free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of
the professional caterer.
The models detailed on this sheet
are 15 litres fryers in gas version.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Stainless steel burners with
optimized combustion, flame failure
device and protected pilot light.
� The "V" shaped wells have the
heating elements attached to the
outside allowing an increased life of
the oil, greater productivity and an
easier cleaning.
� Working temperature from 120ºC
to 190ºC.
� Appliances are supplied for use
with natural gas, with LPG
conversion jets supplied as standard.
� All models have right-angled side
edges to allow flush-fitting joins
between units, eliminating gaps and
possible dirt traps.
� Additonal overheat safety
thermostat.
� Worktop in 20/10 stainless steel.
Front and side panels in stainless
steel with Scotch Brite finish.
� Oil drainage via a tap into a
drainage container positioned under
the well thus simplifying the
consumed oil management and
guaranteeing the operator safety.
� Feet in stainless steel 50 mm
adjustables in height.
� The special design of the control
knob system guarantees against
water infiltration
� Door with handles in stainless
steel.
� All models can be installed on
cantilever system.
� Main connections can be via the
base of the unit. All models provided
with service duct to facilitate
installation.

BACM1 2009-07-02 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
UNCLOGGING ROD F.15LT FRYER DRAIN.PIPE 921695 921695
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137
SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138
SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165
SEDIMENT TRAY FOR 15L FRYER 206235 206235
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 206194 206194
REAR FLUE UPSTAND FOR SMALL CHIMNEY 206159
REAR FLUE UPSTAND FOR LARGE CHIMNEY 206160
PRESSURE REGULATOR FOR GAS UNITS 927225 927225
PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234
OIL FILTER FOR FRYERS 206143 206143
MATCHING RING FOR FLUE CONDENSER 150DIAM 206133
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 206195 206195
LARGE HANDRAIL(PORTIONING SHELF)800 MM 206186 206186
LARGE HANDRAIL(PORTIONING SHELF)400 MM 206185 206185
JUNCTION SEALING KIT 206086 206086
FRONTAL KICKING STRIP 800 MM 206176 206176
FRONTAL KICKING STRIP 400 MM 206175 206175
FRONTAL KICKING STRIP 200 MM 206174 206174
FRONTAL KICKING STRIP 1600 MM 206179 206179
FRONTAL KICKING STRIP 1200 MM 206178 206178
FRONTAL KICKING STRIP 1000 MM 206177 206177
FRONTAL HANDRAIL 800 MM 206167 206167
FRONTAL HANDRAIL 400 MM 206166 206166
FRONTAL HANDRAIL 1600 MM 206192 206192
FRONTAL HANDRAIL 1200 MM 206191 206191
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150
FLUE CONDENSER FOR 1/2 MOD. DIAM.120MM 206155
FLUE CONDENSER FOR 1 MODULE DIAM.150MM 206156
EXTENSION FOR OIL DRAINAGE 206209 206209
DRAUGHT DIVERTER WITH 150 MM DIAMETER 206132
DRAUGHT DIVERTER WITH 120 MM DIAMETER 206126
DEFLECTOR FOR FLOURED PRODUCTS-15L FRYER 921696 921696
CHIMNEY UPSTAND 800MM 206304
CHIMNEY UPSTAND 400MM 206303
BASKET FOR 14/15 LT FRYERS 921691 921691
4 WHEELS (2 WITH BRAKE) 206188
4 FEET FOR CONCRETE INSTALLATION 206210 206210
2 SIDE KICKING STRIPS F.CONCRETE INSTAL. 206157 206157
2 SIDE KICKING STRIPS 206180 206180
2 SIDE COVERING PANELS H=700 D=900 206134 206134
2 SIDE COVERING PANELS FOR TOP-D=900MM 206278 206278
2 PANELS FOR SERVICE DUCT (SINGLE INST.) 206181 206181
2 PANELS FOR SERVICE DUCT (BACK TO BACK) 206202 206202
2 1/2 BASKETS FOR 14/15 LT FRYERS 921692 921692
NFRG400
200336
NFRG800
200337
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
G - Gas connection 1/2" 1/2"
NFRG400
200336
NFRG800
200337
LEGEND
200336, 200337