Zanussi Zanussi Professional NFRE420 User manual

ZANUSSI
P R O F E S S I O N A L
ELECTRIC FRYERS - 23 LT
N 900
Model 200342
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 1 1
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 1
2 HALF SIZE BASKETS FOR HD FRYERS 1 2
INCLUDED ACCESSORIES
Supply voltage 400 V, 3N, 50/60 400 V, 3N, 50/60
Net weight - kg. 57 115
installed-electric 18 36
Power - kW
Maximum Well Capacity -lt 21, 23 21, 23
Temperature limiter l l
Thermostatic l l
height 575 575
depth 400 400
width 340 340
Usable well dimensions - mm
N° of wells 1 2
height adjustment 50 50
height 850 850
depth 900 900
External dimensions - mm
depth 35 7/16" 35 7/16"
External dimensions - inch
width 400 800
External dimensions - mm
Power supply Electric Electric
NFRE420
200342
NFRE820
200343
CHARACTERISTICS MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models for the
professional caterer designed to guarantee
the highest level of performance, reliability,
energy saving, safety standards and
ergonomic operation. These concepts are
reflected in the total modularity of the range
that ensures innumerable configurations,
either free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of the
professional caterer.
The models detailed on this sheet are 23
litres fryers in electric version.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
� Infrared high efficiency heating elements.
� Working temperature from 105ºC to 185ºC.
� The "V" shaped wells, separately
controlled, have the heating elements
attached to the outside allowing an increased
life of the oil, greater productivity and an
easier cleaning
� All models have right-angled side edges to
allow flush-fitting joins between units,
eliminating gaps and possible dirt traps.
� Additonal overheat safety thermostat.
� Worktop in 20/10 stainless steel. Front
and side panels in stainless steel with Scotch
Brite finish.
� Oil drainage via a tap into a drainage
container positioned under the well thus
simplifying the consumed oil management
and guaranteeing the operator safety.
� The units are supplied, as standard, with 2
half baskets for each well.
� Feet in stainless steel 50 mm adjustables
in height. The special design of the control
knob system guarantees against water
infiltration.
� Door with handles in stainless steel.
� Main connections can be via the base of
the unit.
� All models provided with service duct to
facilitate installation.
� All models can be installed on cantilever
system.
� IPX5 water protection.

BACN3 2009-07-02 The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
UNCLOGGING ROD F.23LT FRYER DRAIN.PIPE 927227 927227
SUPPORT FOR "BRIDGE" SYSTEM 800 MM 206137 206137
SUPPORT FOR "BRIDGE" SYSTEM 400 MM 206154 206154
SUPPORT FOR "BRIDGE" SYSTEM 1600 MM 206141 206141
SUPPORT FOR "BRIDGE" SYSTEM 1400 MM 206140 206140
SUPPORT FOR "BRIDGE" SYSTEM 1200 MM 206139 206139
SUPPORT FOR "BRIDGE" SYSTEM 1000 MM 206138 206138
SIDE HANDRAIL-RIGHT/LEFT HAND 206165 206165
SEDIMENT TRAY FOR 23 LT FRYER 206173 206173
RIGHT SIDE DOOR FOR OPEN BASE CUPBOARD 206194 206194
REAR FLUE UPSTAND FOR SMALL CHIMNEY 206159
REAR FLUE UPSTAND FOR LARGE CHIMNEY 206160
PAIR OF COVERING STRIPS FOR END ELEMENTS 206234 206234
OIL FILTER FOR FRYERS 206143 206143
MATCHING RING FOR FLUE CONDENSER 150DIAM 206133
LEFT SIDE DOOR FOR OPEN BASE CUPBOARD 206195 206195
LARGE HANDRAIL(PORTIONING SHELF)800 MM 206186 206186
LARGE HANDRAIL(PORTIONING SHELF)400 MM 206185 206185
JUNCTION SEALING KIT 206086 206086
HYGIENIC LID FOR 23 LT FRYERS 206201 206201
FRONTAL KICKING STRIP FOR 23 LT FRYER 206203 206203
FRONTAL KICKING STRIP 800 MM 206176 206176
FRONTAL KICKING STRIP 400 MM 206175 206175
FRONTAL KICKING STRIP 200 MM 206174 206174
FRONTAL KICKING STRIP 1600 MM 206179 206179
FRONTAL KICKING STRIP 1200 MM 206178 206178
FRONTAL KICKING STRIP 1000 MM 206177 206177
FRONTAL HANDRAIL 800 MM 206167 206167
FRONTAL HANDRAIL 400 MM 206166 206166
FRONTAL HANDRAIL 1600 MM 206192 206192
FRONTAL HANDRAIL 1200 MM 206191 206191
FRONT.KICK.STRIP F.CONCRETE INST.800 MM 206148 206148
FRONT.KICK.STRIP F.CONCRETE INST.400 MM 206147 206147
FRONT.KICK.STRIP F.CONCRETE INST.200 MM 206146 206146
FRONT.KICK.STRIP F.CONCRETE INST.1600 MM 206152 206152
FRONT.KICK.STRIP F.CONCRETE INST.1200 MM 206151 206151
FRONT.KICK.STRIP F.CONCRETE INST.1000 MM 206150 206150
FLUE CONDENSER FOR 1/2 MOD. DIAM.120MM 206155
FLUE CONDENSER FOR 1 MODULE DIAM.150MM 206156
EXTENSION FOR OIL DRAINAGE 206209 206209
DRAUGHT DIVERTER WITH 150 MM DIAMETER 206132
DRAUGHT DIVERTER WITH 120 MM DIAMETER 206126
DEFLECTOR FOR FLOURED PRODUCTS-23L FRYER 960645 960645
CHIMNEY UPSTAND 800MM 206304
CHIMNEY UPSTAND 400MM 206303
4 WHEELS (2 WITH BRAKE) 206188
4 FEET FOR CONCRETE INSTALLATION 206210 206210
2 SIDE KICKING STRIPS F.CONCRETE INSTAL. 206157 206157
2 SIDE KICKING STRIPS 206180 206180
2 SIDE COVERING PANELS H=700 D=900 206134 206134
2 SIDE COVERING PANELS FOR TOP-D=900MM 206278 206278
2 HALF SIZE BASKETS FOR HD FRYERS 927223 927223
1 FULL SIZE BASKET FOR HD 900 FRYERS 927226 927226
NFRE420
200342
NFRE820
200343
ACCESSORIES MODELS
OPTIONAL ACCESSORIES
EI - Electrical connection 400 V, 3N, 50/60 400 V, 3N, 50/60
NFRE420
200342
NFRE820
200343
LEGEND
200342, 200343