Zavio D5113 User manual

D5113
86085G8000020

Zavio D5113 Quick Installation Guide
Please follow the installation steps below to set up your F7210 Box IP Camera.
Check the package contents against the list below. See P.1
Physical overview. See P.1
LED Indicator Definition. See P.2
DI/ DO Diagram. See P.2
I/O Terminal Pin Definition. See P.3
Install the hardware and connect all cables. See P.4
Microsoft OS: Use the software CD to install Intelligent IP Installer. See P.7
Access the IP Camera using Intelligent IP Installer. See P.7
Mac OS using Safari Browser. See P.9
Change light environment setting. See P.9
Change the Web Interface into your preferred language. See P.10
Application of IP Camera. See P.10
For more information, please check the User Manual available in the Software CD or you can download the latest
software from http://www.zavio.com
Package Contents
Physical overview
1
Camera D5113 IP Camera
Quick Installation Guide Brief product information and quick installation
Software CD IP Surveillance Software
Intelligent IP Installer
User Manual
Language Packs
Accessory Three plastic anchors and screws
Alignment sticker
4pin I/O terminal block

LED Indicator Definition
DI/DO Diagram
12V/1A
2

I/O Terminal Pin Definition
PIN Definition Description Max. V/A
1 + 12V DC 12V DC
1.2W
2 Ground -
3 Digital Input 1 Connected to GND to activate, or leave floating (or unconnected)
to deactivate. 30V DC
4 Digital Output 1
Uses an NPN transistor with the emitter connected to the GND
pin. If used with an external relay, a diode must be connected in
parallel with the load for protection against voltage transients.
100 mA
24V
3

c1. Without Power over Ethernet (PoE) connection
b. Connect all cables
1. Connect the power adaptor to the IP Camera.
2. Using astandard RJ-45 network cable, connect the IP Camera
to anormal Hub /Switch /Router.
c2. Power over Ethernet (PoE)
1. Using astandard RJ-45 network cable, connect the IP Camera
to aPoE-enabled Hub /Switch /Router.
4

5

6

Microsoft OS:Use the software CD to install Intelligent IPInstaller
Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow these steps to
install the firmware.
Select “Intelligent IP Installer” and follow the installation process to complete the installation.
Access the IP Camera using Intelligent IPInstaller
1. Please check two settings before using Intelligent IP Installer .
a. Browser’s Internet Properties → Security
→ Default Level
2. Click the Intelligent IP Installer Icon on your desktop. The main page will show up listing all active
camera and video server devices. Select the relevant IP camera from the list and click Link to IE.
7
b. Brower’s Internet Properties →Privacy
→Uncheck Pop-up Blocker

3. Enter your Username and Password
to login to the IP Camera.
(Default is admin / admin)
4. When accessing the IP Camera for the first time, ayellow information bar appears below the address bar:
This website wants to install the following add-on: ‘AxvideoView.cab from ‘Zavio Inc’.
5. Click the information bar, and select Install ActiveX control .
6. Click Install .
7. Live video displays in the centre of your web browser.
8

Mac OS using Safari Browser
1. Select Safari icon
2. Click Bonjour function and select the camera
you wish to access.
3. Enter name and password to login to the IP
4. The monitor image will be displayed in your browser.
camera. ( Default is admin / admin )
Lighting environment setting
The default setting of lighting environment is Auto . However, you may also select 50 or 60 Hz upon the lighting
environment of your country.
Go to “ Setting > Live View > Camera Setting > Image Setting ” , select the environment setting you wish.
9