Zebronics ZEB Pixaplay 13 User manual

ZEB
Play
Pixa
13
LED Projector
www.zebronics.com
User Manual

Dear Customer,
Thank you for purchasing the ZEB-Pixaplay
13 LED Projector. Please read the user manual
carefully before usage & save it for future
reference.
Note :
Ÿ To provide a stable power supply, kindly use the
cable provided with the product and connect to a
DC 19V 2.5A power source.
Ÿ Avoid the self-disassembly of the product as it
results in the failure of Warranty.
Ÿ Avoid looking directly at the projector lens while
it is active.
Ÿ Make sure that the projector's air vents are not
blocked while in use. The device must be kept in a
wel l i nsul ate d s urroun din g f or proper
functioning.
Ÿ It is recommended to power OFF the projector
after a continuous usage of 6 hours.
Ÿ Place the projector away from water or other
liquids. Avoid water accumulation and ensure
good ventilation.
Ÿ In case of enquiry regarding the projector, email
us at [e-mail] or contact us at 044
4000 0004.

Features :
Ÿ Home Theater Projectors for Movies, TV &
Gaming etc.
Ÿ Projector comes with VGA, AV IN, AUX OUT,
USB, HDMI
Ÿ Built in Speaker
Ÿ Remote Control
Specification:
Screen size : 89-508cm
Native Resolution : 1024 x 600P
Max. Supported
Resolution : 1920 x 1080P (Max)
Display Technology : LED
Lifespan : 30,000H
Brightness : 2000 lumens
Contrast ratio : 1000:1
Projection Distance : 1.1m - 6m
Port Interface : AV IN, AUX OUT, USB,
HDMI
Video file format : AVI, MP4, MPG, MPEG1,
MPEG2, MKV, WMV,
VOB, MOV, FLV, H.264,
HEVC, DIVX
Input Voltage : DC 19V 2.5A
Product Dimension
(W x D x H) : 18 x 13 x 6.5 cm
Net. weight : 602g

Package Contents :
Projector : 1 U
Remote Control : 1 U
Power Adapter : 1 U
AV cable : 1 U
HDMI Cable : 1 U
QR Code Guide : 1 U
Cotton Swab set : 1 U

Product Description

*NOTE :
1. To avoid power shortage, please do not mixed use the old
and new battery.
2. To avoid battery leakage corrosion, if do not use remote
control for a long time, please take the battery out.
SignalSource/
InputMode

Projector Interface

Setting Up the Projector
1. Connect the power adapter to the projector
and turn it ON, You'll be indicated with the Blue
color LED near power button.
2. Before turning ON, make sure to place it in a
flat surface for a proper projection then Press
the power button / turn it on by using the
remote.
3. Align the projector as shown in the image
below to ensure proper projection.
Focus Adjustment
Once the projector turns ON, wait till it gets
loaded. Only after a proper boot-up you'll be
able to adjust the focus lens manually as
shown in the image above.
Incorrect installation
The images right-left small
Correct installation
The images is rectangular
Incorrect installation
The images left-right small

USB Connections
Connect the USB Drive with the content to
the projector. Select “Media” the content in the
USB drive should be present inside the media
(Images/Videos/Music).

HDMI Interface
Once the HDMI is connected to the
projector, you will need to select the specific
signal source as the input. After connected the
content played from the source will be
streamed on the projector.

AV Interface
Once the AV is connected to the projector,
you will need to select the specific signal source
as the input. After connected the content
played from the source will be streamed on the
projector.

Audio Interface
Once the Audio Device (Headphone /
Speakers) is connected to the projector, it will
automatically detect as theoutput device &
start streaming from it.
Projector Distance & Size
*Note:
Because the optical device has about 3% error, the above
data is for reference only, please install the projector
according to the actual measurement.
ISO 9001:2015 Certified Company
www.zebronics.com