Zebronics ZEB-PixaPlay 26 User manual

www.zebronics.com
User Manual
Smart LED Projector
ZEB

Dear Customer,
Thank you for purchasing the Zeb-Pixaplay 26
Smart LED Projector. Please read the user
manual carefully before usage and save it for
future reference.
Note :
* To provide a stable power supply, kindly use the
cable provided with the product and connect to a
AC 100-240V, 50/60Hz power source.
* Avoid the self-disassembly of the product as it
results in the voiding of the product’s warranty.
* Avoid looking directly at the projector lens while
it is active.
* Please ensure that the air vents of the projector
are not blocked while it is in use. It is essential to
keep the device in a well-ventilated environment
to ensure proper functioning.
* It is recommended to power OFF the projector
after a continuous usage of maximum 6 hours.
* Place the projector away from water or other
liquids. Avoid water accumulation and ensure
good ventilation.
* In case of enquiry regarding the projector, email
us at [email protected] or contact us at 044
4000 0004.

Features :
Ÿ Multi Connectivity (BT v5.0 | HDMI (ARC) |
Dual USB: 1 x USB | 1 x USB (power)| AUX OUT)
Ÿ Home Theater Projectors for Movies, TV &
Gaming etc..
Ÿ Powerful Speaker With Passive Radiator
Ÿ Wide Compatibility
Ÿ Ceiling Mountable
Ÿ Remote Control (BT + IR)
Ÿ Electronics Focus (via remote)
Ÿ Auto Focus Technology
Ÿ Auto Keystone Adaptation
Ÿ Miracast
Ÿ Dual band Connectivity (2.4GHz & 5GHz)
Ÿ FHD 1080p (Native)
Ÿ 30,000h lifelong LED lamp
Ÿ APP Support
Ÿ Quad Core Processor
Ÿ Netflix | Amazon Prime Video | YouTube
Specification:
Screen size : 111 - 508cm
Native Resolution : 1920 x 1080 FHD
Max. Supported
Resolution : 1080p (max)
RAM : 1 GB
Core Processor : Quad Core Processor
Storage (ROM) : 8 GB
WI-Fi Connectivity : Dual band Connectivity
(2.4GHz & 5GHz)
Bluetooth Version : v5.0

Display Technology : LED
Lifespan : 30,000h
Brightness : 5000 lumens
Contrast ratio : 1000:1
Projection Distance : 1.3m - 5.7 m
Port Interface : HDMI (ARC), Dual USB: 1
x USB | 1 x USB (power), AUX OUT
Video file format : AVI, MP4, MPG, MPEG1,
MPEG2, MKV, WMV, MOV, FLV, H.264
Input Voltage : AC 100-240V, 50/60Hz
Product Dimension
(W x D x H) : 22.4 x 22 x 13.5 cm
Net. weight : 2 Kg
Package Contents :
Projector : 1 U
Remote Control : 1 U
Power Cord : 1 U
Cotton Swab Pack : 1 U
HDMI Cable : 1 U
QR Code Guide : 1 U

Product description:
Remote Control
NOTE :
1. To avoid power shortage, do not mix and use the old and
new batteries
2. To avoid battery leakage corrosion, if the remote
controller is not used for a long time, please take the battery
out
USB SV OUT HDMI
IR
AUX OUT
USB Interface
5V Out HDMI (ARC)
Power Input
VOL
Power
Input
Focus
UP
Right
Menu
Home
Vol+
Netflix
Youtupe
Prime Video
Mute
Focus
Ok
Left
Down
Return
Vol-

Product Interface
USB SV OUT HDMI
1 2 3 4

Setting Up the Projector
1. Before turning it on, place the projector on a
flat surface to ensure proper projection
2. Connect the power cord to the projector and
plug it into a socket to supply power. Turn the
projector on.
3. Align the projector as indicated in the image
below to ensure the proper projection.
Focus and Keystone Adjustment:
Note: There is no manual focus, it has only electronics
focus. Do not rotate the lens or it will get damaged.
Once the projector turns ON, wait till it gets
loaded. Only after boot-up you’ll be able to
adjust the focus using the focus control
buttons of the remote as mentioned in the
image.
Incorrect installation
The images right-left small
Correct installation
The images is rectangular
Incorrect installation
The images left-right small
Power
Input
Focus
Mute
Focus

Electronics Focus
Press the “ ” and “ ” buttons on remote control to
adjust the clarity
Auto Focus
Manual Keystone

Bluetooth remote pairing
Select Remote Control at the top of the
home page and the pairing interface will
appear

Settings
Open the homepage and select Settings.
This setting houses the following sub-menus:
Network & Internet, Bluetooth, Input / HDMI,
Picture, Display & Sound, and System.
Projection:
The projection adjustments like Keystone
adjustment, zoom out can be done using the
projection tabs in the settings.

Image Zoom: with a click of remote, you can
scale down the image to perfectly fit within the
screen frame.
Digital 4D keystone: While most of the
projector comes with only manual vertical
trapezoidal correction, resulting in blurred
corners, ZEB-Pixaplay 26 has 4D keystone
corrections, giving you sharp and clear
corners.
Home Screen:
* Once the projector is turned on you’ll be
directed to the home-screen.
* The Home screen displays a list of installed
apps, Settings menu, Resource manager and
remote control.

HDMI Interface:
Onc e the HDMI inte rface is
connected to the projector, you will need to
select the specific signal source as the input.
After connecting the content played on the
source will be streamed on the projector.
USB Connections

Projector distance & size
Note:
Due to optical device error of about 3%, the above data is
for reference only, Please use actual measurement when
installing the device.
ISO 9001:2015 Certified Company
www.zebronics.com