Zebronics Zeb-Juke Bar 9530WS User manual

Juke Bar
ZEB
Pro Dolby 5.1
9530WS
sound bar
www.zebronics.com
User Manual

Important Safety Instruction
Thank you for purchasing the ZEB-JUKE
BAR 9350WS DOLBY 5.1 Soundbar. Please
read this user manual carefully and keep for
future reference.
Warning
Caution:
Ÿ To reduce the risk of electric shock, do not
dismantle the product and do not expose the
device to rain or moisture. No user-serviceable
parts inside.
Ÿ Refer servicing to qualified personnel only.

The lightning flash within an
e q u i l a t e r a l t r i a n g l e i s
intended to alert you to the
presence of uninsulated
dangerous voltage within the
product’s enclosure that may
be of sufficient magnitude to
constitute an electric shock to
a person or persons.
Important! This symbol alerts
you to read and observe
im portant war n ings and
instructions on the unit or in
this manual.
Notice:
This device is not intended for use by
persons (including children) with reduced
physical sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the device by a person
responsible for their safety.
Children should be supervised to ensure
that they do not play with the device.
1. To prevent possible hearing
damage, do not listen at high

volume levels for long time
periods or a sudden high volume level.
2. Never use the device unsupervised! Switch
off the device whenever you are not using it,
even if not using it only for a short while.
3. The device is not intended to be operated by
means of an external timer or separate remote
control system.
4. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid
a hazard.
5. Before operating this system, check the
voltage of this system to see if it is identical to
the voltage of your local power supply.
6. The unit should not be impeded by covering
the ventilation opening with items such as
newspaper, table-cloths, curtains etc. Make
sure that there are at least 20 cm of space
above and at least 5 cm of space on each side of
the unit.
7. The device must not be exposed to dripping
or splashing liquid, no objects filled with liquids
such as vases, should be placed on the device.
8. To prevent fire or shock hazard, do not
expose this equipment to direct heat, rain,
moisture or dust.
9. Do not position this unit near any water
sources e.g. taps, bathtubs, washing machines

or swimming pools. Ensure that you place the
unit on a dry, stable surface.
10. Do not place this unit close to a strong
magnetic field.
11. Do not place the unit on a amplifier or
receiver.
12. Do not place this unit in a damp area as the
moisture will affect the life of electric
components.
13. Do not attempt to clean the unit with
chemical solvents as this might damage the
finish. Wipe with a clean, dry or slightly damp
cloth.
14. When removing the power plug from the
power socket, always pull directly on the plug,
never pull on the cord.
15. Depending on the electromagnetic waves
used by a television broadcast, if a TV is turned
on near this unit while it is also on, lines might
appear on the LED TV. Neither this unit nor the
TV is malfunctioning. If you see such lines, keep
this unit well away from the TV set.
16. The mains plug is used to disconnect the
device, the disconnected device should remain
readily operable.

Important Safety Instructions
1. Read these instructions. Keep these
instructions. Follow all instructions. Heed all
warnings.
2. Do not use this device near water.
3. Clean only with dry cloth.
4. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
5. Do not install near any heat sources such as
radiators, heaters, stoves, or other device
(including amplifiers) that produce heat.
6. Protect the power cord from being walked
on o r p in ch ed p ar ti cu la r l y at p lu gs ,
convenience receptacles or at the point where
they exit from the device.
7. Only use attachments/accessories specified
by the manufacturer.
8. Unplug this device during lightning storms or
when unused for long periods of time.
9. Refer all servicing to qualified service
personal. Servicing is required when the device
has been damage in any way, for example,
when the power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the device, the device has been
exposed to rain or moisture, does not operate
normally, or has been dropped.

10. The AC plug is used to disconnect the
device, the disconnected device should remain
readily operable. In order to disconnect the
device from the AC power completely, the AC
plug must be removed from the AC power
socket completely.
Preparation for Use
Unpacking and Set Up
Ÿ Remove the Sound bar from the carton
and remove all packing material from the
Sound bar. Save the packing material, if
possible, in case the Sound bar ever needs to
be serviced or transported.
Ÿ The original carton and packing material is
the only safe way to pack your Sound bar to
protect it from damage in transit.
Ÿ Remove any descriptive labels or stickers
on the front or top of the cabinet. Do not
remove any labels or stickers from the back or
bottom of the cabinet.
Ÿ Place your Sound bar on a level surface
such as a table, desk or shelf, convenient to an
AC power socket, out of direct sunlight, and
away from sources of excess heat, dirt, dust,
moisture, humidity, or vibration.
Ÿ Unwind the Line cord connecting the AC
adapter and extend it to its full length.

Protect Your Furniture
This model is equipped with non-skid
rubber 'feet' to prevent the product from
moving when you operate the controls. These
'feet' are made from non-migrating rubber
material specially formulated to avoid leaving
any marks or stains on your furniture. However
c e r ta in ty p e s o f o il b a se d f ur n i t ur e
polishes, wood preservatives, or cleaning
sprays may cause the rubber 'feet' to soften,
and leave marks or a rubber residue on the
furniture. To prevent any damage to your
furniture we strongly recommend that you
purchase small self-adhesive felt pads,
available at hardware stores and home
improvement center everywhere, and apply
these pads to the bottom of the rubber 'feet'
before you place the unit.
Important Notes
Ÿ Safety and operating instruction manual
should be retained for future reference.
Ÿ The device should not be exposed to
dripping, splashing or placed in a humid
atmosphere such as a bathroom.
Ÿ Do not install the product in the following
areas:
Ÿ Places exposed to direct sunlight or
close to radiators.

Ÿ On top of other stereo equipment that
radiate too much heat -Blocking
ventilation or in a dusty area.
Ÿ Areas where there is constant vibration.
Ÿ Humid or moist places.
Ÿ Do not place near candles or other
flames.
Ÿ Operate the product only as instructed in
this manual.
Ÿ Before turning on the power for the first
time, make sure the sound bar is plugged to
power socket.
Ÿ For safety reasons, do not remove any
covers or attempt to gain access to the inside of
the product. Refer any servicing to qualified
personnel.
Ÿ Do not attempt to remove any screws, or
open the casing of the unit; there are no user
serviceable parts inside. Refer all servicing to
qualified service personnel.
Power Source:
This soundbar is designed to operate in AC
220-240V 50/60Hz.

Product Representation
Sound Bar
1. LED DISPLAY
2. AC IN
3. SR OUT
4. SL OUT
5. SW OUT
6. USB
7. OPTICAL
8. LINE IN(AUX)
9. FOR UPDATE
10. HDMI(ARC)
11. POWER/STAND BY
12. INPUT
13. VOL -
14. VOL +

Remote Control

1. : Standby mode for power on/off.
2. PAIR : Connect or disconnect to the pairing device.
(Press the button more than 2 seconds).
3. RESET : Reset all CH volume levels to default of
factory setting and switch EQ to Music mode when
press and hold button more than 2 seconds.
4. TR- : Treble volume down.
5. Volume+ : Master volume up
6. 9 Pre button : Previous program Only work under
USB & BT Mode).
7. Volume- : Master volume down.
8. SW : Subwoofer Channel volume down.
9. MUSIC : Select the Music EQ effect.
10. NEWS : Select the News EQ effect.
11.CEN- : Center Channel volume down.
12. SURR- : Surround Channel volume down.
13. MUTE : Mute mode.
14. INPUT : Input mode (AUX/USB/ARC/OPT/BT).
15. DISPLAY : LED display on/off, Only work under
power on.
16. TR+ : Treble volume up.
17. : Next button : Next program. (Only work under
USB and BT mode).
18. SW+ : Subwoofer Channel volume up.
19. MOVIE : Select the Movie EQ effect.
20. SPORT : Select the Sport EQ effect.
21. CEN+ : Center Channel volume up.
22. SURR+ : Surround Channel volume up.
23. 4
;: Play/Pause Only work under USB and BT
mode).
Reset: press and hold the button more than 3
sec. to set all function to manufacturer
defaults

Positioning the Sound Bar
Place on a flat Surface
Place the sound bar horizontally on a flat
surface such as a TV unit or shelves and align it
centrally with the TV screen. Allow some space
between the speaker and the wall. Don’t place
inside a cabinet or an a walled shelf. Follow this
guidance for best sound output and good
airflow around the sound bar.
Mount on the wall
WARNING : If you don’t feel confident to
correctly and securely wall-mount the sound
bar, Seek the assistance of an experienced
person of professional.
Install the speaker on a vertical, fast,
reinforced area of wall. For plaster walls, it is
recommended to screw into wall studs for
greater security. For optimum performance,
allow at least 25mm/1’’distance between the
sound bar and the TV.
üû

Pair up with the surround
1. Plug the soundbar into the main socket and
press "POWER/STANDBY" to turn on the
soundbar, then press" "INPUT" on the
soundbar to switch to the bluetooth (BT) mode.
2. Power on rear surround speakers. The blue
LED indicator on the surround will blink slowly
which indicates entering into pairing mode
between soundbar and the wireless surround.
3. Then long press the “switch button” on the
bottom of the rear surround for around 2.5
seconds. The blue indicator blinks quickly for
waiting for the soundbar and rear surround to
automatically pair.
4. After about 20-30 seconds, the blue
indicator of the rear surrounds changes to
steady on. The soundbar and rear surround
are paired successfully automatically.
5. The devices will be able to pair automatically
after the initial successful pair, even if they are

switched off and on.
6. If you want to pair your wireless surround
with another soundbar, please repeat step 1 to
step 4 above. Ensure that the soundbar you
want to pair with the surround are within range
turned on and any other pairing devices are
switched off or on standby.
Remark:
1. If the wireless surround speaker is turned
on, but the sound bar is in standby mode or
turned off (no power), the flashing blue
indicator light of the wireless surround
speaker will become red and stay on after
about 5 minutes, which means that wireless
surround speaker enter into the standby state.
2. In order to avoid receiving wireless signal
interference, when you are playing this
wireless sound bar system, please keep this
wireless sound bar system from your other
wireless devices and 2.4G devices at a proper
distance.
3. The maximum connection distance between
wireless surround and Sound bar: within 10
meters in the open space.

Follow below steps to mount the sound
bar on the wall
1. Paste 2 pieces of EVA foam (with holes) on
the two wall brackets aligning at the hole
position of wall brackets.
2. Remove 4 screws from the rear housing of
sound bar, then insert the 4 screws over the
wall bracket screw holes aligning (on the side of
EVA foam pasted), and then fasten the screws
again.
3. According to the two hanging wall positions
on the rear of soundbar, calibrate and mark
the two hanging brackets hole position on the
wall. Then drill two holes on the wall, firstly
insert two expansion plastic screws on the wall,
then fasten the hanging screws into expansion
screw holes.
4. Then Paste the 2 pieces of EVA foam (without
holes) on the two wall brackets downward.
Then place the hollow cross in the center of the
bracket against the screws on the wall and
hang the sound bar on the wall finally.

Follow below steps to mount the surround
speaker on the wall
1. Make 2 holes on the wall with distance of two
surround speakers you needed.
2. Put the plastic anchors onto the wall and
secure the screws to the plastic clip, do not
tighten the screws all the way make sure leave
some space
3. Attached the 2 EVA pads onto the wall mount
bracket. This will make sure that there is
enough space between the wall and the
surround speakers outlet, minimum 15mm.
4. Once the screws securely fastened, hang the
surround speaker over by inserting the screws
onto the wall mount bracket

OPERATE INSTRUCTIONS
Setting the Soundbar
1. Plug in the power cord and the display will
light up (Standby mode)
2. Switch on the sound bar by pressing
“STANDBY” button on sound bar or on remote
controller. After switching on, the default input
mode will appear on display.
3. Input modes can be changed by pressing the
“INPUT” button on sound bar or on remote
controller.
4. Below are input mode names appearing in
the soundbar display:
bt - Bluetooth Pairing mode
AU - AUX mode
OPt - Optical mode
Hd - ARC mode
Usb - USB mode

Powering On/Off
5. Plug the power cord of sound bar into a
power socket, it will automatically enter
standby mode.
6. Short-press the “STANDBY” button on
sound bar or on remote controller to turn on
the sound bar.
7. To turn off, press and hold the “STANDBY”
button for 2 seconds, then unplug from power
socket.
Playing Audio via BT Connection
1 Turn on the sound bar and then short-press
the “INPUT” button on sound bar or remote
controller to switch it to BT mode and LED
display on the sound bar will flicker in the
Bluetooth pairing mode.
2. Activate the pairing function on your phone
or other compatible device and select “ZEB-
JUKE BAR 9530WS PRO DOLBY 5.1” by BT
connection.
3. When successfully paired, you will hear a
tone and LED display will turn on “ bt ”and stop
flickering. Then music that you selected can be
played on the sound bar.
4. The remote controller includes BT mode
playback controls.

Notes:
Playing Audio via USB Port
The sound bar automatically switches to USB
input mode with the LED display “ Usb ” when a
USB flash drive is inserted (this mode isn't
selectable on the sound bar or remote control
unless a USB flash drive is connected).
1. Ensure that your USB flash drive contains
MP3 audio files (other file types not supported)
2. Connect the USB flash drive to the USB port
on the sound bar (or your own USB extension
cable connected to the USB port); music will
automatically play
3. The remote control includes USB input mode
playback controls