Zebronics ZEB-VITA PRO User manual

www.zebronics.com
User Manual
ZEB
VITA PRO
Mini Soundbar

Thank you for purchasing ZEB-VITA PRO
BT speaker. Please read this user manual
carefully before operation & save it for future
reference.
Note:
• Avoid the usage of this product at the high
temperature and high humidity environment.
• Avoid the self-disassembly of the products
or it results in voiding the product's
Warranty.
• Turn off the speaker when it is not in use.
To know more about Terms and conditions
for warranty policy, please visit
https://zebronics.com/pages/warranty-policy
Features:
Wireless BT
Supports USB & mSD card
Built-in FM Radio
AUX Input
Call Function
Media / Volume control
Built-in Rechargeable battery
Dual Passive Radiators
TWS Function
Wall Mountable
RGB LED Lights

Specifications:
Output power (RMS) : 24W (12W +12W)
BT version : 5.1
Driver size : 52mm x 2
Speaker Impedance : 4Ω
Frequency response : 100Hz-18kHz
S/N ratio : ≥70dB
Max. supportedUSB/
mSD memory size : 32GB
Supported
audio formats : MP3
Charging time : 3.5 H
Playback time : 10 H*
Product dimension : 47 x 6.7 x 6.5 cm
(W x D x H)
Net. weight : 920g
Package Contents
Speaker : 1 U
Charging cable : 1 U
QR code guide : 1 U

Button Description:
1. Power / Mode Button & TWS mode
2. Play/Pause, Scan Button, LED Modes &
LED on/off
3. Next / Volume+ Button
4. Prev. / Volume- Button
5. USB port
6. Microphone
7. Micro USB Charging Port
8. Micro SD card Port
9. AUX port
MODE
POWER DCIN
TF USB
AUX
SCAN

Button functions
1. Press the MODE button to change the
input mode of the speaker. Long press the
MODE button to power ON/OFF the speaker.
2. Short press the button to change the :
Next track or channel when in BT/USB mode
or FM mode respectively. Long press the
button to Increase the speaker volume.
3. Short press the button to go to the 9
Previous track or channel in BT/USB mode or
FM mode respectively. Long p ress the button
to decrease the speaker volume.
4. Press the button to Play/Pause the 4;
track being played. Long press the same
button to scan for FM channels in FM mode.
5. During calls, press the button to 4;
attend/end a call. Long press the button 4;
to reject an incoming call.
6. Double tap on MODE button to activate
TWS Mode
7. Long press SCAN button to change LED
light modes or on/off LED lights

Instructions for Use:
Charging the Speaker
1. Connect the USB charging cable to the
Micro USB Charging port of the speaker and
insert the other end into a USB Power
source/adapter.
2. Red LED glows indicating that the battery
is being charged. The Red LED will turn off
once it is fully charged.
Bluetooth mode
1. Power ON the speaker until you hear the
indication tone for Bluetooth mode.
2. Switch ON BT in your phone or tablet and
search for nearby BT devices.
3. Search for the BT name “ZEB-VITA PRO
RGB” and tap to connect it.
Micro SD / USB mode
Insert the Micro SD card / USB device to the
respective ports of ZEB-VITA PRO and the
speaker would automatically start playing
songs from the Micro SD card/USB device.
AUX mode
Connect the speaker to an audio source
(Phone/Laptop) using a 3.5mm to 3.5mm AUX
cable. Once connected, speaker automatically
changes to AUX mode and there after audio

can be streamed via the speaker from the
connected source.
FM mode
Switch the speaker into FM mode. Long
press the button, to start scanning, for FM 4;
channels. Once scanning is complete, press the
9 : / button to change the channels.
TWS function (requires two speakers)
a. Keep both speaker in Bluetooth mode.
b. Press play/pause button for 2 secs on
either of the speakers and a notification tone
for the TWS function can be heard.
c. Now switch ON the phone Bluetooth to
search for "ZEB-VITA PRO RGB" and tap to
pair it.
d. If you would like to disconnect the two
speaker, press play/pause button for 2 secs.
ISO 9001:2015 Certified Company
www.zebronics.com