Zenox Jupiter Series User manual

MK-II Gaming Chair Assembly Guide
Jupiter & Spectre Series
Assembly Videos
www.zenoxstore.com/pages/assembly-guides
Sit in the center of the chair,
back against the backrest.
請坐於椅子中間，背靠椅背.
請勿坐於椅子邊，造成傾倒危險.
請勿站在椅子上，或當成梯子或脚踏使用.
Do Not Sit at the edge of the chair,
as it will tilt the balance.
Do Not Stand on the chair, and use
it as any form of stool or ladder.
Be Careful when using the recliner and
other moving parts of chair.
請小心使用調角器和其他移動部件.
避免陽光直接照射產品，導致面料損壞.
Avoid Direct Sunlight as it would cause
fading and damage the upholstery.
避免使用强烈清潔劑或大力摩擦，導致面料損壞.
Avoid Strong Chemicals or scrubbing
excessively, as it would cause fading and
damage the upholstery.
CAUTION
HEAVY
SUPPORT
Contact us via email at [email protected],
or WhatsApp™ at [phone].
如有需要請以電郵或WhatsApp™跟我們聯絡.
The product is considerably heavy, grab a friend and do
the installtion together if possible.
產品有一定重量，如果可以找個朋友幫忙安裝.
Stop using the product with damaged parts.
如發現產品有損壞，請立刻停止使用.
Armrest Covers
Tilt Handles
D
E
I
MAGNET INSIDE
INSTALL REMOVE
Plug the handles into the tilt mechanism.
將把手裝到托盤上.

F
H
G
B
I
K
C
J
Congratulations.
Let’s get started.
Put together the base. Side and align the backrest and seat.
Remove the bolts and install the recliner.
Put togther the seat base and pillows.
Clip on the backrest side covers.
- 1 Set of Pillows (2pcs)
- 1 Backrest
- 1 Seat assembly with armrests
- 1 Set of armrest covers (2pcs)
- 1 Multi-tilt mechanism handle covers
- 1 Class-4 gaslift with covers
- 1 Wheelbase
- 1 Set of casters (5pcs)
- 1 Multi-tilt mechanism
- 1 Set of backrest side covers (2pcs)
- 1 Hex key
A
B
C
D
E
F
G
H
I
J
K
Package Content
B
A
E
H
K
D
G
J
C
F
I
*Bolts are pre-installed.
MAGNET INSIDE
MAGNET INSIDE
Step 01 Step 02
Step 03 Step 04
Step 05 Complete
把底座組合.
*螺絲已預先安裝在部件上.
用部件上的螺絲把托盤裝上.
把座椅和底座及頭腰枕裝上.
把椅背膠蓋裝上.
把椅背和座墊組合.
A
A