ZENS PuK Combi User manual

Top side
of surface
Bottom side
of surface
1.2
1.1
1
1.1Position the mold on the top side of the
surface.
1.2Draw the shape to indicate the position
of the PuK Combi.
|
Page 2
157x81 mm
| PuK Combi installation guide
Page 3
Use the jigsaw and follow the drawn
lines to cut out the correct shape.
2
PuK Combi
Installation guide
157x81 mm
PuK Combi installation guide
Included items Required tools
b
c
d
Jigsaw
(not included)
Screw
driver
Pencil or
pen
Measuring
tool
PuK Combi
Mounting
set
Installation
mold
a
f
g
h
e
|
Page 1 PuK Combi installation guide
Power
adapter

6
Enjoy charging your
devices with the
PuK Combi.
| PuK Combi installation guide
Page 6
5
1Connect the cable to the power
adapter and plug it into the nearest
power socket.
2Connect the shuko module to the
nearest power socket.
3Use the cable clips to neatly secure the
cables on the bottom of the surface.
| PuK Combi installation guide
Page 5
4
Use the two screws to fasten the bracket
and secure the product.
| PuK Combi installation guide
Page 4
Insert the PuK Combi in the opening
from above.
Important: leave no space between the
product and the surface.
3
All rights reserved. Zens is a trademark of Zens B.V.
Designed in the Netherlands. Assembled in China.
Zens B.V., High Tech Campus 85, 5656 AG Eindhoven, NL
www.makezens.com
1
3