DREAMS Soren User manual

Soren Double & King & Super King Bed
WOODEN BASE
METAL BASE

Thank you
Hello, thanks for choosing to purchase your bed from Dreams - you’re now on your way to your best
Ever night’s sleep. Before you begin building your bed, please take a moment to read through the
Instructions and make sure that you’ve got all the relevant parts listed on the following pages.
Top tip
We recommend that you build your new bed in the room you’d like it to be
Located - this will help prevent any risk of damage to your newly built bed
Whilst moving it .
Before you begin, it’s best to identify all parts and fittings to build your bed.
We advise laying these out on the floor to check you have everything, and
familiarising yourself before building.
Safety and care
It's really important to ensure children and animals are kept away from the
assembly area, as there are small components used in this bed which could
present a choking hazard, All plastic and wrapping materials should also be
kept away from children and animals to prevent any risk of suffocation.
To keep your little ones busy, there is a colouring page inside the back cover.
Help and support
At Dreams, it's our mission to give the whole nation a great night's sleep - this
means that the quality of our products is of utmost importance to us. If there
are any issues with your product or any missing parts, please visit our website
at www.dreams.co.uk /help
Recycling
Please ensure that packaging is disposed of in a safe and environmentally
friendly way, and recycle where. Please keep your assembly instructions
safe to refer back to in the future.
Soren Double & King & Super King Bed- Assembly Guide - Page 2
- Page9

Parts
Important infomation
Please identify which base you have purchased with your bed frame as the assembly method may
change. Once you have identified you have all of the relevant parts and fittings, please follow the
instructions for your chosen base below;
Static : page (5-9)
STATIC
Parts List
A. Headboard 1
B. Footboard 1
C. Side Rail 2
D. Center Support Leg 1
A
B
C
C
D
Soren Double & King & Super King Bed- Assembly Guide - Page 3

Fittings
Please check you have all the parts listed below with your product:
(E) Connect
x8pcs (F)Connect Bolt M8x74
x8pcs
(G) Spring Washer
Ø8
x8pcs
(H) Nut
M8
x8pcs
(I) Wood Dowel
Ø10x40
x4pcs
(J) Bolt
M6x35
x6pcs
(K) Jnc Nut
M6x22
x6pcs
(L) Screw
Ø4x45
x1pc
(M) Spanner
x1pc (N) Allen Key M4 x1pc
Identify the slat system you have purchased...
STANDARD WOODEN SLAT SYSTEM
AJ1-SPRUNG SLAT SYSTEM
Tools required
Please check you have all these below:
Flathead
screwdriver Scissors Spanner Tape measure Cross head
screwdriver
AJ3-METEL CENTER
SUPPORT LEG (A)X2 AJ4-METEL CENTER SUPPORT LEG (B)X1 AJ2-ALLEN HEAD
SCREW X 8
REFER STEP 3
TO STEP 4
REFER STEP 5
TO STEP 8
Soren Double & King & Super King Bed- Assembly Guide - Page 4

Static Bed Assembly
Screw the connecting bolt ( F) into headboard(A) and
footboard(B) as shown.
Knock the dowels (I) into the holes
indicated on head&footboard.
1
Use connectors (E), spring washer (G) and
Nuts (H) to fix the unit (see inset).
2
Cross Rail Assembly
A
B
C
C
H
M
EG
HM
E
G
F
I
AB
F
I
Soren Double & King & Super King Bed- Assembly Guide - Page 5

Attach the Metal Center Support Leg (AJ3) & (AJ4) to the middle of Sprung Slat (AJ1) with screw
(AJ2) Using Allen Key (N) provided as shown.
3
Metal support Leg Assembly
AJ2
AJ3
AJ4
AJ1
Soren Double & King & Super King Bed- Assembly Guide - Page 6

4
Attach the Sprung Slat System to the bed as shown. Tighten the screw to the side rail support
using hardware (J),(K),(N) & (M).
M
K
J
N
Static Bed Assembly
Soren Double & King & Super King Bed- Assembly Guide - Page 7

Static Bed Assembly
5
6
A
BC
C
Attach slats to the bed.
Tighten the first Slat to the Side Rail support
using hardware (K),(J),(N) & (M) as shown.
N
J
KM
Soren Double & King & Super King Bed- Assembly Guide - Page 8

Static Bed Assembly
10mm
CENTER
SUPPORT LEG
ADJUSTER
LEG
ADJUSTER LEG
HEIGHT
FLAT SLAT
ADJUSTER
LEG
Wooden Slat Assembly
7
8
L
NJ
K
M
Attach the Center Support Leg (D) to the Wooden Slats. Refer the diagram as shown.
Tighten the middle slat & last slat to the Side Rail support
using hardware (K),(J),(N) & (M) as shown.
D
Soren Double & King & Super King Bed- Assembly Guide - Page 9

Care and maintenance
Here are some tips to keep your new bed in tip - top condition
Cleaning
To clean your new bed, we’d advise using a warm damp cloth - please do not
use abrasive chemicals or bleach as this may damage the product.
Checking and moving
Periodically we recommend you check that the screws or fixtures haven’t been
Become loose, over time. To move your new bed, we recommend lifting it where
Possible, as dragging or pushing it could cause damage to your flooring.
Wood
Please note each of our wooden pieces are unique, meaning that markings and
shade can vary slightly between beds. Over a period of time, the wood might
Lighten or fade slightly due to light exposure.
Fabric
Please note depending on the lighting, positioning and surroundings of your
Room, the shade o the colour can sometimes appear slightly different. Over a
period of time, the colour might lighten or fade slightly due to light exposure.
Metal
Metal tends to be more resilient to everyday wear and tear. We recommend to
gently dust your metal furniture and keep it dry to maintain its look.
Thank you for shopping with us - we hope you
have a great night’s sleep
Soren Double & King & Super King Bed- Assembly Guide - Page 10