Zephyr FALCON nano MAX10-SoM User manual
MAX10 System on Module
(For use as a Production Module and/or
Development Kit with uilt in USB and WiFi)
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 1 of 17
User's Manual / Datasheet MAX10-SoM
1.0 Introduction ......................................................................................................................... 3
2.0 Features ............................................................................................................................... 3
3.0 Applications ....................................................................................................................... 3
3.1 Functional Block Diagram of Sample Applications .............................................. 4
4.0 MAX10-SoM Part Num ers .............................................................................................. 5
5.0 Customization (Hardware and/or Software) ....................................................................... 5
6.0 Compati ility with Intel PSG Daughter Cards ................................................................... 6
7.0 Specifications ...................................................................................................................... 7
8.0 Pin Outs ............................................................................................................................... 8
8.1 40 Pin Connector - JP2 ........................................................................................... 8
8.2 HSMC Connector - J17, Pins 1-40 .......................................................................... 9
8.3 HSMC Connector - J17, Pins 41-100 ................................................................... 10
8.4 HSMC Connector - J17, Pins 101-160 ................................................................. 11
8.5 HSMC Connector - J17, Pins 161-172 ............. ................................................... 12
8.6 LEDs - LED1 & LED2 ......................................................................................... 13
8.7 DIP switches - S1 .................................................................................................. 13
8.8 Momentary switches - SW1 & SW2 ..................................................................... 13
8.9 USB PHY Circuit: Microchip Technology USB3300 and USB-Micro-B Connector ........... 14
8.10 WiFi Modules: Silicon La s WGM160P ............................................................ 15
9.0 Initial Testing and Trou leshooting ................................................................................... 16
10.0 Limited Warranty ............................................................................................................. 17
Falcon Nano, Inc.
2560 W Brooks Ave, Unit Z
North Las Vegas, NV 89032
+1(702)710-1984 [email protected]
Copyright 2019 Falcon Nano Inc. All rights reserved.
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 2 of 17
The MAX10 System on Module, part num er MAX10-SoM, is a oard level solution for applications
which require an FPGA. The MAX10-SoM provides all the functionality of the Intel
10M08DAF256I7G. It is suita le for oth development work on a ench top or to e em edded into
products for production.
Because the MAX10-SoM has uilt in clocks, power supplies, USB, WiFi and connectors, it can save
system and design engineers weeks or months of development time. With a temperature rating of
-40~185°F (-40 ~+85° C), specific applications include: industrial IoT, cu esats, automotive (Grade 3
& 4), drones, etc.
Intel MAX10 10M08DAF256I7G (with options for other versions):
programma le in Quartus Prime
8k logic elements (with options for 2k or 50k)
38k its RAM
Analog I/O
USB 2.0
WiFi 802.11 /g/n
Connector, 40 pin header
Connector, 172 pin HSMC
Power supplies, 3.3V, 2.5V, 1.2V
Low transmission power consumption for attery life
FCC and IC Certification (other certifications availa le upon request)
Internet of Things (IoT)
Drones
Mo ile devices
Smart metering
Home automation and security
Commercial security and automation
Factory, petrochemical and industrial
Biomedical telemetry
Hospitals and health care facilities
Satellite (including geostationary, LEO, cu esat, nanosat and picosat)
Scientific and industrial telemetry
Machine-to-Machine (M2M) networks
Smart cities
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 3 of 17
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 4 of 17
Illustration 1: Functional Block Diagram of Sample Applications
Sample Part Num er and Availa le Options for the MAX10-SoM.
!"#$%&'%(
Zephyr Engineering Inc and Falcon Nano Inc can customize the MAX10-SoM hardware or develop software to
meet your specific requirements. Contact your local distri utor, Zephyr or Falcon Nano.
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 5 of 17
Audio
A : audio
N : no audio
USB
UB : USB Micro B
UA : USB Type A User Interfaces
U2 : USB Micro B & Type A 1 : LEDs
NU : no USB 2 : momentary s itch
3 : DIP s itches
4 : LEDs & DIP s itches
Member Code 5 : LEDs & momentary s itches
02 : 2k logic elements 6 : Momentary & DIP s itches
08: 8k logic elements 7 : LEDs, momentary & DIP s itches
50: 50k logic elements 8 : no user interfaces
Family 08 WF UB NE - N 4H 7 NB
Wireless Programmer
WF : WiFi BL : USB Blaster
BT : Bluetooth NB : no programmer
WB : WiF & Bluetooth
NW : no ireless
GPIO Connectors
40 : 40 pin
Ethernet HS : HSMC
E1 : Ethernet, 1 channel FM : FMC
E2 : Ethernet, 2 channels 4H : 40 pin and HSMC
NE : no Ethernet 4F : 40 pin and FMC
NC : no GPIO connectors
MAX10-SoM
) *%+,-.+
The MAX10-SoM is hardware compati le with the following Intel PSG (Altera) daughter cards:
- &
'
/0'
Servo Motor Kit Arrow/
Terasic
https://www.arrow.com/en/products/p0288/terasic-
technologies
SDI-HSMC Card Arrow/
Terasic
https://www.arrow.com/en/products/p0498/terasic-
technologies
AD/DA Data Conversion Card Arrow/
Terasic
https://www.arrow.com/en/products/p0003-
hsmc/terasic-technologies
Highspeed AD/DA Card Arrow/
Terasic
https://www.arrow.com/en/products/p0003/terasic-
technologies
DUAL XAUI TO SFP+ HSMC
BOARD
Arrow/
Terasic
https://www.arrow.com/en/products/p0092/terasic-
technologies
Transceiver Serial Digital Interface
HSMC Board
Arrow/
Terasic
https://www.arrow.com/en/products/p0039/terasic-
technologies
HSMC De ug and Loop ack
Connector Package
Arrow/
Terasic
https://www.arrow.com/en/products/p0057/terasic-
technologies
HSMC to Santa Cruz/USB/Mictor
Daughter Card
Arrow/
Terasic
https://www.arrow.com/en/products/p0006/terasic-
technologies
HSMC AR Radio Daughter Card Arrow/
Terasic
https://www.arrow.com/en/products/p0204/terasic-
technologies
8 Mega Pixel Digital Camera Board
with GPIO Interface
Terasic https://www.intel.com/content/www/us/en/programma le/so
lutions/partners/partner-profile/terasic-inc-/ oard/8-mega-pixel-
digital-camera- oard-with-gpio-interface.html
SATA/SAS HSMC Card Arrow/
Terasic
https://www.arrow.com/en/products/p0053/terasic-
technologies
GPIO-HSTC Card Terasic https://www.terasic.com.tw/cgi- in/page/archive.pl?
Language=English&CategoryNo=67&No=322
Multi-Touch LCD Module Second
Edition (MTL2)
Terasic https://www.terasic.com.tw/cgi- in/page/archive.pl?
Language=English&CategoryNo=68&No=989
Aptina Sensor Adapter Card (AHA-
HSMC)
Terasic https://www.terasic.com.tw/cgi- in/page/archive.pl?
Language=English&CategoryNo=68&No=625
CLR-HSMC Camera Link Receiver
Daughter Card
Terasic https://www.terasic.com.tw/cgi- in/page/archive.pl?
Language=English&CategoryNo=68&No=588
IEEE1588GE Card Macnica, Inc. https://www.intel.com/content/www/us/en/programma le/solutions/partn
ers/partner-profile/macnica--inc-/ oard/ieee1588ge-card.html
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 6 of 17
1'
FPGA: Intel PSG 10M08DAF256I7G (unless specified otherwise, see 4.0 MAX10-SoM art Numbers
a ove for alternatives.)
Power Systems: Enpirion EN6347AQ. 5.0, 3.3, 2.5 and 1.2 VDC
Input Power: 2.5 to 6.6 VDC, 4 Amp (max continuous operating current), arrel connector jack 2.00 mm
ID, 5.50 mm OD.
Operating Temp: -40C ~ +85C (-40F~185F) am ient
Size: 81.3x81.3 mm (3.20x3.20 inch). PCB thickness 1.57 mm (0.62 inch)
All dimensions are in mm unless specified otherwise.
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 7 of 17
23
The pin outs listed are for the MAX10-SoM with 8k logic elements. Consult factory for the 2k and 50k
logic element versions.
24
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 8 of 17
40 Pin Connector - JP2
MAX10 MAX10
40 pin or 40 pin or
connector other Description Bank connector other Description Bank
1 L3 IO,CLK0p,DIFFOUT_L18p 2 2 P1 IO,DPCLK1,DIFFOUT_L22p 2
3 M3 IO,CLK0n,DIFFOUT_L18n 2 4 N1 IO 2
5 L6 IO,DIFFOUT_L25p 2 6 M2 IO,DIFFOUT_L21n 2
7 L2 IO,DIFFOUT_L21p 2 8 N2 IO,DPCLK0,DIFFOUT_L22n 2
9 L1 IO,DIFFOUT_L19n 2 10 J6 IO,CLK1n,DIFFOUT_L20n 2
11 VCC5 12 GND
13 K5 IO,DIFFOUT_L25n 2 14 K2 IO,DIFFOUT_L19p 2
15 H6 IO,DIFFOUT_L14p 1 16 J5 IO,DIFFOUT_L14n 1
17 J3 IO,DIFFOUT_L16n 1 18 J2 IO,DIFFOUT_L16p 1
19 N4 IO,PLL_L_CLKOUTp,DIFFOUT_L27p 2 20 H5 IO,ADC1IN3,DIFFOUT_L3n 1
21 N3 IO,PLL_L_CLKOUTn,DIFFOUT_L27n 2 22 G5 IO,ADC1IN4,DIFFOUT_L3p 1
23 F5 IO,ADC1IN1,DIFFOUT_L1n 1 24 F4 IO,ADC1IN2,DIFFOUT_L1p 1
25 G2 IO,ADC1IN5,DIFFOUT_L5n 1 26 F1 IO,ADC1IN6,DIFFOUT_L5p 1
27 E3 IO,ADC1IN11,DIFFOUT_L4n 1 28 F2 IO,ADC1IN12,DIFFOUT_L4p 1
29 VCC3P3 30 GND
31 E1 IO,ADC1IN7,DIFFOUT_L7n 1 32 D1 IO,ADC1IN8,DIFFOUT_L7p 1
33 C2 IO,ADC1IN13,DIFFOUT_L6n 1 34 C1 IO,ADC1IN10,DIFFOUT_L8p 1
35 B1 IO,ADC1IN15,DIFFOUT_L8n 1 36 B2 IO,ADC1IN14,DIFFOUT_L6p 1
37 C4 IO,ADC1IN9,DIFFOUT_L2n 1 38 C3 IO,ADC1IN16,DIFFOUT_L2p 1
39 A2 IO,DIFFOUT_T25n 8 40 A3 IO,DIFFOUT_T25p 8
2$415
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 9 of 17
HSMC Connector - J17, Pins 1-40
MAX10 MAX10
HSMC or HSMC or
connector other Description Bank connector other Description Bank
1 nc 2 nc
3 nc 4 nc
5 nc 6 nc
7 nc 8 nc
9 nc 10 nc
11 nc 12 nc
13 nc 14 nc
15 nc 16 nc
17 nc 18 nc
19 nc 20 nc
21 nc 22 nc
23 nc 24 nc
25 nc 26 nc
27 nc 28 nc
29 nc 30 A10 IO 7
31 nc 32 A14 IO 7
33 M10 IO,DIFFOUT_B27p 4 34 L10 IO,DIFFOUT_B27p 4
35 nc 36 nc
37 nc 38 nc
39 G11 IO,DPCLK3,DIFFOUT_R26p 6 40 G12 IO,DPCLK2,DIFFOUT_R26n 6
2$415
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 10 of 17
HSMC Connector - J17, Pins 41-100
MAX10 MAX10
HSMC or HSMC or
connector other Description Bank connector other Description Bank
41 N5 IO,DIFFOUT_B1p 3 42 H11 IO,DIFFOUT_R20p 6
43 P4 IO,DIFFOUT_B1n 3 44 H12 IO,DIFFOUT_R20n 6
45 VCC3P3 46 VCC6
47 L7 IO,DIFFOUT_B3p 3 48 G14 IO,DIFFOUT_R22p 6
49 M6 IO,DIFFOUT_B3n 3 50 G15 IO,DIFFOUT_R22n 6
51 VCC3P3 52 VCC6
53 P5 IO,DIFFOUT_B5p 3 54 G16 IO,DIFFOUT_R23p 6
55 R4 IO,DIFFOUT_B5n 3 56 F16 IO,DIFFOUT_R23n 6
57 VCC3P3 58 VCC6
59 R5 IO,DIFFOUT_B7p 3 60 F14 IO,DIFFOUT_R27p 6
61 R6 IO,DIFFOUT_B7n 62 E14 IO,DIFFOUT_R27n 6
63 VCC3P3 64 VCC6
65 L8 IO,DIFFOUT_B9p 3 66 E15 IO,DIFFOUT_R28p 6
67 M7 IO,DIFFOUT_B9n 3 68 E16 IO,DIFFOUT_R28n 6
69 VCC3P3 70 VCC6
71 P6 IO,DIFFOUT_B10p 3 72 D15 IO,DIFFOUT_R34p 6
73 R7 IO,DIFFOUT_B10n 3 74 C15 IO,DIFFOUT_R34n 6
75 VCC3P3 76 VCC6
77 P8 IO,DIFFOUT_B12p 3 78 D16 IO,DIFFOUT_R18p 6
79 P9 IO,DIFFOUT_B12n 3 80 C16 IO,DIFFOUT_R18n 6
81 VCC3P3 82 VCC6
83 M9 IO,DIFFOUT_B14p 3 84 K15 IO,DIFFOUT_R15n 6
85 M8 IO,DIFFOUT_B14n 3 86 H16 IO,DIFFOUT_R17n 6
87 VCC3P3 88 VCC6
89 P13 IO,DIFFOUT_B21n 4 90 J14 IO,DIFFOUT_R15p 6
91 R11 IO,DIFFOUT_B19n 4 92 H15 IO,DIFFOUT_R17p 6
93 VCC3P3 94 VCC6
95 D14 IO,PLL_R_CLKOUTp,DIFFOUT_R33p 6 96 J11 IO,CLK2p,DIFFOUT_R14p 6
97 C14 IO,PLL_R_CLKOUTn,DIFFOUT_R33n 6 98 J12 IO,CLK2n,DIFFOUT_R14n 6
99 VCC3P3 100 VCC6
2$415)
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 11 of 17
HSMC Connector - J17, Pins 101-160
MAX10 MAX10
HSMC or HSMC or
connector other Description Bank connector other Description. Bank
101 R8 IO,DIFFOUT_B11p 3 102 L11 IO,DIFFOUT_R3p 5
103 T8 IO,DIFFOUT_B11n 3 104 L12 IO,DIFFOUT_R3n 5
105 VCC3p3 106 VCC6
107 R9 IO,DIFFOUT_B13p 3 108 L16 IO,DIFFOUT_R11n 5
109 T9 IO,DIFFOUT_B13n 3 110 M16 IO,DIFFOUT_R11p 5
111 VCC3p3 112 VCC6
113 R1 IO,DIFFOUT_B2p 3 114 L15 IO,DIFFOUT_R10n 5
115 P2 IO,DIFFOUT_B2n 3 116 K14 IO,DIFFOUT_R10p 5
117 VCC3p3 118 VCC6
119 R2 IO,DIFFOUT_B4p 3 120 M14 IO,DIFFOUT_R6n 5
121 R3 IO,DIFFOUT_B4n 3 122 M15 IO,DIFFOUT_R6p 5
123 VCC3p3 124 VCC6
125 T2 IO,DIFFOUT_B6p 3 126 P15 IO,DIFFOUT_R5n 5
127 T3 IO,DIFFOUT_B6n 3 128 N14 IO,DIFFOUT_R5p 5
129 VCC3p3 130 VCC6
131 T4 IO,DIFFOUT_B8p 3 132 R14 IO,DIFFOUT_R1n 5
133 T5 IO,DIFFOUT_B8n 3 134 P14 IO,DIFFOUT_R1p 5
135 VCC3p3 136 VCC6
137 P11 IO,DIFFOUT_B18p 4 138 P16 IO,DIFFOUT_R7n 5
139 M11 IO,DIFFOUT_B27n 4 140 N16 IO,DIFFOUT_R7p 5
141 VCC3p3 142 VCC6
143 R12 IO,DIFFOUT_B19p 4 144 T15 IO,DIFFOUT_R2n 5
145 P10 IO,DIFFOUT_B18n 4 146 T14 IO,DIFFOUT_R2p 5
147 VCC3p3 148 VCC6
149 P12 IO,DIFFOUT_B21p 4 150 K11 IO,DIFFOUT_R8p 5
151 L9 IO,DIFFOUT_B20p 4 152 K12 IO,DIFFOUT_R8n 5
153 VCC3p3 154 VCC6
155 R10 IO,DIFFOUT_B16p 3 156 J15 IO,CLK3p,DIFFOUT_R16p 6
157 T11 IO,DIFFOUT_B16n 3 158 J16 IO,CLK3n,DIFFOUT_R16n 6
159 VCC3p3 160 VCC6
2!$415)1
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 12 of 17
HSMC Connector - J17, Pins 161-172
MAX10
HSMC or
connector other Description. Bank
161 GND
162 GND
163 GND
164 GND
165 GND
166 GND
167 GND
168 GND
169 GND
170 GND
171 GND
172 GND
2)/6-/6-7/6-
21-%+
22*%+878
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 13 of 17
LEDs - LED1 & LED2
MAX10 MAX10
or or
LED1 other Description Bank LED2 other Description Bank
1VCCIO3p3 1VCCIO3p3
2 T6 IO 3 2 C10 IO,DIFFOUT_T16p 8
3 T12 IO 4 3 A12 IO,DIFFOUT_T17n 8
4 R15 IO 5 4 A11 IO,DIFFOUT_T17p 8
DIP switches - S1
MAX10 MAX10
or or
DIP switches other Description. Bank DIP switches other Description. Bank
1GND 5 A9 IO,VREFB8N0 8
2GND 6 A15 IO,VREFB7N0 7
3GND 7 M1 IO,VREFB2N0 2
4GND 8 B10 IO,DEV_CLRn,DIFFOUT_T16n 8
MAX10 MAX10
or or
SW1 other Description. Bank SW2 other Description. Bank
1 GND 1 GND
2 B9 IO,DIFFOUT_T19p 8 2 A10 IO 8
*%+9878
2:;<$=>+?+.*;<;<<
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 14 of 17
US PHY Circuit: Microchip Technology US 3300 and US -Micro- Connector
USB MAX10 Connector,
PHY or USB-
data other Description Bank USB3300 MICRO-B
0A4 IO,DIFFOUT_T26n 824
1 A5 IO,DIFFOUT_T23n 8 23
2 B6 IO,DIFFOUT_T20p 8 22
3 C6 IO,DIFFOUT_T20n 8 21
4 C5 IO,DIFFOUT_T22n 8 20
5 B5 IO,DIFFOUT_T22p 8 19
6 B4 IO,DIFFOUT_T23p 8 18
7 B3 IO,DIFFOUT_T26p 8 17
Reset A8 IO,DIFFOUT_T19n 8 10
NXTB B8 IO,DEV_OE,DIFFOUT_T18p 8 11
STPB A7 IO,DIFFOUT_T21p 8 13
DIRB B7 IO,DIFFOUT_T18n 8 12
CLKB A6 IO,DIFFOUT_T21n 8 14
D-/DM 8 2
D+/DP 7 3
ID/ID 5 4
28>/ 8,)
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 15 of 17
WiFi Modules: Silicon Labs WGM160P
MAX10 WiFi
or Module
WiFi other Description Bank WGM160P
UART RX E11 IO,DIFFOUT_T1n 747/PE6
UART TX C12 IO,DIFFOUT_T2n 746/PE7
SWDIO E10 IO,DIFFOUT_T8n 745/PF1
SWCLK F10 IO,DIFFOUT_T8p 744/PF0
Reset C9 IO,DIFFOUT_T12n 834/RESETn
UART CTS F11 IO,DIFFOUT_T3p 726/PB6
UART RTS D12 IO,DIFFOUT_T1p 725/PB5
SCLK D9 IO,DIFFOUT_T12p 8 14/PE14
CS0 E9 IO,DIFFOUT_T14n 8 16/PA0
CS1 F9 IO,DIFFOUT_T14p 8 17/PA1
DQ0 B11 IO,DIFFOUT_T15n 8 18/PA2
DQ1 B12 IO,DIFFOUT_T17n 8 19/PA3
DQ2 C13 IO,DIFFOUT_T12p 720/PA4
DQ3 F12 IO,DIFFOUT_T3n 721/PA5
DQ4 A13 IO,DIFFOUT_T10n 722/PB3
DQ5 B13 IO,DIFFOUT_T10p 724/PB4
RF1 I/O On-chip-antenna
RF2 I/O SMA Connector, J70
:?.? +.
Your MAX10-SoM was manufactured y AS9100 and ISO9001 processes. It was fully tested and passed a
urn in process efore eing shipped to you. It is ready for your custom program to e downloaded and the
MAX10-SoM installed into your final product. (Contact your local distri utor, Zephyr Engineering or Falcon
Nano if you wish to have your custom program installed in your MAX10-SoM efore it is shipped to you.)
If your project is still in the development stage, we recommend the following. After removing your MAX10-
SoM from it's factory ox the first time, apply power. The factory program will start a self-test. You will see
the user programma le LEDs of LED 1 and LED 2 cycling in a sequence of “on” for 1 second and then off
followed y the adjacent LED until the pattern repeats. Once you have seen the LED 1 and LED 2 sequence
properly, remove power from the MAX10-SoM. Install the MAX10-SoM 40-pin Loop ack Connector Board
and the MAX10-SoM HSMC Loop ack Connector Board. Apply power. The factory program will perform a
more advanced self-test. The factory program will e sending signals sequentially to pins and verifying receipt
of those signals y other pins. The LEDs on the Connector Boards will continuously cycle through a series of
LEDs on and off.
If at any point during these self-tests, the factory program detects an error, it will stop cycling the LEDs on and
off. Depending on the error, the factory program may give an indication of what the pro lem is. See the
MAX10-SoM Look Back Connector Board Instructions for details on further trou leshooting steps.
If your MAX10-SoM has already had your custom program installed and you suspect the MAX10-SoM
hardware may not e operating properly, power off the MAX10-SoM. Apply power again. If you are still not
getting the results you expect, re-install the factory program. Perform the steps listed in the paragraphs a ove.
If the MAX10-SoM does not pass the self-tests, your MAX10-SoM may e damaged and may need to e
returned for repair. Contact Zephyr Engineering or Falcon Nano.
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 16 of 17
/8*
Effective July 29, 2019
This warranty supersedes all previous Falcon Nano Inc. warranties and is exclusive, with no other guarantees or warranties expressed
or implied. There are no warranties which extend eyond the description on the face hereof.
Falcon Nano Inc. warrants its Products to the original purchaser (the "Customer") to e free from defects in material and workmanship. In no event,
however, shall Falcon Nano Inc. e lia le or have any responsi ility under such warranty if the Products have een improperly stored, installed, used
or maintained, or if customer has permitted any unauthorized modifications, adjustments and/or repairs to such Products. Falcon Nano Inc.'s
o ligation hereunder is limited solely to repairing or replacing (at its option), at its factory any Products, or parts thereof, which prove to Falcon Nano
Inc.'s satisfaction to e defective as a result of defective materials or workmanship, in accordance with Falcon Nano Inc.'s stated warranty, provided,
however, that written notice of claimed defects shall have een given to Falcon Nano Inc. within ninety (90) days after the date of the product was
purchased, as stated on the sales invoice. The products or parts claimed to e defective must e returned to Falcon Nano Inc., transportation prepaid
y the Customer, with written specifications of the claimed defect. Evidence accepta le to Falcon Nano Inc. must e furnished that the claimed
defects were not caused y misuse, a use, or neglect y anyone other than Falcon Nano Inc..
A copy of the invoice showing the date of sale must accompany products returned for warranty repair or replacement.
All Product returned to Falcon Nano Inc. for service must e properly packaged to guard against damage from shipping. Falcon Nano Inc. will not
e responsi le for any damages resulting from shipping.
THE WARRANTIES STATED ABOVE IS IN LIEU OF ALL OTHER WARRANTIES (EXCEPT AS TO TITLE), WHETHER EXPRESSED OR
IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR
PURPOSE, AND IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF Falcon Nano Inc. Falcon Nano Inc.'s
MAXIMUM LIABILITY WITH RESPECT TO THESE WARRANTIES, ARISING FROM ANY CAUSE WHATSOEVER, INCLUDING
WITHOUT LIMITATION, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY, TORT WARRANTY, PATENT OR COPYRIGHT
INFRINGEMENT, SHALL NOT EXCEED THE PRICE SPECIFIED OF THE PRODUCTS GIVING RISE TO THE CLAIM, AND IN NO EVENT
SHALL Falcon Nano Inc. BE LIABLE UNDER THESE WARRANTIES OR OTHERWISE, EVEN IF Falcon Nano Inc. HAS BEEN ADVISED OF
THE POSIBILITY OF SUCH DAMAGES, FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT
LIMITATION, DAMAGE OR LOSS RESULTING FROM INABILITY TO USE THE PRODUCTS, INCREASED OPERATING COSTS
RESULTING FROM A LOSS OF THE PRODUCTS, LOSS OF ANTICIPATED PROFITS, OR OTHER SPECIAL INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, WHETHER SIMILAR OR DISSIMILAR, OF ANY NATURE ARISING OR RESULTING FROM THE
PURCHASE, INSTALLATION, REMOVAL, REPAIR, OPERATION, USE OR BREAKDOWN OF THE PRODUCTS, OR ANY OTHER CAUSE
WHATSOEVER, INCLUDING NEGLIGENCE.
EXCEPT AS EXPRESSLY PROVIDED BY Falcon Nano Inc. IN WRITING, Falcon Nano Inc.'s PRODUCTS ARE INTENDED FOR ULTIMATE
PURCHASE BY COMMERCIAL/INDUSTRIAL USERS FOR OPERATION BY PERSONS TRAINED AND EXPERIENCED IN THE USE AND
MAINTENANCE OF THE PRODUCTS AND NOT FOR CONSUMERS OR CONSUMER USE. Falcon Nano Inc. WARRANTIES DO NOT
EXTEND TO, AND NO RE-SELLER IS AUTHORIZED TO EXTEND Falcon Nano Inc. WARRANTIES TO ANY CONSUMER.
INDEMNIFICATION AND SAFE OPERATION
Customer shall comply with and require its employees to comply with directions set forth in instructions, manuals and customer training furnished y
Seller and shall use and require its employees to follow such instructions, manuals and customer training and to use reasona le care in the use and
maintenance of the Products. Customer shall not remove or permit anyone to remove any warning or instruction signs on the Products. In the event
of personal injury or damage to property or usiness arising from the use of the Products, Customer shall within forty-eight (48) hours thereafter give
Seller written notice of such injury or damage. Customer shall cooperate with Seller in investigating any such injury or damage and in the defense of
any claims arising therefrom.
Falcon Nano Inc. reserves the right to change product specifications at any time without notice, including ut not limited to performance, dimensions,
component part num ers, manufacturing processes, test procedures, etc.
Seller provides no warranties or guaranties of merchanta ility or fitness for the purposes for which product is sold. Customer shall indemnify and
hold Seller harmless against any claims, loss or expense for injury or damage arising from the use of the Products.
No person, including any agent, distri utor, or representative of Falcon Nano Inc., is authorized to make any representation or warranty on ehalf of
Falcon Nano Inc. concerning any Products manufactured y Falcon Nano Inc., except to refer purchasers to this warranty. This warranty is good only
to the original purchaser of the product during the warranty period as long as it is in the U.S. including Alaska, Hawaii and U.S. Territories.
If you require service during or after the warranty period, please contact support@FalconNano.com.
*For purposes of this warranty policy, "Customer" means the original purchaser from Falcon Nano, its affiliates or distri utors.
_________________________________________________________________________________________
Falcon Nano Inc. Preliminary/For Reference Only MAX10-SoM User's Manual Rev 1.1 Page 17 of 17
This manual suits for next models
1
Table of contents
