Zero Wireless Qi Pad Operating and safety instructions

Welcome Guide
Wireless Qi Pad

What’s in the box
Zero Wireless Qi Pad
USB Type-CMagnetic Pad

Parts of the Wireless Qi Pad
The contact points are used to charge the Wireless Qi Pad
via Zero’s Travel Cube or Home Dock. If you don’t have another
Zero device, you can charge the Wireless Qi Pad via the USB
Type-C port.
Charger Port Power
Button
LED Indicator
Charging Points

Charge your Zero Wireless Qi Pad
When your Zero Wireless Qi Pad is charging, the LED
indicator will be red.When your Zero Wireless Qi Pad is fully
charged, the LED indicator will turn green.
Red
Charging
Green
Fully Charged

Using your Zero Wireless Qi Pad
Check the battery level of your Zero Wireless Qi Pad by
looking at the LED indicator.
Red
≤ 20%
Orange
21% - 79%
Green
80% - 100%

Before using your Zero Wireless
Qi Pad
1. Make sure your device is Qi compatible
• iPhone models: SE, 8, 8Plus, X, XS, XS Max, XR, 11, 11
Pro, 11 Pro Max, 12, 12 mini, 12 Pro Max, 12 Pro
• Android models: Most wireless enabled Qi devices
2. Remove your phone case.

3. Turn on the Qi Pad and nd your phone’s charging spot.
Place the Qi Pad on the back of your phone and move the
Qi Pad around to locate your phone’s charging spot.
4. Clean the back of your phone.

5. If you want to use a phone case, make sure your phone
case is compatible.
• Using an ultra-thick protective phone case, case with
magnetic/iron plate, or “wallet” style case that holds credit
cards are not compatible.
• The Wireless Qi Pad supports charging through phone
cases up to 4mm thick.

How to use the Wireless Qi Pad
without a phone case
• Peel the protective lm off the back of the magnetic pad and
stick it on top of the charging spot on the back of your phone.
• After the Qi Pad magnetically attaches to your phone, press
the power button to start charging.

How to use the Wireless Qi Pad with
a phone case
• Peel the protective lm off the back of the magnetic pad and
stick it on top of the charging spot on the back of your phone,
the put your phone case back on.
• Attach the Qi Pad to the back of your phone and press the
power button to start charging.

Specications
To preserve the lifespan of your Wireless Qi
Pad, recharge at least once every 3 months
Store in a dry, cool place and do not expose the
Wireless Qi Pad to liquids
Do not attempt to disassemble or modify the unit
Model No.
Wireless Charge
Input
Output
Size
Weight
ZERO-Qi-3000
3000 mAh
5V / 2A
5V / 2A & 5W (Qi)
80 x 60 x 13.5 mm / 3.3 x 2.4 x 0.5 in
102 g / 3.5 oz

Warranty Information
The company hereby warrants to the original retail purchaser of
this product that should this product or any part thereof, under
normal use and conditions, be proven defective material or
workmanship within one year parts and 90 days labor from the
date of the original purchase, such as defect (s) will be repaired
with recondition product (at the company’s option) for parts and
repair labor. This limited warranty is the purchaser’s exclusive
remedy for any such defect (s).
To obtain repairs or replacement within the terms of this warranty,
Proof of warranty coverage (i.e. – dated bill of sale) is required.
This warranty does not apply to any product or part thereof which,
in the opinion of the company, has suffered or been damaged
through alteration, improper installation, mishandling, misuse,
neglect, accident or by removal or defacement of the factory
serial number/bar code label (s).
Please visit www.myzerocharge.com
or
Contact us 1-877-515-1544
Open Mon-Fri 9am – 5pm PST
Zero International Limited
20955 Pathnder Road. #100
Diamond Bar, CA 91765

The opinion of the company with respect to this matter shall be
nal. THE EXTENT OF THE COMPANY’S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVEN,
SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE
PRICE PAID BY PURCHASER FOR THE PRODUCT. THIS
WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
WARRANTIES OR LIABILITES. ANY IMPLITED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HERE UNDER, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, MUST BE BOUGHT WITHIN A PERIOD OF
12 MONTHS FROM THE DATE OF ORIGINAL PURCHASE. IN
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY EXPRESS OR IMPLIED WHATSOEVER.
No person or representative is authorized to assume for the
company any liability other than expressed herein connection
with the sale of this product. Some jurisdiction do not allow
limitations on how long an implied warranty lasts or the exclusion
of limitation of incidental or consequential damages so the above
limitations or exclusions may not apply to you. This warranty gives
you specic legal rights and you may also have other rights,
which vary from jurisdiction to jurisdiction

FCC Statement
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
that may cause undesired operation.
Changes or modications not explicitly approved by the party
responsible for compliance could void the user’s authority to
operate this equipment. Note: this equipment has been tested and
found to comply with the limits for a Class B digital device,
pursuant to part 15 and part 18 of the FCC Rules. These limits are
designed to provided reasonable protection against interference in
a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does not cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measure:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help. The equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. During the operation
of device distance of 15 cm surrounding the device and 20 cm

Caution
above the top surface of the device must be respected. This
device complies with Part 18 of the FCC Rules. This equipment
generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with instructions, may
cause harmful interference to radio communications. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
• Increase the separation between the equipment and any other
radio device.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Do not put the battery into re or heating furnace in a way that may
cause explosion, or dispose of the battery by mechanical extrusion
or cutting;
Do not place the battery in an extremely high temperature
environmental may cause the battery to explode or leak combustible
liquids or gases;
Do not place the battery in an extremely low pressure environment
that may cause the battery to explode or leak ammable liquids and
gases.
1. The normal operating temperature range of the product is 5~45ºC
2. Product storage and transportation temperature range 0~50ºC;
3. The product storage and transportation temperature range 0~35ºC;
4. Don’t low than 86kPa air pressure that may result in an explosion
or the leakage of ammable liquid or gas.

Customer Service
12-month limited warranty
Lifetime technical support
[email protected]
1-877-515-1544 Mon-Fri 9:00 am – 5:00 pm PST
www.myzerocharge.com