Zetlight Nano Series Instruction manual

ZETLIGHT
ZETLIGHT
Quick Start Manual
Nano Series
For ZN1701 & ZN1702
Stylish,Energy Efficient
Cool,Quiet & Fanless
www.zetlight.com
ZETLIGHT LED SYSTEM

The use of safety guidelines
* For your safety, please read these operating instructions carefully before using ZETLIGHT
NANO LED Lighting System.
* NEVER LOOK DIRECTLY AT THE LEDS. Light emitted from LEDs may cause eye and/or
skin damage not covered by ZETLIGHT. UV and Invisible Radiation (IR) emitted from this
product can case permanent damage. Always minimize exposure to eyes and skin.
* A drip loop must be used with all electrical aquarium devices. A drip loop is a self-made part
of the cord hanging below the receptacle. (See Fig. 1)
* If you wrong operation caused personal safety and equipment damage, our company will be
no responsible for it.
* Check the power cord, plug and socket are intact.
* Before your wiring, please read the state and local laws, make sure to use a compliant
power adapter.
* To commission a qualified person for the wiring installation.
* To fix the light fixture reliably and steadily.
* Do not place anything on the product.
* Avoid objects into the product. Keep the slot and ventilation opening clean, they should not
be blocked and covered.
* Please do not splash water on it, and do not put it into water.
* If the light fixture/power supply are damaged, please repair or replace it by professionals.
Hardware assembly & installation
Required tools
Flathead Screwdriver with small tip
1.Attach the Mouthing Bracket to the LED Housing with the Mounting Screws. Use a small
Flathead
Screwdriver to fasten and tighten down the Mounting Screws.
2.Attach the Mouthing Bracket and LED Housing to the chosen aquarium panel with Mounting
Bolts.
Fasten and tighten down the Mounting Screws by hand.
3.Please unplug the battery protection part before you use the remote controller
Getting Started
Thank you for choosing ZETLIGHT NANO series
as your LED lighting system
1
3
ZETLIGHT
NOTE: If extra Mounting Bolts and/or
Screws are included, please save as re-
placement parts.
Package content
2
ZETLIGHT
1
2
3
45
6
Parts diagram
1. LED Housing
2.Power Source
3.Mounting Bracket
4. Mounting Bolts x 2
5. Mounting Screws x2
Infrared remote
controller
6.
Parts list
Please check the content in the package

Touch switch instruction
①.Power ON / OFF button
Click once–ON, twice–Off, three times–ON again circularly
②.Brightness control button
Press this button to adjust white & blue brightness from 1 to 5 modes circularly.
Touch switch
Mode
1
2
3
4
5
White intensity(%)
0
0
10
10
30
100
100
100
100
100100
Blue (%)intensity
① ②
ZETLIGHT R
①
②
③
④
⑤
Remote controller
Memory function is designed to save all of your settings after iding for 10 seconds.
Memory function
Infrared remote controller
①. Power ON / OFF button
Click once –ON, twice –Off, three times –ON again circularly
②.Weather mode button
Click this button once into Lightning mode, twice into Cloudy mode, three times
into lightning mode again circularly. By “+” /”-” button, you can adjust the
frequency of lightning/cloudy.
③.Light button
Press this button into the lighting mode setting. By “+” /”-” button, you can adjust
the brightness of white light. Press this button again to adjust the brightness of
blue light by “+” /”-” button. The light button can be circularly pressed for
white/blue light adjustment.
④. “+” button
In the lighting mode: Brightness up of blue / white by “+”.
In the weather mode: Enhancing the lightning/cloudy frequency by “+”.
⑤. “-” button
In the lighting mode: Brightness down of blue / white by “-”.
In the weather mode: Reducing the lightning/cloudy frequency by “-”.
⑥.Receiver
The remote control should face toward the receiver to control functions of the
light.
Product specifications
Model
Input voltage
LED
Color temp for white LED
Wavelength for blue LED
Lumens
10W
790LM
ZN1701 ZN1702
100V-240V100V-240V
12000K 12000K
450-465NM 450-465NM
450LM
10W
⑥

Dear user:
To make sure you can use our company's products adroitly and enjoy excellent
after-sales service, please carefully read the product manual and installation
plans,please conserve this card carefully.
Product Warranty:
The warranty card is the only warranty certificate, and it will be effective only when
the card was sealed by the dealer. Products from the purchase date (sales receipts
to date of purchase) of 12 months, are warrantied. Except the followings:
Limited warranty:
1) cannot provide the certificate or a valid sales document, or altered, or does not
match with the product.
2) due to misuse, abnormal use, taking apart by yourself, altering the appearance
and other human factors damage.
3) fails to product specifications and proper installation diagram, use and
maintenance of damage.
4) parts of consumables and consumption of normal wear and tear.
5) due to natural disasters and other force majeure (such as earthquakes,fires,
typhoons, lightning, etc.) causes the failure or damage.
ZETLIGHT will not see to the other products and related equipments, furnitures.
Warranty service within the scope of the project is free, after the warranty period,
repair or maintenance, will be charged an appropriate fee. When it needs to be
repaired, you need toprovide this card and sales invoice.So please keep it
carefully.Thanks.
Product Model Number
Item Serial Number
Customers
Phone
Address
Dealer
Purchase Date
The light does
not work
Problem
Check whether it uses normal 24V A/C
adapter or not
Use standard 24V A/C
adapter
Check whether adapter plug is loose
with the light or not
Tighten between the adapter
and socket
Check whether the fixture is at off
condition or not
Use remote control to open
the light
Remotecontroller
does not work
Check whether the battery protection
part of remote control is pulled out or not Pull battery protection part out
Check whether battery of remote control
is of electricity or not
Replace battery of remote
control
Troubleshooting
Checking Solution
0-20
21-40
41-60
61-80
81-100
101-120
PAR measurement
Color spectrum
CM/
INCH
CM/
INCH
0
0
0
15
15
15
10
10
10
5
5
5
5
5
5
10
10
10
15
15
15
5.90
5.90
5.90
3.94
3.94
3.94
1.97
1.97
1.97
1.97
1.97
1.97
3.94
3.94
3.94
5.90
5.90
5.90
0
0
0
15/5 .90
15/5 .90
15/5.90
15/5.90
15/5.90
15/5 .90
10/3 .94
10/3 .94
10/3.94
10/3.94
10/3 .94
10/3.94
5/1. 97
5/1. 97
5/1. 97
5/1. 97
5/1. 97
5/1. 97
CM/
INCH
15.24CM/6INCH
22.86CM/9INCH
27.94CM/11INCH
30CM/
11.8INCH
30CM/
11.8INCH
30CM/
11.8INCH
5.5CM/
2.165INCH
For Rimless Tanks Only.
Maximum Glass Thickness=7mm
400 45 0 5 0 0 5 5 0 60 0 6 5 0 7 00 7 5 0
100
80
60
40
20
0
Wavelength(nm)
Relative Radiant Power(%)
Wavelength for blue LED:450-465nm
Wavelength(nm)
Relative Radiant Power(%)
400 45 0 5 0 0 5 5 0 60 0 6 5 0 7 00 7 5 0
100
80
60
40
20
0
Color temp for white LED:12000K
Company Chop
Warranty