Zhejiang DVR300-08E User manual

DVR200/300Series
DigitalVideoRecorders
UserManual
ManualVersion:100‐20140128
ZhejiangUniviewTechnologiesCo.,Ltd.

©2014,ZhejiangUniviewTechnologiesCo.,Ltd.anditslicensors

AllRightsReserved
Nopartofthismanualmaybereproducedortransmittedinanyformorbyanymeanswithoutprior
writtenconsentofZhejiangUniviewTechnologiesCo.,Ltd.
Notice
Theinformationinthismanualissubjecttochangewithoutnotice.Everyefforthasbeenmadeinthe
preparationofthismanualtoensureaccuracyofthecontents,butallstatements,information,and
recommendationsinthismanualdonotconstitutethewarrantyofanykind,expressorimplied.
EnvironmentalProtection
Thisproducthasbeendesignedtocomplywiththeenvironmentalprotectionrequirements.Thestorage,
use,anddisposalofthisproductmustmeettheapplicablenationallawsandregulations.
SafetyandComplianceInformation
ConventionsUsedSymbol
Thesymbolsinthischapterareshowninthefollowingtable.Theyareusedtoremindthereaderofthe
safetyprecautionsduringequipmentinstallationandmaintenance.

Safety Symbol Description
Generic alarm symbol: To suggest a general safety concern.
ESD protection symbol: To suggest electrostatic-sensitive equipment.
Electric shock symbol: To suggest a danger of high voltage.

SafetyInformation
WARNING!
Installationandremovaloftheunitanditsaccessoriesmustbecarriedoutbyqualifiedpersonnel.You
mustreadalloftheSafetyInstructionssuppliedwithyourequipmentbeforeinstallationandoperation.

Warnings:
zIftheproductdoesnotworkproperly,pleasecontactyourdealerorthenearestservicecenter.Never
attempttodisassemblethecamerayourself.(Weshallnotassumeanyresponsibilityforproblems
causedbyunauthorizedrepairormaintenance.)
zToreducetheriskoffireorelectricalshock,donotexposethisproducttorainormoisture.

zThisinstallationshouldbemadebyaqualifiedservicepersonandshouldconformtoallthelocal
codes.
zPleaseinstallblackoutsequipmentintothepowersupplycircuitforconvenientsupplyinterruption.
zPleasemakesurethattheceilingcansupportmorethan50(N)Newtongravitiesifthecameraisfixed
totheceiling.
zMakesurethepowersupplyvoltageiscorrectbeforeusingthecamera.
zDonotdropthecameraorsubjectittophysicalshock.
zDonottouchsensormoduleswithfingers.Ifcleaningisnecessary,useacleanclothwithabitof
ethanolandwipeitgently.Ifthecamerawillnotbeusedforanextendedperiodoftime,putonthe
lenscaptoprotectthesensorfromdirt.
zDonotaimthecameralensatthestronglightsuchassunorincandescentlamp.Thestronglightcan
causefataldamagetothecamera.
zThesensormaybeburnedoutbyalaserbeam,sowhenanylaserequipmentisbeingused,makesure
thatthesurfaceofthesensornotbeexposedtothelaserbeam.
zToavoidheataccumulation,goodventilationisrequiredforaproperoperatingenvironment.
zKeepoutofwaterandanyliquid.
zWhileshipping,thecamerashouldbepackedinitsoriginalpacking.
zImproperuseorreplacementofthebatterymayresultinhazardofexplosion.Pleaseusethe
manufacturerrecommendedbatterytype.
Caution:Fiberopticports–opticalsafety.

Neverlookatthetransmitlaserwhilethepowerison.Neverlookdirectlyatthefiberportsandthefiber
cableendswhentheyarepoweredon.
Caution:Useofcontrolsoradjustmentstotheperformanceorproceduresotherthanthosespecified
hereinmayresultinhazardouslaseremissions.

RegulatoryCompliance
FCCPart15
Thisequipmenthasbeentestedandfoundtocomplywiththelimitsfordigitaldevice,pursuanttopart15
oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference
whentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,uses,andcan
radiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructionmanual,
maycauseharmfulinterferencetoradiocommunications.Operationofthisequipmentinaresidentialarea
islikelytocauseharmfulinterferenceinwhichcasetheuserwillberequiredtocorrecttheinterferenceat
hisownexpense.
ThisproductcomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
1. Thisdevicemaynotcauseharmfulinterference.

2. Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired
operation.
LVD/EMCDirective

ThisproductcomplieswiththeEuropeanLowVoltageDirective2006/95/ECandEMCDirective
2004/108/EC.
WEEEDirective–2002/96/EC
steElectrical&ElectronicEquipment(WEEE)
irectiveandmustbedisposedofinaresponsiblemanner.


TheproductthismanualreferstoiscoveredbytheWa
D


i
Contents
1BeforeYouStart∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙1
FrontView,Indicators,andButtons.....................................................................................................................1
FrontView.....................................................................................................................................................1
Indicators.......................................................................................................................................................1
Panelbuttons................................................................................................................................................3
UserLogin.............................................................................................................................................................5
Man‐MachineInterface........................................................................................................................................5
HowtoOperatetheMan‐MachineInterface.......................................................................................................6
HowtoOperatetheRemoteControl....................................................................................................................7
HowtoOperatetheMouse..................................................................................................................................8
2InitialConfiguration∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙9
BeforePower‐On..................................................................................................................................................9
Power‐onWizard..................................................................................................................................................9
AddingIPCs.........................................................................................................................................................15
AddingIPCsintheMannerofSearch..........................................................................................................16
AddingIPCsintheMannerofCustomization..............................................................................................19
DeletingIPCs................................................................................................................................................20
ConfiguringChannelParameters........................................................................................................................20
EnablinganAnalogChannel........................................................................................................................20
ConfiguringCameraParameters.................................................................................................................22
ConfiguringAudioandVideoParameters...................................................................................................26
ConfiguringEncodingParameters...............................................................................................................27
ConfiguringOSDParameters.......................................................................................................................28
ConfiguringROI...........................................................................................................................................32
3Preview∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙32
Man‐MachineInterfaceOutput..........................................................................................................................33
AutomaticDetection...................................................................................................................................33
ManualConfiguration..................................................................................................................................33
StatesonthePreviewInterface..........................................................................................................................34
PaneToolbaronthePreviewInterface..............................................................................................................35
Right‐ClickMenuonthePreviewInterface........................................................................................................36
ExampleofAuto‐SwitchOperation....................................................................................................................37
PreviewCapturing...............................................................................................................................................38
DigitalZoom........................................................................................................................................................39
ConfiguringPreviewParameters........................................................................................................................40
ConfiguringVirtualChannels..............................................................................................................................43
4PTZControl∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙44
ControllingaPTZCameraThroughthePTZToolbar...........................................................................................44
ConfiguringandCallingPresetPositions............................................................................................................47
ConfiguringandStartingPatrol...........................................................................................................................47
ConfiguringPatrolRoutesandPlans...........................................................................................................48
StartingPatrol..............................................................................................................................................51
ConfiguringPTZParameters...............................................................................................................................52

ii
5Recording∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙54
ManualRecording...............................................................................................................................................54
PlannedRecording..............................................................................................................................................55
Alarm‐TriggeredRecording.................................................................................................................................57
CheckingtheChannelRecordingState...............................................................................................................57
ConfiguringStorage............................................................................................................................................58
ConfiguringArrays.......................................................................................................................................58
ConfiguringStorageResources...................................................................................................................61
ConfiguringStoragePlans...........................................................................................................................62
DeletingStorageResources.........................................................................................................................63
6Playback∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙64
InstantPlayback..................................................................................................................................................64
VideoPlayback....................................................................................................................................................64
SynchronousPlayback.........................................................................................................................................65
CheckingVideoState..........................................................................................................................................66
BackplayToolbar.................................................................................................................................................67
PlaybackCapture................................................................................................................................................68
DigitalZoom........................................................................................................................................................68
7Backup∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙70
8Alarm∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙72
ConfiguringtheAlarmType................................................................................................................................72
BooleanAlarm.............................................................................................................................................72
MotionDetectionAlarm..............................................................................................................................74
OcclusionDetectionAlarm..........................................................................................................................77
VideoLossAlarm.........................................................................................................................................79
DeviceAlarm...............................................................................................................................................80
ConfiguringtheTriggeredAction........................................................................................................................81
Alarm‐TriggeredSound...............................................................................................................................81
Alarm‐triggeredEmail.................................................................................................................................82
Alarm‐triggeredBooleanOutput................................................................................................................83
Alarm‐TriggeredStorage.............................................................................................................................85
Alarm‐TriggeredAdjustmentofPTZtoaPresetPosition...........................................................................85
Alarm‐triggeredPreviewPane....................................................................................................................87
ConfiguringtheGuardPlan.................................................................................................................................88
9NetworkConfiguration∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙90
StaticAddress......................................................................................................................................................90
PPPoE..................................................................................................................................................................90
UNP.....................................................................................................................................................................91
EmailServer........................................................................................................................................................91
ConfiguringRoutes..............................................................................................................................................92
10SystemConfiguration∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙92
BasicConfiguration.............................................................................................................................................92
ConfiguringtheServer........................................................................................................................................94
ConfiguringNTP..................................................................................................................................................95
ConfiguringtheSerialPort..................................................................................................................................95
UserConfiguration..............................................................................................................................................97
AddingUsers................................................................................................................................................98
DeletingUsers.............................................................................................................................................98

iii
ModifyingUserInformation........................................................................................................................99
LockingorUnlockingUsers.......................................................................................................................100
LoggingOutUsersForcibly........................................................................................................................101
RefreshingtheUserList.............................................................................................................................101
ModifyingPasswords.................................................................................................................................102
11DeviceMaintenance∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙103
QueryingHistoryAlarms...................................................................................................................................103
UpgradingtheVersion......................................................................................................................................105
QueryingLogs....................................................................................................................................................106
SystemInformation...........................................................................................................................................107
SystemBackup..................................................................................................................................................108
RefreshingUSBStorageInformation.........................................................................................................109
CreatingaUSBFlashDriveFolder.............................................................................................................109
DeletingaUSBFlashDriveFileorFolder..................................................................................................110
ExportingtheSystemConfigurationandDatabase..................................................................................111
ExportingLogs...........................................................................................................................................112
ImportingtheSystemConfigurationandDatabase..................................................................................113
ImportingtheIPCConfigurationFile.........................................................................................................114
RestoringtheDefaultConfiguration.................................................................................................................115
ShuttingDowntheDevice................................................................................................................................116
12FAQ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙117
13Appendix–MenuStructure∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙118
14Appendix–Glossary∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙119

1
1BeforeYouStart
zBeforeyouperformanyman‐machineinterfaceoperations,ensurethatyouhavecorresponding
operationpermissions.Fordetails,refertoUserConfiguration.
zThefollowingfiguresareexemplaryonlyandmayvary,dependingonthemodel.
zTheparametersdisplayedingrayintheman‐machineinterfacecannotbemodified.Forthespecific
parametersthataregrayedout,seetheman‐machineinterface.
zFordevicesofdifferentmodels,thefunctionsmaybedifferent,sorefertotheactualdeviceforits
specificfunctions.
FrontView,Indicators,andButtons
FrontView
DVR300‐08E/16E/08S/16S‐IN


DVR300‐08L/16L‐IN


DVR200series



Indicators
Asshowninthefrontview,thefollowingtabledescribestheindicatorsonthefrontpanel.Theindicator
colormayvarywiththeequipmentmodel(blueorgreen).

2
Table1‐1StatusIndicators
IndicatorsColorStatusDescription

(Powerindicator)RedConstantlyonDevicepoweredon.
NET
(networkindicator)Blue/Green
ConstantlyonNetworkproperlyconnected.
OffNonetworkconnection.
PWR
(powerindicator)Blue/Green
ConstantlyonPowerconnected.
OffNopower.
IR
(remotecontrolindicator)Blue/Green
ConstantlyonDeviceisselectedandcanberemotely
controlled.
BlinkingDeviceisbeingverified.
OffDeviceisnotselectedandcannotbe
remotelycontrolled.
SHIFT
(reusebuttonindicator)Blue
ConstantlyonThereusebuttonbecomesafunctionkey.
BrieflyonAbuttonispressedandreleased.
OffThereusebuttonworksinnumberorletter
inputmode.
BrieflyoffAbuttonispressedandreleased.
RUN
(runningindicator)Blue/Green
ConstantlyonRunningnormally.
BlinkingStarting.
OffShutdown.
CODEC
(codecindicator)Blue/Green
ConstantlyonSignalinputwithoutcodingordecoding.
BlinkingBeingencodedordecoded.
OffNosignalinputorsystemshutdown.
ENC
(Encodeindicator)GreenBlinkingEncoding.
HD
(harddiskindicator)
Blue/Green
ConstantlyonRunningproperlywithoutdataaccess.
BlinkingRunningproperlywithdataaccess.
OffHarddiskisnotinstalledorthesystem
shutsdown,ortheindicatorturnsred.
Red
ConstantlyonHarddiskatfault.
BlinkingSeveralharddisksatfaultorarrayrebuilt.
HDERR RedConstantlyonHarddiskatfault.

3
IndicatorsColorStatusDescription
(harddiskfault)BlinkingArrayrebuilt.
OffHarddiskisnotinstalledorthesystem
shutsdown,oralldisksareworking
properly.
ALM
(alarmindicator)Red
ConstantlyonEquipmentalarms.
OffThesystemrunsnormallywithoutalarms.
SLOT
(Cardindicator)Green
ConstantlyonCardinslot.
BlinkingNocardinslot.
LINK
(Externaldeviceindicator)

Green

ConstantlyonDeviceconnected.
BlinkingDeviceunconnected.
ACT
(Datatransferindicator)YellowBlinkingDataisbeingtransferred.

Panelbuttons
Thepanelbuttonsmayvarywiththeequipmentmodel.
ItemFunctionandDescription
JOGSHUTTLEControlTurningthejogbuttonclockwiseisequivalenttopressingthedownkey;
turningthebuttoncounterclockwiseisequivalenttopressingtheupkey.
DIRECTION
z///:Movebetweendifferentmenuitems;shiftthefocus;in
PTZmode,movethePTZup,down,left,orrightafterthePTZtoolbar
ishidden.
z/:Inplaybackmode,rewindorforward30secondswhenthe
playbacktoolbarishidden.
z/:Inplaybackmode,rewindorforwardatspeedwhenthe
playbacktoolbarishidden.
OK
zConfirmtheoperation;
zInplaybackmode,playorpausewhentheplaybacktoolbarishidden.
USBinterface
USB2.0(limitedto1A)usedforconnectionwithanexternalUSBmouseor
storagedevice.
Note:
UseanotherdevicetopartitionandformataUSBstoragedeviceintoFAT32
filesystembeforeuse.
POWERON/OFF
zInSoftOFFmode,presstheON/OFFbuttontostartthedevice.
zInnormaloperationmode,presstheON/OFFbuttontoturnoffthe
device.HoldtheON/OFFbuttonforatleast3secondstoswitchoff
thedevice.

4
ItemFunctionandDescription
Function
Buttons
Alphanumeric
Buttons
zUsedtoenterapassword,number,orChineseorEnglishcharacters.
zThenumberkey0canbeusedtoselectorclearcheckboxesinthelist
box.
Note:Decimalpoint():UsedtoenteraChinesesymbol.
SPACEUsedtoenteraspaceinChineseinputmode.
DELUsedtoremovecharactersontheleftofthecursor.
F1Usedtoswitchbetweenfocusareasonaninterface.
F2
zUsedtoswitchbetweenmenusub‐tabs.
zUsedtocaptureimagesinthefocuspaneonthepreviewand
playbackinterface(withplaybacktoolbarhidden).
EDITUsedtoswitchbetweennumbers,ChineseandEnglish(upper/lower‐case)
characters.
LOGIN/OUTLoginoroutthedevice.
MENUUsedtoaccessthemainmenu.
RIGHTCLICKUsedtoaccesstheright‐clickcontextmenu.
TOOLBARUsedtoshoworhidethePTZorplaybacktoolbar.
SCREENSInpreviewandplaybackmode,usedtoswitchbetweendifferentscreens.
Screens3,5and7showvideosinthecorridor.
MAIN/AUX.
Usedtoswitchbetweenman‐machinescreensinpreviewmodeoronthe
firststartupwizardinterface.
Note:
InPTZcontrolmode,thebuttonisusedtoswitchbetweenscreenswhenthe
PTZtoolbarisshown.
SEQUENCEUsedtostart/stoppollingswitchinginpreviewmode.
BACKUPUsedtoenterthevideobackupinterfaceinpreviewmode.
PLAYBACKUsedtoenterthevideoplaybackinterfaceanddisplaytheplaybacktoolbar
inpreviewmode.
PTZUsedtoenterthePTZcontrolinterfaceanddisplaythePTZtoolbarin
previewmode.
RECUsedtomanuallystartorstopstoringimagesonaharddiskinpreview
mode.
PRESETUsedtosetthePTZintothepresetpositioninPTZcontrolmodewhenthe
PTZtoolbarishidden.
MUTEUsedtoturnon/offthemutefunction.
IRIS+/IRIS‐ UsedtoadjustthePTZcameraapertureinPTZcontrolmodewhenthePTZ
toolbarishidden.

5
ItemFunctionandDescription
FOCUS+/
FOCUS‐
UsedtoadjustthePTZcamerafocusinPTZcontrolmodewhenthePTZ
toolbarishidden.
ZOOM+/
ZOOM‐
UsedtoadjustthePTZcamerazoominPTZcontrolmodewhenthePTZ
toolbarishidden.
ESCUsedtoquitthecurrentinterface.
SHIFTUsedtoswitchbetweenreusefunctions.

UserLogin
NOTE！
zWhenloggingintotheman‐machineinterfaceforthefirsttime,usethedefaultusernameadminandthe
defaultpasswordadmin.
zBeforeperformingserviceoperations,ensurethatyouhavecorrespondingoperationpermissions.For
detailsaboutpermissionconfiguration,refertoUserConfiguration.

1. Right‐clickanywhereinthepreviewinterfaceandthenchooseMenu.Theuserlogindialogboxis
displayed.
2. Intheuserlogindialogbox,enterthecorrectusernameandpassword,andthenclickLogintologin
tothedevice.
Man‐MachineInterface
Figure1‐1showsanexampleoftheman‐machineinterfaceafteryouloginwithcorrespondingpermissions.
Ifyoudonothavethecorrespondingpermissions,certainmenusontheman‐machineinterfaceare
displayedingrayandunavailable.
Figure1‐1Man‐MachineInterface



6
HowtoOperatetheMan‐MachineInterface
Youcanquicklyconfiguretheman‐machineinterface,sothatthedeviceentersthenormalworkingstatus.
Fordetails,refertoInitialConfiguration.

NOTE！
zUnlessotherwisestated,alldeviceconfigurationandoperationsareperformedbyusingthemouseby
defaultinthismanual.Fordetailsabouthowtousethemouseandtheremotecontrol,refertoHowto
OperatetheMouseandHowtoOperatetheRemoteControl.Themethodforoperatingthebuttonson
thefrontpanelissimilartothemethodforoperatingtheremotecontrol.
zThesignalreceivingqualityoftheremotecontrolisthebestwithinadistanceof5meters,thehorizontal
anglewithinthereceivingsensitivityoftheremotecontrolrangesfrom–60°to+60°,andthevertical
anglewithinthereceivingsensitivityoftheremotecontrolrangesfrom–30°to+30°.


7
HowtoOperatetheRemoteControl
Functionsofthebuttonsontheremotecontrol
Figure1‐2FunctionsoftheButtonsontheRemoteControl
ButtonFunctionSchematicDiagram
POWERON/OFFPower‐on/‐offswitch.
Device
Pressthisbutton.Adevicecodecheckboxisdisplayed.Enter
theremotecontrolIDofthedevice.Afterthecheckis
successful,youcanenableallbuttonsontheremotecontrol.
Note:
Todisablethebuttonsontheremotecontrol,pressthisbutton
againafterthecheckissuccessfulandthenselectcanceling
thecheck.
Alphanumeric
Buttons
zSwitchtothecorrespondingchannelinLiveviewmode.
zInputnumbersandcharactersinEditmode.
zIntheChineseinputmethod,thenumeral"0"canbe
usedtorepresentaspace.
DELUsedtoremovecharactersontheleftofthecursor.
RIGHTCLICKUsedtoaccesstheright‐clickcontextmenu
SEQUENCEUsedtostart/stoppollingswitchinginpreviewmode
PLAYBACKUsedtoenterthevideoplaybackinterfaceanddisplaythe
playbacktoolbarinpreviewmode
MENUUsedtoturnon/offthemutefunction
TOOLBARUsedtoshoworhidethePTZorplaybacktoolbar
DIRECTION
z///:Movebetweendifferentmenuitems;shift
thefocus;inPTZmode,movethePTZup,down,left,or
rightafterthePTZtoolbarishidden.
z/:Inplaybackmode,rewindorforward30
secondswhentheplaybacktoolbarishidden.
z/:Inplaybackmode,rewindorforwardatspeed
whentheplaybacktoolbarishidden.
OK
zConfirmtheoperation;
zInplaybackmode,playorpausewhentheplaybacktool
barishidden.
PTZUsedtoenterthePTZcontrolinterfaceanddisplaythePTZ
toolbarinpreviewmode
ESCUsedtoquitthecurrentinterface
IRIS+/IRIS‐
InPTZcontrolstate,youcanadjusttheaperture,focus,and
zoomofthePTZcameralensafterhidingthePTZtoolbar.
FOCUS+/FOCUS‐
ZOOM+/ZOOM‐

8
ButtonFunctionSchematicDiagram
F1Usedtoswitchbetweenfocusareasonaninterface
F2
zUsedtoswitchbetweenmenusub‐tabs
zUsedtocaptureimagesinthefocuspaneonthepreview
andplaybackinterface(withplaybacktoolbarhidden)
Fullscreen
Inpreviewstate,pressthisbuttontodisplaytheselected
imageonafullscreen,orpressitagaintorestoretheimage
display.
SCREENS
Inpreviewandplaybackmode,usedtoswitchbetween
differentscreens.Screens3,5and7showvideosinthe
corridor.
MAIN/AUX.Reserved.
MUTETurnaudioon/off.

Howtooperatetheremotecontrol
1. Beforeoperatingtheremotecontrol,ensurethatitsbatterywithsufficientenergyhasbeencorrectly
installedintheremotecontrol.
2. Beforeoperatingtheremotecontrol,aimtheinfraredtransmittingendoftheremotecontrolatthe
infraredreceivingportofthedevice(indicatedbyanIRLEDonthefrontpanelofthedevice).Then
performoperationsontheremotecontrol.
Ifoperationscannotbeperformedontheremotecontrol,performthefollowingstep:
3. PressDeviceontheremotecontrol,entertheremotecontrolIDofthedevice,andthenpressOK.If
thedevicecanreceivethecommandfromtheremotecontrol,theIRLEDturnsgreenandnowyoucan
usetheremotecontroltooperatethedevice.

NOTE！
z255isaprivilegeddevicecodeforuseduringdevicecodecheck.Thatis,ifyouenter255duringthecheck,
thecheckwillbesuccessfulnomatterwhetherthedevicecodeismatched.
zInsoftpowered‐offstate,pressthePOWERON/OFFbuttonontheremotecontroltostartthedevice
afterthedevicepassesthedevicecodecheck.
zIfthedevicecannotreceiveinstructionsfromtheremotecontrolaftermultipleattempts,checkwhether
thefollowingproblemsexist:thepositiveandnegativepolaritiesofthebatteryareinverselyconnected;
thebatteryisrunningoutofenergy;anobstacleexistsbetweentheinfraredtransmittingendofthe
remotecontrolandtheinfraredreceivingportofthedevice;afluorescentlampusednearbyaffectsthe
remotecontrol.Iftheproblemsdonotexistbutthedevicestillcannotbeoperated,contactthelocal
distributor.

HowtoOperatetheMouse
Inthismanual,itisassumedthatusersareaccustomedtooperatingthemousewiththeirrighthand.

9
Table1‐2MouseOperations
NameActionDescription
Left
button
Click
zSelectorconfirmanoperationitem.
zSelectdigits,Chinesecharacters,symbols,orEnglishlettersinupperor
lowercasefromaneditboxtoeditthem.
Double‐click
zSwitchbetweenthesingle‐divisionviewandthemulti‐divisionviewin
previeworplaybackstate.
zPerformsomeoperationsonthetoolbar.Forexample,double‐clicka
certainiteminavideolisttoplaybackthisvideo.
Holdanddrag
zDrawormovearectangularbox.Forexample,setOSDoramaskarea.
zHoldthetitleofthetoolbartodragthetoolbar.
Right
buttonClick
zDisplayaright‐clickmenu.
zExittheelectroniczoom‐instate.
zWhenthereisaCancelorExitbuttononthecurrentinterface,youcan
right‐clickthebuttontoexittheinterface.
zInthepreviewstateoronthefirstinterfaceofthepower‐onwizard,hold
therightbuttonofthemouseforatleast3secondsandthenreleasethe
rightbuttontoswitchthedisplaysscreenoftheman‐machineinterface.
Fordetailsaboutthescreenswitchingsequence,refertoAutomatic
Detection.
Roller
RollupwardScrolloptionsupwardinanupward/downwardselectionbox,orscrollthe
interfaceupwardonascrollbar.
RolldownwardScrolloptionsdownwardinanupward/downwardselectionbox,orscrollthe
interfacedownwardonascrollbar.

2InitialConfiguration
BeforePower‐On
zEnsurethatatleastonemonitorisnormallyconnectedtothevideooutputinterfaceontherearpanel
ofthedevice;otherwise,theman‐machineinterfaceisinvisible.Fordetailsaboutthemodeof
displayingtheman‐machineinterfacethroughthevideooutputinterface,refertoMan‐Machine
InterfaceOutput.
zEnsurethattheharddiskhasbeencorrectlyinstalled.Fordetailsabouthowtoinstalltheharddisk,
refertothecorrespondingQuickGuide.
Power‐onWizard
Startthedeviceandwaitpatiently.Whenastartupprogressbarappearsonthemonitor,youcanenterthe
man‐machineinterface.

10
Youcanperformsimpleconfigurationaccordingtothepower‐onwizard,sothatthedeviceworksproperly.
Ifyoudonotwanttoperformquickconfigurationthroughthepower‐onwizard,youcandirectlyskipthe
power‐onwizardafterstartingthedevice,andthenloginastheadministratoradminandperformquick
configurationaccordingtosteps(3)to(5).
StepsScreenshot
1. Confirmwhethertostartthewizard
duringnextpower‐on,andthenclick
Next.
NOTE!
IfyoudonotselecttheStartwizardwhen
devicestartscheckbox,thepower‐onwizard
configurationinterfacedoesnotappearduring
nextstartup.Toenablethefunctionagain,you
needtosetthepower‐onwizard.Fordetails,
refertoBasicConfiguration.
2. Verifyyourpermission.
Enterthepassword(whichisadminbydefault)
oftheuseradmin,andthenclickNext.The
ConfigurationWizardinterfaceisdisplayed.

11
StepsScreenshot
3. Configurenetworkparameters.
1) ClickNetwork.
TheNetworkConfigurationinterfaceis
displayed.
2) OntheBasictabpage,double‐clickthe
networkinterfacecard(NIC)toconfigure
itsIPaddress,subnetmaskanddefault
gateway.Keepthedefaultsettingsofthe
restnetworkparametersunlessotherwise
stated.
3) ClickOKaftertheconfigurationis
complete.Systemserviceswillberestarted
duringtheconfigurationoftheNICeth0.
Aftertheservicesarerestarted,the
ConfigurationWizardinterfaceisreturned.

12
StepsScreenshot
4. Configuresystemparameters.
1) ClickConfiguration.
TheSystemConfigurationinterfaceis
displayed.
2) ClicktheServertab,andselectthe
managementmodeaccordingtoactual
networking.Keepthedefaultsettingsof
therestsystemparametersunless
otherwisestated.
3) ClickOKaftertheconfigurationis
complete.
Ifthemanagementmodeischanged,thedevice
willberestarted.
5. Configurestorageparameters.
ClickStorage.TheStorageConfiguration
interfaceisdisplayed.
1) Createanarray.
a. Click the Array tab. In the Build Array
area, enter the array name, and select the
array type and the idle slot.
b. Click Create.
The created array appears in an array list.

13
StepsScreenshot
2) Virtualizethearray.
Beforeanarrayisputintouse,itneedstobe
virtualized.Specifically,selectthe
correspondingarrayintheVirtualizationArray
area,andthenclickVirtualize.
NOTE!
Ittakesawhiletovirtualizeanarray.Wait
patiently.Afterthevirtualizationiscomplete,
theVirtualizedcolumnofthearrayisdisplayed
asYesinthearraylist.
3) Configurestorageresources.
ClicktheStoragetab,andconfigurestorage
resourceparameters.
Fordetailsaboutimportantparameters,
seeTable2‐1.