Zhejiang CDL1801 User manual

IMPORTANT: Read Before Using.
ZHEJIANG CHENGKANG MACHINERY &
ELECTRICAL PRODUCT
MANUFACTURING CO.,LTD
INSTRUCTION MANUAL
Cordless Impact Scre driver
CDL1801 CDL2101
1

SPECIFICATIONS Work area safety
CDL1801 CDL2101 1. Keep w rk area clean and well lit. Cluttered r
Machine
Screw dark areas invite accidents.
Standard
B lt 2. D n t perate p wer t ls in expl sive
atm spheres, such as in the presence f
flammable liquids, gases r dust. P wer t ls
create sparks which may ignite the dust r fumes.
3. Keep children and bystanders away while
perating a p wer t l. Distracti ns can cause
y u t l se c ntr l.
Electrical Safety
1.76 1.9 4. P wer t l plugs must match the utlet. Never
D.C 18V D.C 21.6V m dify the plug in any way. D n t use any
adapter plugs with earthed (gr unded) p wer
• Due t ur c ntinuing pr gramme f research and t ls. Unm dified plugs and matching utlets will
devel pment, the specificati ns herein are subject t reduce risk f electric sh ck.
change with ut n tice 5. Av id b dy c ntact with earthed r gr unded
with ut n tice. surfaces such as pipes, radiat rs, ranges and
• N te: Specificati ns may differ fr m c untry t refrigerat rs. There is an increased risk f
c untry. electric sh ck if y ur b dy is earthed r gr unded.
General Po er Tool Safety 6. D n t exp se p wer t ls t rain r wet
Warnings c nditi ns. Water entering a p wer t l will
WARNING Read all safety warnings and all increase the risk f electric sh ck.
instructi ns. Failure t f ll w the warnings and 7. D n t abuse the c rd. Never use the c rd f r
instructi ns may result in electric sh ck, fire and/ r carrying, pulling r unplugging the p wer t l.
seri us injury. Keep c rd away fr m heat, il, sharp edges r
m ving parts. Damaged r entangled c rds
Save all arnings and increase the risk f electric sh ck.
instructions for future reference. 8. When perating a p wer t l utd rs, use an
The term "p wer t l" in the warnings refers t y ur extensi n c rd suitable f r utd r use. Use f
mains- perated (c rded) p wer t l r battery- perated a c rd suitable f r utd r use reduces the risk f
(c rdless) p wer t l. electric sh ck.
9. If perating a p wer t l in a damp l cati n is
unav idable, use a gr und fault circuit
MODEL
Rated V ltage
Max.T rque (NM)
Baterry Capacity
Length（MM)
Charge time
Weight including
battery(KGS)
173
M4-M10
N l ad Speed(rpm)
Impacts per minute
M4-M16
0-2200
0-3200
180
1H
T lh lder 1/4"
Capacities
3.0AH
2

interrupter (GFCI) pr tected supply. Use f an Po er tool use and care
GFCI reduces the risk f electric sh ck. 17. D n t f rce the p wer t l. Use the c rrect
Personal Safety p wer t l f r y ur applicati n. The c rrect
10. Stay alert, watch what y u are d ing and use p wer t l will d the j b better and safer at the
c mm n sense when perating a p wer t l. rate f r which it was designed.
D n t use a p wer t l while y u are tired r 18. D n t use the p wer t l if the switch d es
under the influence f drugs, alc h l r n t turn it n and ff. Any p wer t l that cann t
medicati n. A m ment f inattenti n while be c ntr lled with the switch is danger us and
perating p wer t ls may result in seri us must be repaired.
pers nal injury. 19. Disc nnect the plug fr m the p wer s urce
11. Use pers nal pr tective equipment. Always and/ r the battery pack fr m the p wer t l
wear eye pr tecti n. Pr tective equipment such bef re making any adjustments, changing
as dust mask, n n-skid safety sh es, hard hat, r access ries, r st ring p wer t ls. Such
hearing pr tecti n used f r appr priate c nditi ns preventive safety measures reduce the risk f
will reduce pers nal injuries. starting the p wer t l accidentally.
12. Prevent unintenti nal starting. Ensure the 20. St re idle p wer t ls ut f the reach f
switch is in the ff-p siti n bef re c nnecting children and d n t all w pers ns unfamiliar
t p wer s urce and/ r battery pack, picking with the p wer t l r these instructi ns t
up r carrying the t l. Carrying p wer t ls with perate the p wer t l. P wer t ls are
y ur finger n the switch r energising p wer t ls danger us in the hands f untrained users.
that have the switch n invites accidents. 21. Maintain p wer t ls. Check f r misalignment
13. Rem ve any adjusting key r wrench bef re r binding f m ving parts, breakage f parts
turning the p wer t l n. A wrench r a key left and any ther c nditi n that may affect the
attached t a r tating part f the p wer t l may p wer t l’s perati n. If damaged, have the
result in pers nal injury. p wer t l repaired bef re use. Many accidents
14. D n t verreach. Keep pr per f ting and are caused by p rly maintained p wer t ls.
balance at all times. This enables better c ntr l 22. Keep cutting t ls sharp and clean. Pr perly
f the p wer t l in unexpected situati ns. maintained cutting t ls with sharp cutting edges
15. Dress pr perly. D n t wear l se cl thing r are less likely t bind and are easier t c ntr l.
jewellery. Keep y ur hair, cl thing, and gl ves 23. Use the p wer t l, access ries and t l bits
away fr m m ving parts. L se cl thes, etc. in acc rdance with these instructi ns,
jewellery r l ng hair can be caught in m ving taking int acc unt the w rking c nditi ns
parts. and the w rk t be perf rmed. Use f the p wer
16. If devices are pr vided f r the c nnecti n f t l f r perati ns different fr m th se intended
dust extracti n and c llecti n facilities, c uld result in a hazard us situati n.
ensure these are c nnected and pr perly used. Battery tool use and care
Use f dust c llecti n can reduce dust-related 24. Recharge nly with the charger specified by
hazards. the manufacturer. A charger that is suitable f r
3

ne type f battery pack may create a risk f fire 3. H ld p wer t l by insulated gripping
when used with an ther battery pack. surfaces, when perf rming an perati n
25. Use p wer t ls nly with specifically where the fastener may c ntact hidden wiring
designated battery packs. Use f any ther r its wn c rd. Fasteners c ntacting a "live" wire
battery packs may create a risk f injury and fire. may make exp sed metal parts f the p wer t l
26. When battery pack is n t in use, keep it away live and c uld give the perat r an electric
fr m ther metal bjects, like paper clips, sh ck.
c ins, keys, nails, screws r ther small metal 4. Always be sure y u have a firm f ting.
bjects, that can make a c nnecti n fr m ne Be sure n ne is bel w when using the t l in
terminal t an ther. Sh rting the battery high l cati ns.
terminals t gether may cause burns r a fire. 5. H ld the t l firmly.
27. Under abusive c nditi ns, liquid may be 6. Keep hands away fr m r tating parts.
ejected fr m the battery; av id c ntact. If 7. D n t leave the t l running. Operate the t l
c ntact accidentally ccurs, flush with water. nly when hand-held.
If liquid c ntacts eyes, additi nally seek 8. D n t t uch the drill bit r the w rkpiece
medical help. Liquid ejected fr m the battery may immediately after perati n; they may be
cause irritati n r burns. extremely h t and c uld burn y ur skin.
Service 9. S me material c ntains chemicals which may
28. Have y ur p wer t l serviced by a qualified be t xic. Take cauti n t prevent dust
repair pers n using nly identical replacement inhalati n and skin c ntact. F ll w material
parts. This will ensure that the safety f the p wer supplier safety data.
t l is maintained.
29. F ll w instructi n f r lubricating and SAVE THESE INSTRUCTIONS.
changing access ries. WARNING:
30. Keep handles dry, clean and free fr m il and DO NOT let c mf rt r familiarity with pr duct
grease. (gained fr m repeated use) replace strict adherence
CORDLESS DRILL SAFETY t safety rules f r the subject pr duct. MISUSE r
WARNINGS failure t f ll w the safety rules stated in this
1. Use auxiliary handles supplied with the t l. instructi n manual may cause seri us pers nal
L ss f c ntr l can cause pers nal injury. (if injury.
supplied)
2. H ld p wer t ls by insulated gripping IMPORTANT SAFETY
surfaces when perf rming an perati n where INSTRUCTIONS
the cutting t l may c ntact hidden wiring r FOR BATTERY CARTRIDGE
its wn c rd. C ntact with a "live" wire will make 1. Bef re using battery cartridge, read all
exp sed metal parts f the t l "live" and sh ck instructi ns and cauti nary markings n (1)
the perat r. battery charger, (2) battery, and (3) pr duct
using battery.
4

2. D n t disassemble battery cartridge.
3. If perating time has bec me excessively FUNCTIONAL DESCRIPTION
sh rter, st p perating immediately. It may CAUTION:
result in a risk f verheating, p ssible burns • Always be sure that the t l is switched ff and the
and even an expl si n. battery cartridge is rem ved bef re adjusting r
4. If electr lyte gets int y ur eyes, rinse them checking functi n n the t l.
ut with clear water and seek medical Installing or removing battery cartridge
attenti n right away. It may result in l ss f
y ur eyesight.
5. D n t sh rt the battery cartridge:
(1) D n t t uch the terminals with any
c nductive material.
(2) Av id st ring battery cartridge in a
c ntainer with ther metal bjects such as
nails, c ins, etc.
(3) D n t exp se battery cartridge t water r rain. • Always switch ff the t l bef re installati n r
A battery sh rt can cause a large current rem val f the battery cartridge.
fl w, verheating, p ssible burns and • T rem ve the battery cartridge, withdraw it fr m
even a breakd wn. the t l while sliding the butt n n the fr nt f the
6. D n t st re the t l and battery cartridge in cartridge.
l cati ns where the temperature may reach r • T insert the battery cartridge, align the t ngue n
exceed 50 ﾟC (122 ﾟF). the battery cartridge with the gr ve in the h using
7. D n t incinerate the battery cartridge even if and slip it int place. Always insert it all the way
it is severely damaged r is c mpletely w rn until it l cks in place with a little click.
ut. The battery cartridge can expl de in a fire. • D n t use f rce when inserting the battery
8. Be careful n t t dr p r strike battery. cartridge. If the cartridge d es n t slide in easily, it
9. D n t use a damaged battery. is n t being inserted c rrectly.
S itch action
SAVE THESE INSTRUCTIONS.
Tips f r maintaining maximum battery life
1. Charge the battery cartridge bef re
c mpletely discharged.
Always st p t l perati n and charge the
battery cartridge when y u n tice less t l p wer
2. Never recharge a fully charged battery cartridge.
Overcharging sh rtens the battery service life. CAUTION:
3. Charge the battery cartridge with r m • Bef re inserting the battery cartridge int the t l,
temperature at 10 ﾟC - 40 ﾟC (50 ﾟF - 104 ﾟF). always check t see that the switch trigger
Let a h t battery cartridge c l d wn bef re actuates pr perly and returns t the "OFF" p siti n
charging it. when released.
1. Butt n
2. Battery cartridge
1. Switch trigger
5

T start the t l, simply pull the switch trigger. T l CAUTION:
speed is increased by increasing pressure n the • Always check the directi n f r tati n bef re
switch trigger. Release the switch trigger t st p. perati n.
Lighting up the front lamp • Use the reversing switch nly after the t l c mes
t a c mplete st p. Changing the directi n f
1. Lamp r tati n bef re the t l st ps may damage the t l.
• When n t perating the t l, always set the
reversing switch lever t the neutral p siti n.
ASSEMBLY
CAUTION:
• Always be sure that the t l is switched ff and the
battery cartridge is rem ved bef re carrying ut
any w rk n the t l.
CAUTION: Installing or removing driver bit or socket bit
• D n t l k in the light r see the s urce f light
directly.
Pull the switch trigger t light up the lamp. The lamp
keeps n lighting while the switch trigger is being pulled.
NOTE:
• Use a dry cl th t wipe the dirt ff the lens f lamp.
Be careful n t t scratch the lens f lamp, r it may Use nly the driver bit r s cket bit sh wn in the figure.
l wer the illuminati n. D n t use any ther driver bit r s cket bit.
Reversing s itch action T install the bit, pull the sleeve in the directi n f the
arr w and insert the bit int the sleeve as far as it will g .
Then release the sleeve t secure the bit.
This t l has a reversing switch t change the directi n
f r tati n. Depress the reversing switch lever fr m 1. Bit
the A side f r cl ckwise r tati n r fr m the B side f r 2. Sleeve
c untercl ckwise r tati n. T rem ve the bit, pull the sleeve in the directi n f the
When the reversing switch lever is in the neutral arr w and pull the bit ut firmly.
p siti n,the switch trigger cann t be pulled.
6

NOTE:
• If the bit is n t inserted deep en ugh int the
sleeve, the sleeve will n t return t its riginal
p siti n and the bit will n t be secured. In this case,
try re-inserting the bit acc rding t the instructi ns
ab ve.
OPERATION
The pr per fastening t rque may differ depending up n
the kind r size f the screw/b lt, the material f the
w rkpiece t be fastened, etc. The relati n between
fastening t rque and fastening time is sh wn in the
figures
H ld the t l firmly and place the p int f the driver bit in
the screw head. Apply f rward pressure t the t l t the
extent that the bit will n t slip ff the screw and turn the
t l n t start perati n.
NOTE:
• Use the pr per bit f r the head f the screw/b lt
that y u wish t use.
• When fastening screw M8 r smaller, carefully
adjust pressure n the switch trigger s that the
screw is n t damaged.
• H ld the t l p inted straight at the screw.
• If y u tighten the screw f r a time l nger than
sh wn in the figures, the screw r the p int f the
driver bit may be verstressed, stripped, damaged,
etc. Bef re starting y ur j b, always perf rm a test
perati n t determine the pr per fastening time f r
y ur screw.
The fastening t rque is affected by a wide variety f
fact rs including the f ll wing. After fastening, always
check the t rque with a t rque wrench.
1. When the battery cartridge is discharged alm st
c mpletely, v ltage will dr p and the fastening
t rque will be reduced.
7

2. Driver bit r s cket bit
Failure t use the c rrect size driver bit r s cket bit
will cause a reducti n in the fastening t rque.
3. B lt
• Even th ugh the t rque c efficient and the
class f b lt are the same, the pr per fastening
t rque will differ acc rding t the diameter f
b lt.
• Even th ugh the diameters f b lts are the
same, the pr per fastening t rque will differ
acc rding t the t rque c efficient, the class f
b lt and the b lt length.
4. The manner f h lding the t l r the material f
driving p siti n t be fastened will affect the t rque.
5. Operating the t l at l w speed will cause a reducti n
in the fastening t rque.
ACCESSORIES
CAUTION:
• These access ries r attachments are
rec mmended f r use with y ur CHENGKANG t l
specified in this manual. The use f any ther
access ries r attachments might present a risk f
injury t pers ns. Only use access ry r
attachment f r its stated purp se.
If y u need any assistance f r m re details regarding
these access ries, ask y ur l cal service center.
• Screw bits
• Plastic carrying case
• Vari us type f CHENGKANG batteries and
chargers
8

9