Zip IP-CAM852 User manual

© 2023 System Q Ltd
IP-CAM852
Instruction Manual
ZipNVR.com

IP-CAM852
I
© 2023 System Q Ltd
ZipDVR.com
Table of Contents
Part 1 Introduction 1
1 Key Features - IP-CAM852W ........................................................................................... 1
2 Essential Tools and ZipFinder ......................................................................................... 1
Part 2 Connections and Dimensions 2
1 IP-CAM852W ................................................................................................................... 2
Part 3 Mounting and SD Card Installation 3
1 Eyeball ........................................................................................................................... 4
Part 4 Setup Options 5
1 PoE ZIP NVR ................................................................................................................... 5
2 Non-PoE ZIP NVR ............................................................................................................ 6
Part 5 How to Login via Browser 7
Part 6 Browser Menu Settings 9
1 IP-CAM852W ................................................................................................................... 9
Part 7 Extra Resources 14
1 ZipNVR.com Website .................................................................................................... 14
2 Adding IP Cameras to a ZIP recorder ........................................................................... 14
3 AI Setup ........................................................................................................................ 14
4 ZIP Firmware ................................................................................................................ 15
Part 8 General Maintenance 16
Part 9 Specifications 17
1 IP-CAM852W ................................................................................................................. 17
Part 10 Conditions 18
Index 19

© 2023 System Q Ltd
1
Index
ZipDVR.com
Introduction
1.1 Key Features - IP-CAM852W
The IP-CAM852W is a eyeball style camera designed for the more budget conscious
IP systems. The eyeball supports motion detection and has a tough metal exterior,
ideal for both outdoor and indoor uses. Up to 45m IR range (true day/night filter),
2MP resolution, built in PoE, H265 and H264 codec.
· PoE & 12V
· SD card slot
· Micro SD Card Slot
· Audio In - Audio Out
· 2.8-12mm Manual Vari-focal lens
· 2MP
· IR
· Perfect for ZIP NVR Kits
1.2 Essential Tools and ZipFinder
To install this product you will need:
· Laptop / Windows PC
· Screwdriver
· Drill
· Hammer
· ZIP NVR or DVR
· PoE Switch / 12V DC power supply
· Ethernet CAT5/5e/6 Cable
ZipFinder - IP Camera Configuration Tool
ZipFinder is a Windows PC software for
discovering
and configuring IP cameras a network.
Use ZipFinder on non-PoE installs, to help problem
solving issues such as forgotten or unknown
IP Addresses.
To download visit ZipNVR.com

09/05/2023
2
IP-CAM852
ZipDVR.com
Connections and Dimensions
2.1 IP-CAM852W
Powering the camera
Option 1 - Power the camera from 12V DC (via the 2.1mm DC Socket), the current
consumption is 750mA.
The camera is polarity sensitive so connections must be correctly made.
Option 2 - Power the camera using a PoE 48V RJ45 Socket
When connecting ZIP PoE NVR plug the camera directly into the NVRs built in PoE
switch.
The camera should automatically become visible after being connected for
approximately 1 minute.

© 2023 System Q Ltd
3
Index
ZipDVR.com
Dimensions
*Dimensions Exclude Bracket
Mounting and SD Card Installation
For local recording on the camera itself an SD card must be installed.
Recording time will vary dependent upon: SD card size and encoding settings
32GB SD Card 31 hours
64GB SD Card 62 hours
128GB SD Card (MAX) 124 hours
256GB SD Card (MAX) 248 hours
The camera can be set to only record when triggered via motion detection, alarm
input or AIsmart, this maximises the recording time achievable.
Remove power from the camera when inserting / removing the SD card.

09/05/2023
4
IP-CAM852
ZipDVR.com
3.1 Eyeball
A template is provided in the box for marking the hole positions for the fixing screws.

© 2023 System Q Ltd
5
Index
ZipDVR.com
Setup Options
4.1 PoE ZIP NVR
When connecting to a ZIP PoE NVR plug the camera directly into the NVR's built in
PoE switch.
The camera should automatically become visible after being connected for
approximately 1 minute.
The 100m distance for a camera can be increased when the PoE Mode is set to
EPoE.
In the menu on a ZIP PoE NVR go to:-
Video > IP Channels > PoE Mode

09/05/2023
6
IP-CAM852
ZipDVR.com
4.2 Non-PoE ZIP NVR
When connecting cameras to a Non-PoE NVR, they are first connected to an
external network switch which is in-turn connected to the NVR as shown below.
See Extra Resources for more information on Adding IP Cameras manually to
a ZIP Recorder.
14

© 2023 System Q Ltd
7
Index
ZipDVR.com
How to Login via Browser
The AIsmart features can be configured in a ZIP recorder or directly in the browser
interface of the camera (standalone)
Only one smart detection feature can be enabled at any given time.
See the NVR or DVR manual for information on configuring these features
with a ZIP recorder.
Follow the steps below for configuring the settings directly in the camera via a
browser for standalone setup.
You will need...
· Windows Based PC/ Laptop connected to router/ PoE switch
· ZipVision Pro App on Mobile Device
· PoE Switch connected to Network/ Router
· Ethernet network cable
· ZipFinder software, available via this link below:-
www.softcctv.com/store/Item/Zip-Finder-IP-CCTV-Security-Camera-Discovery-Tool
NOTE If the PC being used is on a different IP range to the PC then add the IP range
of the camera to the PC using the below guide:-
PDF Version :- http://www.cctvmanuals.com/pdf/tips/How_to_add_an_IP_Range.pdf
HTML Version :-
http://www.cctvmanuals.com/tips/How_to_add_an_IP_Range/index.html
1. Plug the camera's RJ45 port with a network cable into a PoE switch

09/05/2023
8
IP-CAM852
ZipDVR.com
2. Using ZipFinder on a Windows Based PC/ Laptop Search and then tick the
camera
3. Select Net Mode = DCHP, then click Modify
4. Search again, to get the updated IP address.
5. Select the IP address of the camera, Internet Explorer will pop-up, and ask to
download and install the plug-in.
6. Download, install and follow the steps for the plug-in installation, then re-load the
browser by selecting the IP address again.
5. Login to the IP Camera, the default login details are:-
Default IP
192.168.10.1
DCHP
Off
User Name
admin
Password
777777