Zip Rapid Deploy SEE010 User manual
Rapid Deploy Manual
I
© 2021 System Q Ltd
ZipNVR.com
Table of Contents
Part 1 Introduction to the Rapid Deploy Range 1
1 Key Features .................................................................................................................. 1
2 Required Tools/ Handy Extras ....................................................................................... 2
Part 2 Connections & Wiring 3
1 Overview ........................................................................................................................ 3
2 Cameras ......................................................................................................................... 4
3 Batteries ......................................................................................................................... 5
4 Receiver ......................................................................................................................... 5
Part 3 Powering & Charging 6
Part 4 Setup Considerations 6
1 POE NVR Channel Setup ................................................................................................ 6
2 DVR Channel Setup ........................................................................................................ 8
3 Pairing ............................................................................................................................ 9
4 Constant Recording ...................................................................................................... 11
Part 5 Mounting 13
Part 6 Troubleshooting 14
1 Problem - The receiver is connected but nothing shows in USB Wireless .................... 14
2 Problem - The battery is draining too quickly in the camera ........................................ 14
3 Problem - The video and audio from the camera is slow and the images are stuttery..... 14
Part 7 General Maintenance 15
Part 8 Specification 15
Part 9 Conditions 15
1 General Company Disclaimer ....................................................................................... 16
2 WEEE Declaration ......................................................................................................... 16
3 Copyright ...................................................................................................................... 16
Index 17
Introduction to the Rapid Deploy Range
© 2021 System Q Ltd
1
ZipNVR.com
1 Introduction to the Rapid Deploy Range
The Rapid Deploy cameras are a great way to quickly fit and secure a customer’s
premises. Without having to route wires back to a DVR.
1.1 Key Features
No cabling required
Using wireless Zip technology and a built in battery for power they need no cabling, just
place the cameras where you need to get the best angle of view and that's it.
Long Battery Life
Up to 2 years standby and typically 1-2 weeks of moderate use - (works only when PIR
detects movement)
Long Transmission Range - up to 200M
Working on the same frequencies as traditional WiFi, similar transmission distances can
expect to be achieved. Read our Tip 482 for how to achieve the best results.
Zip NVR & DVR compatible
Once mounted the cameras can be set up in the Zip DVR or NVR to enable handy
features such as 2-way audio and the built in PIR function that can be used to activate
recordings.
Rapid Deploy - Fast to fit
The new Zip range of rapid deploy cameras are a great add-on to your Zip DVR or NVR
CCTV system as no cabling means they take only a minute to fit.
WiFi style Transmission
These cameras transmit directly to the Rapid Deploy Receiver (SEE020) that plugs
directly into the USB of your compatible Zip DVR or NVR so they require no real
programming.
NB. They are not designed to transmit to a standard WiFi access point.
2.8mm Wide Angle 2MP Cameras
A wide angle lens allows maximum coverage of a room or an area and the camera's
handy brackets give lots of viewing options once wall mounted.
Built in IR (up to 8M)
On-board IR LEDs means the cameras can see in the dark, ideal if they are being used on
a mobile site to catch fly tippers or in the home if you're watching your child or pets
sleeping and prefer not to leave the lights switched on.
Built-in Microphone & Speaker for 2-way audio
A great way to "talk back" to an area you are recording – perfect for warning off an intruder.
© 2021 System Q Ltd
Rapid Deploy Manual
2ZipNVR.com
Built-in PIR (up to 10M) for alarm inputs
Built in to the compact camera this helps to save battery life by activating the camera into
wake up mode to transmit only when you need it.
4 Rapid Deploy Cameras per Receiver
Up to 4 of these camera units can transmit wirelessly to a mini receiver that simply plugs
in to the back of your Zip NVR or DVR using a standard USB lead.
Black or White Compact Camera Design
Measuring just 14x9cm and available in 2 finishes either white (plastic) or gloss black
metal, they can even be fitted outdoors and provide a great solution for a temporary or
mobile set up.
Rechargeable Battery Packs
Spare packs make it easy to hot swap the batteries on these Rapid Deploy cameras so
you can remove the existing pack and simply recharge it with a normal Micro (B) USB
charger.
1.2 Required Tools / Handy Extras
·
Screwdriver
·
Drill
·
Hammer
Connections & Wiring
© 2021 System Q Ltd
3
ZipNVR.com
2 Connections & Wiring
The Rapid Deploy equipment consists of 3 main parts:
·
Rapid Deploy Camera
·
Rapid Deploy Receiver
·
A compatible Zip DVR or NVR
2.1 Overview
·
Up to 4 Rapid Deploy Cameras with 1 Receiver
·
1 Rapid Deploy Receiver can be used per Zip DVR or Zip NVR
·
The Rapid Deploy cameras use the IP channels when connected to Zip DVRs. This
means you can add 4 Rapid Deploy cameras to 8Ch and 16Ch DVRs or 2 Rapid Deploy
cameras to a 4Ch Zip DVR.
·
The Rapid Deploy Receiver plugs directly into the USB of your compatible Zip DVR or
NVR
© 2021 System Q Ltd
Rapid Deploy Manual
4ZipNVR.com
2.2 Cameras
When the PIR is activated then the camera is activated and transmits data to the receiver.
It works by measuring the Infra Red (IR) light radiating from an object such as a human
being in its field of view and detecting the subsequent radiant heat emitted.
At night time the light sensor is used to determine if the Infra-Red LEDs are also activated
when the camera is activated by the PIR.
Two-way talk back can also be used when the camera is activated, using the Microphone
on the front of the camera and the Built-in speaker.
Connections & Wiring
© 2021 System Q Ltd
5
ZipNVR.com
2.3 Batteries
Spare packs make it easy to hot swap the batteries on these Rapid Deploy cameras so
you can remove the existing pack and simply recharge it with a normal Micro (B) USB
charger.
Battery Life from 20 hrs in continuous mode to nearly 2 and a half years in constant
standby mode. Battery pack are rechargeable using a standard micro USB B type lead.
2.4 Receiver
Rapid Deploy Receiver (SEE020) that plugs directly into the USB of your compatible Zip
DVR or NVR.
Once plugged in you will see a green Status LED.
© 2021 System Q Ltd
Rapid Deploy Manual
6ZipNVR.com
3 Powering & Charging
Before attempting Setup ensure the Rapid Deploy Camera has the battery inserted fully
and has been charged.
Status LED:-
Red = Charging
Green = Charged (and plugged in)
No Light = Not Charging
Micro (B) USB charger is required for the charging and powering of the Rapid Deploy
Batteries.
Micro (B) USB charger and lead are not supplied.
4 Setup Considerations
Before attempting Setup ensure the Rapid Deploy Camera has the battery inserted fully
and has been charged .
The receiver needs to be connected via USB to the recorder before pairing .
The firmware required for the DVR and NVR is version 8 onwards.
4.1 POE NVR Channel Setup
For PoE ZIP NVRs, the channel configuration for IP Channels need altering before setting
up the USB wireless channels.
Go to the menu of the DVR
Video > IP Channels
Switch Mode >
Set to
Manual Mode
6
6
3 9
© 2021 System Q Ltd
Rapid Deploy Manual
8ZipNVR.com
4.2 DVR Channel Setup
The channels needs configuring for the Rapid Deploy Receiver and Cameras.
Go to the menu of the DVR
Video > Channel Config
On the last 4 cameras
(2 on a 4Ch DVR)
in the
DVR channel list >
Select
USB Wireless
Select
Apply
The DVR will require a reboot once applied, click
OK
Setup Considerations
© 2021 System Q Ltd
9
ZipNVR.com
4.3 Pairing
When the channels have been set then the Rapid Deploy Cameras need pairing with the
Receiver.
Pairing can only be done in the menu on the recorder.
Go to the menu of the DVR
Video > USB Wireless
Click
Pair
to start the pairing mode with the Receiver
Select the
Pair
button on the rear of the Rapid Deploy Camera
Setup Considerations
© 2021 System Q Ltd
11
ZipNVR.com
4.4 Constant Recording
The
Post Recording
can be adjusted for how long the DVR records for after the PIR has
been activated.
Once set, Click
Apply
Once the Battery is fully charged then the camera can be set to continuous recording.
Once set, Click
Apply
6
Mounting
© 2021 System Q Ltd
13
ZipNVR.com
5 Mounting
The Rapid Deploy cameras are supplied with an simple mounting plate for quick and easy
installation. To mount the camera just follow the steps below:
1. Fix the mounting plate to the mounting surface using the screws and plugs provided.
2. Slot the camera onto the mounting plate from above.
© 2021 System Q Ltd
Rapid Deploy Manual
14 ZipNVR.com
3. Finally secure the camera with the small locking screw.
6 Troubleshooting
6.1 Problem - The receiver is connected but nothing shows
in USB Wireless
Solution(s):
1. The camera channels need to be altered to USB Wireless before attempting to pair,
please go to channel setup .
6.2 Problem - The battery is draining too quickly in the
camera
Solution(s):
1. Ensure the battery is fully charged before setting up with the camera.
2. The camera is activated by the PIR built into the front of the camera, if this is constantly
activated then this will drain the battery.
6.3 Problem - The video and audio from the camera is slow
and the images are stuttery
Solution(s):
1. The cameras and receiver work on a similar wireless range to standard Wi-Fi router
and access points. If the receiver or the cameras are near to one of these devices then
this could interfere with the signal and reduce the working transmission range.
2. Wi-Fi is also affected by solid objects like internal walls, insulation and bricks, avoid
transmission through solid objects as this will also affect the distance and signal
strength.
8
6
General Maintenance
© 2021 System Q Ltd
15
ZipNVR.com
7 General Maintenance
·
Ensure that nothing is obscuring the field of view, position the camera to ensure the PIR
and Lens can see clearly.
·
Routinely clean the camera to prevent dust build up as this can effect the performance
of the camera. We recommend a damp non-abrasive microfibre cloth.
·
Check that the cameras are firmly attached to the post or wall.
·
Check playback in the recorder to ensure the camera is triggering properly when
activated.
8 Specification
Feature
Specification
Lens Type
2.8mm Fixed Lens
Viewing Angle
120 Degrees
Resolution
HD 1080P / 2MP
Audio
2-Way Built-in
Audio Input
Built-in Microphone
Audio Output
Built-in Speaker
PIR
Built-in 10m Range
InfraRed LEDs
6
IR Range
8m
Min. Illumination
0 Lux with LEDs on
Noise Reduction
3D
White Balance
Auto
Input Voltage
DC 4.2V +-10%
Current Consumption
420mA (Activate) / 400mA (Sleep)
Power Connection
Battery Pack - 2900mAh/ea Capacity
Finish
White
Build
Plastic
Operating
Temperature
From -20 to 55 deg C
Bracket
Supplied
Dimensions
(H) 136 x (W) 73mm x (D) 89mm
9Conditions
© 2021 System Q Ltd
Rapid Deploy Manual
16 ZipNVR.com
9.1 General Company Disclaimer
All specifications are approximate. System Q Ltd reserves the right to change any
product specifications or features without notice. Whilst every effort is made to ensure that
these instructions are complete and accurate, System Q Ltd cannot be held responsible
in any way for any losses, no matter how they arise, from errors or omissions in these
instructions, or the performance or non-performance of the equipment that these
instructions refer to.
9.2 WEEE Declaration
This symbol on the products and/or accompanying documents means that used
electronic equipment must not be mixed with general household waste. For treatment,
recovery and recycling please return this unit to your trade supplier or local designated
WEE/CG0783SS collection point as defined by your local council.
9.3 Copyright
© Copyright 2021
Zip is a registered trademark of System Q Ltd, Chesterfield. Derbyshire. S40 2WB
Index
© 2021 System Q Ltd
17
ZipNVR.com
Index
- A -
Audio 14
- B -
Battery 1, 5, 6
Battery Life 14
- C -
Camera Receiver 5
Cameras 4
Channel 6, 8
Charging 6
Cleaning 15
Connections 3, 4
Constant 11
Continuous 11
Copyright 16
Current 6
- D -
Declaration 16
Disclamer 16
DVR 8, 11
- F -
Fault Finding 14
Features 1, 4
Firmware 6
- G -
General Disclaimer 16
- I -
Installing 13
Introduction 1
IR 1
- M -
Maintenance 15
Menu 8, 9, 11
Micro USB Socket 6
Microphone 1
Mounting 13
- N -
NVR 6
- O -
Overview 3
- P -
Pairing 6, 9
PIR 1
PoE 6
Power 6
Powering 6
- R -
Receiver 1, 3, 5, 6, 9, 14
Rechargeable Battery 5
Recharging 6
Recording 11
- S -
Setup 3, 6, 8, 9, 11
Spare Battery 5
Speaker 1
Specification 15
Supply 6
Switch 6
- T -
Technical Specification 15
Transmission 1
Troubleshooting 14
This manual suits for next models
1
Table of contents
Other Zip Security Camera manuals
Popular Security Camera manuals by other brands
KT&C
KT&C HDX131M Operation manual
Dahua
Dahua 1206761 installation manual
Dahua Technology
Dahua Technology IPC-PDB4830-B360 quick start guide
TRENDnet
TRENDnet TV-IP340PI Quick installation guide
American Dynamics
American Dynamics ADCI625-P221 Configuration and user's guide
Ganz
Ganz ZN-PTZ550VP(N)E installation manual
