Zip SEE895 User manual

5MP Eyeball 2.8-12mm Motorised Lens Camera
SEE895
ZipDVR.com
© 2021 System Q Ltd

xSEE615
I
© 2021 System Q Ltd
ZipNVR.com
Table of Contents
Part 1 Introduction 1
1 SEE895 ............................................................................................................................ 1
Part 2 Tools & Handy Extras 1
Part 3 Connections 2
Part 4 4-In-1 Technology 2
Part 5 Mounting 3
1 Eyeball ........................................................................................................................... 3
Part 6 Motorised Lens 4
Part 7 OSD Menu 5
1 5MP OSD Menu ............................................................................................................... 6
2 Key Menu Settings.......................................................................................................... 8
Part 8 Troubleshooting 9
1 Camera Rebooting / Turning Off ..................................................................................... 9
2 Poor Quality Images ....................................................................................................... 9
3 Image is Black & White .................................................................................................. 9
4 NCD / No Image Displayed on Recorder ......................................................................... 9
Part 9 General Maintenance 11
Part 10 Specification 12
1 SEE895 .......................................................................................................................... 12
Part 11 Conditions 13
1 General Company Disclaimer ....................................................................................... 13
2 WEEE Declaration ......................................................................................................... 13
3 Copyright ...................................................................................................................... 13
Index 14

Introduction
1
© 2021 System Q Ltd
ZipNVR.com
1 Introduction
1.1 SEE895
The SEE895 has a motorised lens so that you canset the zoomand focus fromthe DVR. With
4-in-1 technology design means you can set the output signal to either TVI, CVI, AHD or
CVBS.
Built in twin IR arrays provide 40mof night time vision to get 24/7 performance on these new
eyeballs.
This 5MP modelis a perfect match for higher spec DVRs suchas the new Zip Supa DVR that
can record in 5MP quality. Pick this modelfor finer detailing ifyour business relies on its CCTV
to protect employees or stock.
2 Tools & Handy Extras
Screwdriver
Drill
Hammer
12V DC PSU
Drillbits
BNC Crimp Tool& BNCs
RG59 Coax Cable
DigitalMulti-Meter
LCD400K - CCTV Test monitor

xSEE615
2
© 2021 System Q Ltd
ZipNVR.com
3 Connections
The camera has a 2.1mmsocket which requires 12V DC, use a regulated power supply rated
above the current draw ofthe camera.
The camera is polaritysensitive so connections must be correctly made.
The camera has a standard BNC connector for the 4-in-1 video output, the output canbe
changed to AHD, CVI or CVBS ifrequired.
4 4-In-1 Technology
Selectable HD-TVI, HD-CVI, AHD and CVBS (Analogue) Output. As default the camera is
set to HD-TVI, however the output canbe changed to AHD, CVI or CVBS ifrequired.
This output can be changed withthe dip switches onthe fly-lead ofthe camera. Please note the
“Output Mode”in the menuof the DVR won’t change the format, as the dip switch overrides the
output.
The dip switch configuration can be found below:-

Mounting
3
© 2021 System Q Ltd
ZipNVR.com
5 Mounting
5.1 Eyeball
A template is provided in the boxfor markingthe hole positions for the fixingscrews.

xSEE615
4
© 2021 System Q Ltd
ZipNVR.com
6 Motorised Lens
To access the Motorised Lens via coaxitron:-
1. Click on the image in Live view
2. Click on the PTZ buttonat the bottomof the screen
3. Use Zoom+ and - to zoomin and out, the camera should automatically focus whenZoom+/-
is released

OSD Menu
5
© 2021 System Q Ltd
ZipNVR.com
7 OSD Menu
Access to the camera menu is by Coaxitron. For the ZIP DVRs, ZIP Coaxitron is set as
default.
To access the Cameras Menu via coaxitron:-
1. Click on the image in Live view
2. Click on the PTZ buttonat the bottomof the screen
3. Click on the IRIS + button to display the menu
Use the directionalarrows to move up and
down through the menu.
Use the directionalarrows left and right to
change the option.
Use IRIS + to select & enter that menu option.

xSEE615
6
© 2021 System Q Ltd
ZipNVR.com
7.1 5MP OSD Menu
AE
BRIGHTNESS
0 ~ 100 (Default 31)
EXPOSURE MODE
GLOBAL /
BLC / FLC
0 ~ 7 (Default 4)
RETURN
AF
AF MODE
SEMI / AUTO / MANUAL
ZOOM
- / +
FOCUS
- / +
BOOT MODE
SAVE POS / WIDE END / TELE END /
TDN AD
OPEN / CLOSE
FOCUS TRIGGER
SELECT (IRIS +)
LENS INIT
SELECT (IRIS +)
RETURN
AWB
MODE
PRO / GREY WORLD
RGAIN
0 ~ 100 (Default 38)
BGAIN
0 ~ 100 (Default 50)
DAY / NIGHT
MODE
EXT / COLOR / B/W /
RETURN
IMAGE ENHANCE
CONTRAST
AUTO /
MANUAL
0 ~ 20 (Default 5)
SHARPNESS
AUTO /
MANUAL
0 ~ 20 (Default 3)
SATURATE
AUTO /
MANUAL
0 ~ 20 (Default 10)
3DNR
AUTO /
MANUAL
0 ~ 20 (Default 13)
2DNR
AUTO /
MANUAL

OSD Menu
7
© 2021 System Q Ltd
ZipNVR.com
0 ~ 20 (Default 19)
RETURN
VIDEO SETTING
HD
NO ADJUSTMENT SEE 4-IN-1 SWITCH
STANDARD
5MP 20 / 4MP 25 / 4MP 30 / 1080P 25 /
1080P 30 /
REBOOT & APPLY
RETURN
LANGUAGE
ENGLISH / SIMPLIFIED CHINESE / TRADITIONAL CHINESE /
RUSSIAN / SPANISH / FRENCH / POLISH / ITALIAN /
PORTUGUESE
WDR
OFF / ON
FUNC
PRIVACY
MODE
OFF / ON
AREA 0
CUSTOMISE
AREA 1
CUSTOMISE
AREA 2
CUSTOMISE
AREA 3
CUSTOMISE
COLOR
RED / GREEN / BLUE
TRANSPARENCY
OFF / ON
RETURN
RETURN
RESET
SAVE – EXIT
EXIT

xSEE615
8
© 2021 System Q Ltd
ZipNVR.com
7.2 Key Menu Settings
Exposure Mode - AUTO / GLOBE / GLOBAL sets the required shutter speed for the current
light level. The shutter speed willautomatically detect the required length of time to keep the
digitalsensor exposed to light. FLK option sets the shutter speed to stop synchronisation with
lighting so that pulsing effect is minimised.
White Balance - Colour adjustment ofthe camera to be set up so objects appear a natural
colour. ATW / PRO (Automatic tracking white balance) continually tracks and adjusts the white
balance, making it suitable for use in cameras in which the image content and lighting are subject
to changes.
Day & Night - The camera can be set to colour or B&W mode or have it automatically switch
Externalis set as default, the switch between colour and black & white is controlled by an
externaltrigger Inthis a light dependent resistor.
DNR (Noice Reduction) - Noise Reduction is the process ofremovingnoise fromthe video
signalby applyinga digitalfilter. 2D noise reduction reduces noise in the foreground ofthe image
where as 3D noise reduction reduces noise in boththe foreground and the background ofthe
image.
D-WDR - Digitally adjusts the exposure in areas of the frame to maintain optimumlevels in both
the dark and bright areas ofan image.
NOTE - Some models may not have D-WDR function.
Reset - Defaults the camera to factory settings. This setting helps when fault finding issues with
the camera to ensure allsettings are defaulted.

Troubleshooting
9
© 2021 System Q Ltd
ZipNVR.com
8 Troubleshooting
8.1 Camera Rebooting / Turning Off
A. Check the voltage to the camera (under load) usinga digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supply which is rated above the current
consumption.
C. Use thicker gauge copper cabling to reduce the voltage drop to the camera, usingthicker
cable willreduce the resistance between the camera and the power supply and therefore reduce
the voltage dropped along the cable.
8.2 Poor Quality Images
A. Check the video format the DVR (digitalvideo recorder), then set the camera to the relevant
video format – see the 4-In-1 Technology
B. Ifset to CVBS, then this is a low quality video output for legacysystems (analogue - CVBS),
when using a 2 MegaPixelDVR or above then use another video format, like HD-TVI.
C. Reset the camera menu via Zip Coaxitron – OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolution of the camera.
8.3 Image is Black & White
A. Check the video format your DVR supports, thenset the camera to the relevant video format
– see the 4-In-1 Technology
B. Reset the camera menu via Zip Coaxitron OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolution of the camera.
8.4 NCD / No Image Displayed on Recorder
A. Check the voltage to the camera (under load) usinga digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supply which is rated above the current
consumption.
C. Use thicker gauge copper cabling to reduce the voltage drop to the camera, usingthicker
cable willreduce the resistance between the camera and the power supply and therefore reduce
the voltage dropped along the cable.
2
5
2
5

xSEE615
10
© 2021 System Q Ltd
ZipNVR.com
D. Ensure that the BNC – BNC lead that is connected between the camera and DVR has no
shorts betweenthe ground and the centre core (positive) or open circuits alongthe centre core
(positive) or open circuits along the ground.

General Maintenance
11
© 2021 System Q Ltd
ZipNVR.com
9 General Maintenance
Routinely clean the camera to prevent dust build up as this can effect the performance of the
camera. It is recommended to use a damp non-abrasive microfibre cloth.
Routinely check the connections for power and data to ensure no water ingress and corrosion.
Check that the cameras are firmly attached to the wallor mountingbracket.
Check playback in the recorder to ensure the camera is recordingand triggering properly.

xSEE615
12
© 2021 System Q Ltd
ZipNVR.com
10 Specification
10.1 SEE895
Resolution
5MP
Lens Type
2.8-12mmMotorised
Image Output
1 Volt Peak-Peak 75 ohm
Min.Illumination
0 Lux IR On
Day/Night
Mechanical(True Day-Night)
IR Range
40m
Input Voltage
12V DC
Current Consumption
500mA (IR On)
IP Rating
IP66
Video Connection
BNC Socket
Power Connection
2.1mmDC Socket
WDR
Yes
Finish
White/ Grey
Build
Metal
Dimensions
135mm(Diameter) x127mm(Height)

Conditions
13
© 2021 System Q Ltd
ZipNVR.com
11 Conditions
11.1 General Company Disclaimer
All specifications are approximate. System Q Ltd reserves the right to change any product
specifications or features without notice. Whilst every effort is made to ensure that these instructions
are complete and accurate, System Q Ltd cannot be held responsible in any way for any losses, no
matter how they arise, from errors or omissions in these instructions, or the performance or non-
performance of the equipment that these instructions refer to.
11.2 WEEE Declaration
This symbol on the products and/or accompanying documents means that used electronic
equipment must not be mixed with general household waste. For treatment, recovery and recycling
please return this unit to your trade supplier or local designated WEE/CG0783SS collection point as
defined by your local council.
11.3 Copyright
© Copyright 2021
Zip is a registered trademark of System Q Ltd, Chesterfield. Derbyshire. S40 2WB

xSEE615
14 ZipNVR.com
© 2021 System Q Ltd
Index
- 2 -
2.1mm DC Socket 2
- 4 -
4-In-1 Technology 2
- A -
Adjustment 5
AHD 2
- B -
BNC 2
- C -
Cleaning 11
Connections 2, 11
Contrast 5
Copyright 13
CVBS 2
CVI 2
- D -
Declaration 13
Dimensions 12
Dip-Switches 2
Disclamer 13
- E -
Exposure 5
- F -
Focus 4
Format 2
- G -
General Disclaimer 13
- H -
Handy Extras 1
- L -
Lens 4
- M -
Maintenance 11
Motorised Lens 4
Mounting 3
- N -
NCD 9
No Image 9
- O -
OSD Menu 5
Output 2
- P -
Power 2
- Q -
Quality 9
- R -
Rebooting 9
- S -
Screws 3
Settings 5
Sharpness 5
Signal 9

Index
15
ZipNVR.com
© 2021 System Q Ltd
Specification 12
- T -
Tools 1
Troubleshooting 9
TVI 2
- V -
Video 2, 9
Video Loss 9
Voltage drop 9
- W -
WEEE Declaration 13
- Z -
Zoom 4