Zip SEE612 User manual

© 2022 System Q Ltd
SEE612
2MP Bullet 2.8-12mm Motorised Lens
Camera
Instruction Manual
ZipDVR.com

xSEE612
I
© 2022 System Q Ltd
ZipDVR.com
Table of Contents
Part 1 Introduction 1
1 SEE612 ............................................................................................................................ 1
Part 2 Tools & Handy Extras 1
Part 3 Connections & Dipswitches 2
Part 4 Dipswitch 4-In-1 Technology 2
Part 5 Mounting 3
1 Bullet .............................................................................................................................. 3
Part 6 Motorised Lens 4
Part 7 OSD Menu 5
1 2MP OSD Menu - Motorised ............................................................................................ 5
2 Key Menu Settings.......................................................................................................... 8
Part 8 Troubleshooting 9
1 Camera Rebooting / Turning Off ..................................................................................... 9
2 Poor Quality Images ....................................................................................................... 9
3 Image isBlack & White .................................................................................................. 9
4 NCD / No Image Displayed on Recorder ......................................................................... 9
Part 9 General Maintenance 10
Part 10 Specification 11
1 SEE612 .......................................................................................................................... 11
Part 11 Conditions 12
1 General Company Disclaimer ....................................................................................... 12
2 WEEE Declaration ......................................................................................................... 12
3 Copyright ...................................................................................................................... 12
Index 13

© 2022 System Q Ltd
1
Index
ZipDVR.com
Introduction
1.1 SEE612
WithanIR reachofup to 40M and a 2.8-12mmmotorised lens, this camera is a great choice for
covering larger areas with CCTV.
2MP Resolution - Compatible with most current DVRs on the market including the Zip DVR
Lite model. Suits domestic installations and commercialjobs witha limited budget.
Tools & Handy Extras
Screwdriver
Drill
12V DC PSU
Drillbits
BNC Crimp Tool& BNCs
RG59 Coax Cable
DigitalMulti-Meter
LCD400K - CCTV Test monitor

04/04/2022
2
xSEE612
ZipDVR.com
Connections & Dipswitches
The camera has a 2.1mmsocket which requires 12V DC, use a regulated power supply rated
above the current draw of the camera.
The camera is polarity sensitive so connections must be correctly made.
The camera has a standard BNC connector for the 4-in-1 video output, the output can be
changed to AHD, CVI or CVBS if required.
Dipswitch 4-In-1 Technology
Selectable HD-TVI, HD-CVI, AHD and CVBS (Analogue) Output. As default the camera is
set to HD-TVI, however the output can be changed to AHD, CVI or CVBS ifrequired.
This output can be changed with the dip switches onthe fly-lead ofthe camera. Please note the
“Output Mode”in the menu ofthe DVR won’t change the format, as the dip switch overrides the
output.
The dip switch configuration can be found below:-

© 2022 System Q Ltd
3
Index
ZipDVR.com
Mounting
5.1 Bullet
A template is provided in the box for marking the hole positions for the fixing screws.

04/04/2022
4
xSEE612
ZipDVR.com
Motorised Lens
To access the Motorised Lens via coaxitron:-
1. Click on the image in Live view
2. Click on the PTZ button at the bottomofthe screen
3. Use Zoom+ and - to zoomin and out, the camera should automatically focus when Zoom+/-
is released

© 2022 System Q Ltd
5
Index
ZipDVR.com
OSD Menu
Access to the camera menu is by Coaxitron. For the ZIP DVRs, ZIP Coaxitron is set as
default.
To access the Cameras Menu via coaxitron:-
1. Click on the image in Live view
2. Click on the PTZ button at the bottomofthe screen
3. Click on the IRIS + / centre button to display the menu
Use the directionalarrows to move up and
down through the menu.
Use the directionalarrows left and right to
change the option.
Use IRIS + to select & enter that menu option.
7.1 2MP OSD Menu - Motorised
AF
AF MODE
SEMI / AUTO / MANUAL
ZOOM
- / +
BOOT MODE
SAVE POS / WIDE END / TELE END /
TDN AD
OPEN / CLOSE
FOCUS TRIGGER
SELECT (IRIS +)
LENS INIT
SELECT (IRIS +)
RETURN

04/04/2022
6
xSEE612
ZipDVR.com
AE
BRIGHTNESS
0 ~ 100 (Default 31)
EXPOSURE MODE
GLOBAL /
BLC / FLC
0 ~ 7 (Default 4)
RETURN
WB
MODE
ATW / MWB
RGAIN
0 ~ 32 (Default 20)
BGAIN
0 ~ 32 (Default 21)
DAY / NIGHT
MODE
EXT / AUTO / COLOR / BW
RETURN
IMAGE ENHANCE
CONTRAST
AUTO /
MANUAL
0 ~ 40 (Default 21)
SHARPNESS
AUTO /
MANUAL
0 ~ 20 (Default 3)
COLOR GAIN
AUTO /
MANUAL
0 ~ 30 (Default 8)
3DNR
AUTO /
MANUAL
0 ~ 30 (Default 4)
RETURN
VIDEO SETTING
VIDEO STANDARD
PAL / NTSC
HD FORMAT
NO ADJUSTMENT
HORIZONTAL
INVERTED
CLOSE / OPEN
VERTICAL
INVERTED
CLOSE / OPEN
WDR
CLOSE / OPEN / EXT
RETURN
LANGUAGE
ENGLISH / SIMPLIFIED CHINESE / TRADITIONAL CHINESE /
RUSSIAN / SPANISH / FRENCH / POLISH / ITALIAN /
PORTUGUESE
RESET

© 2022 System Q Ltd
7
Index
ZipDVR.com
SAVE – EXIT
EXIT

04/04/2022
8
xSEE612
ZipDVR.com
7.2 Key Menu Settings
Exposure Mode - AUTO / GLOBE / GLOBAL sets the required shutter speed for the current
light level. The shutter speed willautomatically detect the required lengthoftime to keep the
digitalsensor exposed to light. FLK option sets the shutter speed to stop synchronisation with
lighting so that pulsing effect is minimised.
White Balance - Colour adjustment ofthe camera to be set up so objects appear a natural
colour. ATW / PRO (Automatic tracking white balance) continually tracks and adjusts the white
balance, making it suitable for use in cameras in which the image content and lighting are subject
to changes.
Day & Night - The camera can be set to colour or B&W mode or have it automatically switch
Externalis set as default, the switch between colour and black & white is controlled by an
externaltrigger Inthis a light dependent resistor.
DNR (Noice Reduction) - Noise Reduction is the process ofremoving noise fromthe video
signalby applying a digitalfilter. 2D noise reduction reduces noise in the foreground of the image
where as 3D noise reduction reduces noise in boththe foreground and the background ofthe
image.
D-WDR - Digitally adjusts the exposure in areas of the frame to maintain optimum levels in both
the dark and bright areas ofan image.
NOTE - Some models may not have D-WDR function.
Reset - Defaults the camera to factory settings. This setting helps when fault finding issues with
the camera to ensure allsettings are defaulted.

© 2022 System Q Ltd
9
Index
ZipDVR.com
Troubleshooting
8.1 Camera Rebooting / Turning Off
A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supply which is rated above the current
consumption.
C. Use thicker gauge copper cabling to reduce the voltage drop to the camera, using thicker
cable willreduce the resistance between the camera and the power supply and therefore reduce
the voltage dropped along the cable.
8.2 Poor Quality Images
A. Check the video format the DVR (digitalvideo recorder), thenset the camera to the relevant
video format – see the 4-In-1 Technology
B. Ifset to CVBS, then this is a low qualityvideo output for legacysystems (analogue - CVBS),
when using a 2 MegaPixelDVR or above then use another video format, like HD-TVI.
C. Reset the camera menu via Zip Coaxitron – OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolution of the camera.
8.3 Image is Black & White
A. Check the video format your DVR supports, thenset the camera to the relevant video format
– see the 4-In-1 Technology
B. Reset the camera menu via Zip Coaxitron OSD Menu
D. Check ifthe DVR (digitalvideo recorder) supports the resolution of the camera.
8.4 NCD / No Image Displayed on Recorder
A. Check the voltage to the camera (under load) using a digitalmulti-meter, ifbelow 10.8V then
move the power supply closer to the camera.
B. For 12V DC cameras, only use regulated power supply rated above the current consumption,
so that the camera is always receiving the correct supply which is rated above the current
consumption.
5
5

04/04/2022
10
xSEE612
ZipDVR.com
C. Use thicker gauge copper cabling to reduce the voltage drop to the camera, using thicker
cable willreduce the resistance between the camera and the power supply and therefore reduce
the voltage dropped along the cable.
D. Ensure that the BNC – BNC lead that is connected betweenthe camera and DVR has no
shorts betweenthe ground and the centre core (positive) or open circuits along the centre core
(positive) or open circuits along the ground.
General Maintenance
Routinely clean the camera to prevent dust build up as this caneffect the performance ofthe
camera. It is recommended to use a damp non-abrasive microfibre cloth.
Routinely check the connections for power and data to ensure no water ingress and corrosion.
Check that the cameras are firmly attached to the wallor mounting bracket.
Check playback in the recorder to ensure the camera is recording and triggering properly.

© 2022 System Q Ltd
11
Index
ZipDVR.com
Specification
10.1 SEE612
Resolution
2MP
Lens Type
2.8-12mmMotorised Lens
Image Output
1 Volt Peak-Peak 75 ohm
Min.Illumination
0 Lux IR On
Day/Night
Mechanical(True Day-Night)
InfraRed LEDs
4 High Powered LEDs
IR Range
40M
Input Voltage
12V DC
Current Consumption
500mA (IR On)
IP Rating
IP66
Video Connection
BNC Socket
Power Connection
2.1mmDC Socket
Finish
White/ Grey
Build
Metal
Dimensions
90mm (Diameter) x 151mm(Length ex bracket)

04/04/2022
12
xSEE612
ZipDVR.com
Conditions
11.1 General Company Disclaimer
All specifications are approximate. System Q Ltd reserves the right to change any product
specifications or features without notice. Whilst every effort is made to ensure that these
instructions are complete and accurate, System Q Ltd cannot be held responsible in any
way for any losses, no matter how they arise, from errors or omissions in these
instructions, or the performance or non-performance of the equipment that these
instructions refer to.
11.2 WEEE Declaration
This symbol on the products and/or accompanying documents means that used electronic
equipment must not be mixed with general household waste. For treatment, recovery and
recycling please return this unit to your trade supplier or local designated WEE/CG0783SS
collection point as defined by your local council.
11.3 Copyright
© Copyright 2022
Zip is a registered trademark ofSystemQ Ltd, Chesterfield. Derbyshire. S40 2WB

Index
13
© 2022 System Q Ltd
ZipDVR.com
Index
- 2 -
2.1mm DC Socket 2
- 4 -
4-In-1 Technology 2
- A -
Adjustment 5
AHD 2
- B -
BNC 2
- C -
Cleaning 10
Connections 2, 10
Copyright 12
CVBS 2
CVI 2
- D -
Declaration 12
Dimensions 11
Dip-Switches 2
Disclamer 12
- F -
Format 2
- G -
General Disclaimer 12
- H -
Handy Extras 1
- M -
Maintenance 10
Motorised Lens 4
Mounting 3
- O -
OSD Menu 5
Output 2
- P -
Power 2
- S -
Settings 5
Specification 11
- T -
Tools 1
Troubleshooting 9
TVI 2
- V -
Video 2
Video Loss 9
Voltage drop 9
- W -
WEEE Declaration 12