ZKTeco SLG200 User manual

User Manual
SLG200
Version: 1.0
LED Azul (Status Bluetooth)
LED VERMELHO (Status Wi-Fi)
Interruptor/Botão de reset
Micro-USB
Adicionando o Smart Gateway
Etapa 1. Baixe o App
Digitalize o código QR para baixar o aplicativo.
Abra o aplicativo, registre-se e faça login na conta.
Etapa 2. Adicione o Gateway
Nota: O modo de emparelhamento padrão é o Modo EZ. Se a luz
vermelha piscar lentamente, mantenha o botão de Reset
pressionado por 5 segundos para mudá-lo para piscar rapidamente.
Conecte o Gateway à tomada usando o adaptador de energia
fornecido. Aguarde alguns segundos até que a luz vermelha
pisque rapidamente.
Abra o App. Toque no botão "+" no canto superior direito, e
selecione a categoria "Smart Lock/Wireless Gateway(BLE)".
Siga as instruções na tela para conectar o Gateway à redeWi-Fi de
2.4 GHz e concluir a conguração.
Descrição do Produto
Português
1.
2.
1.
2.
3.
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including inter ference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmf ul interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is
encouraged to tr y to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Conne ct the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
IMPORTANT! Any changes or modications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.

Blue LED (Bluetooth Status)
RED LED (Wi-Fi Status)
Switch/Reset Button
Micro-USB Interface
Interruptor/Botón Reset
Interfaz Micro-USB
LED Rojo (Estado De la
Conexión Wi-Fi)
LED Azul (Estado Bluetooth)
Add the Smart Gateway
Step 1. Download the App
Scan the QR code to download the App.
Open the App, register the details and sign in to the account.
Step 2. Add the Gateway
Follow the on-screen instructions to connect the Gateway to
2.4GHz Wi-Fi network and completethe setup.
Plug the Gateway into the outlet with the provided Power
Adapter. Wait for a few seconds until the Red LED blinksquickly.
Open the App. Tap the "+" button on the top right corner of the
interface, and then select "Smart Lock/Wireless Gateway(BLE)"
category.
Agregar el Gateway Inteligente
Paso 1. Descargue la Aplicación
Escanee el código QR para descargar la aplicación.
Abra la aplicación, regístrese e inicie sesión en la cuenta.
Paso 2. Agregue el Gateway (Puerta de Enlace)
Nota: El modo de emparejamientopredeterminado es el modo EZ.Si
la luz roja parpadea lentamente, mantenga presionado el botón de
reinicio durante5 segundos para cambiarlo a parpadeorápido.
Siga las instrucciones en pantalla para conectar el Gateway a la
red Wi-Fi de 2.4GHz y completarla conguración.
Conecte el Gateway al tomacorriente con el adaptador
suministrado. Espere unos segundos hasta que la luz roja
parpadee rápidamente.
Abra la aplicación. Toque el botón "+" en el extremo superior
derecho y luego seleccione la categoría "Cerradura inteligente/
Puerta de enlace inalámbrica(BLE)".
Product Overview
English
Descripción del Producto
Español
1.
2.
2.
3.
1.
1.
2.
1.
2.
3.
Note: The default pairing mode is EZ Mode. If the Red LED blinks
slowly, press and hold the Reset button for 5 seconds to make the
Red LED blink rapidly.