ZKTeco SLG410 User manual

Model: SLG410
Version: 1.0
Quick Start Guide
WAN LAN W IFI ZIG BEE POW ER

Configuring the SLG410 gateway
Connect the power cable to the gateway.
1.
Connect PC with gateway LAN port by network cable and
WAN port with the router, respectively. Both the LAN and WAN
LED will blink on the gateway.
2.
1
Input the default gateway IP address 192.168.82.1 in the web
browser to enter the gateway login page. (Default login
password is admin)
4.
Configure your PC to Obtain an IP address automatically in
TCP/IPv4 setting.
3.

2
After login, the following page shows up:
5.
Select the WAN Setting option to configure a network IP to
provide a network to gateway, then follow the step as below:
6.
(1) Choose the “Static IP” option in WAN Type, then fill out the
appropriate IP address which is able to access internet.
And lick "Netmask" and "Gateway bar", they will fill out
authomatically, if no, please fill out manually. (e.g.
192.168.132.250).

3
Click OK to save. After a successful connection, the
gateway configures automatically, and the Router Status
page changes as shown below.
(2)
Select Administrator option, to configure Remote IP and
server port.
7.
(1)
Click OK to save and it will remind success.
(2)
The IP is the local IP address of client’s PC in which the
ZKBioHLMS software is installed. The server port is 18088
by default.

4
Login to the ZKBioHLMS to add the gateway to the platform.
8.
Click Hotel->Device Mgnt->Device->Search.
(1)
Click Search button to search the gateway and add the
configured one.
(2)
Edit the Gateway Name and click OK. Then click Refresh,
the gateway will appear on the page.
(3)

ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 - 82109991
Fax : +86 755 - 89602394
www.zkteco.com
Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.