ZOpid X'MAS BALL HF-Z015CB User manual

DIGITAL PHOTO ORNAMENT X’MAS
BALL User Manual
HF-Z015CB
The pictures, diagrams, and certain functions
described in this manual may differ from the
actual product due to different models
Visit www.hittusa.com for a revised user
manual or troubleshooting tips
PREFACE
We express our sincere thanks for purchasing this Digital
Photo Ornament (DPO)!
Before operating this DPO, be sure to read this user
manual carefully. After reading it, please keep it in a safe
place for future reference.
We reserve the right to make changes to this DPO,
Software and/or this User Manual without notice. Please
visit our support website www.hittusa.com for additional
product information and/or updates.
NOTE: The pictures, diagrams and certain functions
described in this manual may differ from the actual product
due to different models.
PRECAUTIONS
Before operating this DPO, please read the following
precautions carefully:
• Do not operate this DPO in extremely cold, hot, dusty
or damp environment
• Avoid putting this DPO under direct sunlight
• Do not scrub this DPO with a hard thing; it may result
in scratches on the screen and/or damage to the
hardware
• Keep this DPO and all accessories out of reach of
children under the age of 3 years.
KEY FEATURES
• 1.5" super-bright LCD display
• 150+ hours of non-stop slideshow (w/ new batteries &
medium brightness setting)
• Requires 2AA batteries (not included – use alkaline
batteries)
• Built-in memory for storage of up to 58 photos
• Multi-lingual on screen menu
• Power ON & OFF Timer
• Clock & date display
• Support PNG, TIFF, JPEG, GIF & BMP picture formats
• Plug-n-Play operation
BUTTONS & INTERFACE
Control Key
1On / Off / Menu /
Confirm 4Battery Door
2Forward 5Battery Door
Latch
3Backward 6USB Connector
Getting Started
Open the battery door by pressing on the latch.
Insert two pieces of AA (LR6) batteries and close the
battery door. Press 1for 2 secs to power up the
DPO.
To power off, simply follow the same step.
Press 1button again to display the MENU MODE.
Press 23to scroll through the functions in the
menu.
Select a function and press 1button to set the
selected function.
Rev. DPO-RXB-14/06 10 GT-21649-1 P.1 Rev. DPO-RXB-14/06 10 GT-21649-1 P.2 Rev. DPO-RXB-14/06 10 GT-21649-1 P.3

SET CLOCK
Press 23to select and set the date and time.
Press 1when finished.
SLIDE SHOW
Press 23to select the interval time between each
slide. There are 11 options ranging from Off, 1 sec,
3 secs, 5 secs, 10 secs, 15 secs, 20 secs, 30 secs,
1 mins, 5 mins, 15 mins and 30 mins. Press 1to
set and confirm.
When Off is selected, the DPO will display a still
photo without slide show. You have to press 23
manually to view the photos stored in DPO.
BRIGHTNESS
Press 23to select the level of screen brightness
from 0 to 7. Then press 1to confirm.
AUTO OFF
Press 23to select the idle time for automatic
power-off feature. Then press 1to confirm. When
OFF is selected, the DPO will always be on.
ON – OFF TIMER
Press 1to cycle through the
ON TIMER and OFF TIMER
hours (00 - 24), minutes (00 -
59), and STATUS (Enable /
Disable) settings. Press 23
to adjust the values.
LANGUAGE
Press 23to select the language. Then press 1
to confirm.
Select Exit to display the CLOCK MODE. Then
press 23to display the PHOTO MODE.
BATTERY
The DPO can operate with USB power, or two AA
batteries. Change batteries when the battery
indicator becomes low or the screen flashes
continuously.
WARNING
Please avoid pulling out the USB cable while
downloading pictures, doing so may destroy
some information on the frame
After unplugging the DPO from the PC's USB
port, please wait for 10 seconds before re-
plugging.
PHOTO MANAGER
ADD PHOTOS / DELETE / DELETE ALL / SAVE
AS
Use the bundled USB cable to connect the DPO to
your Windows PC. The PhotoManager software will
pop up upon plug-in. If PhotoManager does not pop
up automatically (due to the Autorun setting of the
PC), go to My Computer, double click miniDPF CD
icon and run the miniDPF program manually.
In the PhotoManager window, click “Refresh Photo
List” to show all photos stored in the DPO. After
refreshing the list, it is ready to modify the photo list
and to upload new photos to the DPO. Supported
photo formats are PNG, TIFF, JPEG, GIF and BMP.
IMPORTANT: When finished modifying the photo
list, click “CONFIRM CHANGES”.
MOVE UP / MOVE DOWN / ROTATE / CROP
You can arrange the photos priority by the “Move Up
/ Move Down” button. “Rotate” the photos for the
correct orientation. “Crop” the photos to best fit the
screen size.
SYNC CLOCK
You may also use the “Sync. Clock” function
provided in the PhotoManager software to
synchronize the DPO clock with the computer clock.
STATUS BAR
When the DPO is successfully connected to the PC
by the USB cable, the status bar will show
"Connected". The right hand side icon shows the
numbers of photos loaded into the DPO and the
maximum photo storage.
You can change the factory default setting via the
PhotoManager software. Click “REFRESH
SETTING” to download the current default setting
from the DPO.
Rev. DPO-RXB-14/06 10 GT-21649-1 P.6
Rev. DPO-RXB-14/06 10 GT-21649-1 P.4 Rev. DPO-RXB-14/06 10 GT-21649-1 P.5

When you have finished the modifying of the
settings, click “CONFIRM CHANGES” After
confirming the changes, the DPO will reset for the
new settings to take effect.
When you have finished the modifying of the
settings, click “CONFIRM CHANGES” After
confirming the changes, the DPO will reset for the
new settings to take effect.
Note: PhotoManager runs on Windows
XP/2003/Vista, and Windows 2000 with GDI+
installed only.
Note: PhotoManager runs on Windows
XP/2003/Vista, and Windows 2000 with GDI+
installed only.
TROUBLESHOOTING TIPS
LIMITED 90-DAY WARRANTY
Coverage: Hi-Tech Trading (USA), Inc. (“HiTT”)
warrants this product (“product”) against defects in
materials and workmanship under normal consumer
use for 90 days from the date of purchase. HiTT, at its
option, will at no charge repair, replace or refund the
purchase price of this product should it not conform to
this warranty. This limited warranty is a consumer’s
exclusive remedy, extends only to the first consumer
purchaser, is not transferable and is valid only on
products purchased by consumers in the United States
or Canada.
EXCLUSIONS:
Normal Wear and Tear: Periodic maintenance, repair
and replacement of parts due to normal wear and tear
are excluded from coverage.
Miscellaneous: This warranty does NOT cover defects
or damage that result from: (a) improper operation,
storage, misuse or abuse, accident or neglect, such as
physical damage (cracks, scratches, etc.) to the surface
of the Product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Product for commercial purposes
or subjecting the Product to abnormal usage or
conditions; (d) service, installation, alteration, or
modification in any way by someone other than HiTT
and, (e) other acts which are not the fault of HiTT.
Obtaining Service: To obtain service or information,
please send email to
[email protected] . You will
receive instructions on how to ship the product, at your
expense, to a HiTT Service Center. To obtain service,
you must include a copy of your receipt, receipt is not
required if you registered your product on our website
www.hittusa.com within 30 days of purchase date.
COMPANY & CONTACT INFORMATION
Hi-Tech Trading USA Inc
P.O. Box 179
Woodbury, NY 11797 U.S.A.
Web: www.hittusa.com
Email: [email protected]
ZOpid and the Stylized Logo are registered in the US
Patent & Trademark Office. All other product or service
names are the property of their respective owners.
© 2010 Hi-Tech Trading USA Inc
The information contained in this User Manual is believed
to be correct at the time of printing. HiTT reserves the right
to change or modify any information or specifications
without notice. The contents of this User Manual are
provided “as is.” Except as required by applicable law, no
warranties of any kind, either express or implied, including,
but not limited to, the implied warranties of merchantability
and fitness for a particular purpose, are made in relation to
the accuracy, reliability, or contents of this guide
Can’t see the pictures
that you saved to the
frame using
PhotoManager
Make sure to click on
“Confirm Changes”
after adding all the
pictures to the
selection using
PhotoManager
Frame does not
power on
Make sure you are
using new set of
batteries & batteries
are installed properly.
Batteries do not last
too long
Make sure to use
alkaline batteries for
long battery life
Rev. DPO-RXB-14/06 10 GT-21649-1 P.7 Rev. DPO-RXB-14/06 10 GT-21649-1 P.8 Rev. DPO-RXB-14/06 10 GT-21649-1 P.9