ZoraBots Billy-Billy User manual

For support, please login on our forum zorabots.freshdesk.com - email [e-mail] or call [phone]
Look for a nice spot for your Billy-Billy.
Step 1
Once Billy-Billy is restarted and says he
is ready for use, you can for instance ask
Billy-Billy what time it is. This is done by
saying “Billy-Billy” first and waiting until his
cheeks turn blue. After that you can ask:
"What time is it?".
If Billy-Billy understood you,
the cheeks will turn purple and
he will tell you the time.
After restarting, when the
cheeks turn green Billy-Billy
will let you know that the start-
up is completed and will speak
and understand English.
Step 3
Connect the power plug
and softly press the on/off
switch to start up your
Billy-Billy.
Billy-Billy's cheeks will stay red during
the start up. This takes about 1 minute.
When Billy-Billy is ready for use he will ask
you in English, Dutch and French which
language you prefer. Do not reply if the
heard language is not the one you want.
The next language will follow. The robot will
reboot after you confirmed the language.
Step 2
V1.11
Step 4
Quick guide EN
Billy-Billy can be managed locally or via
the online website. Please connect
Billy-Billy to your local wireless network
by following these steps:
With the USB-drive plugged in, the com-
mand “Billy-Billy” can be spoken. Once
the LEDs turn blue, the command
“Connect to Wifi” must be used to
connect to the selected network.
Insert the supplied
USB-drive into the
Windows-computer and
open the application Billy-
BillyConfig.exe*. Enter the
required information for the
wifi-network.
Once the credentials have
been generated, the
USB-drive can be plugged
into the back of Billy-Billy.
Step 5
After connecting Billy-Billy to the
internet, the website
http://www.billybot.be
can be used to manage the plant.
Follow the steps below when using the
website:
Create an account (or login if registered).
Create a garden (or select an existing one).
Add Billy-Billy to the garden
Once the inner pot has been placed into Billy-
Billy the status of the plant will be shown there.
*: If this file is no longer on the USB-stick,
it can be downloaded from the website:
http://www.billybot.be/downloads

For support, please login on our forum zorabots.freshdesk.com - email [e-mail] or call [phone]
Note: The entire list of everything you can ask Billy-Billy is in the back of the full manual on the
website: http://www.billybot.be
ATTENTION! Your Billy-Billy will regularly
check if a software update is available. If
this is the case, the update will automati-
cally be installed. This is necessary to
improve your Billy-Billy and to constantly
add new features.
During the update the cheeks of the
Billy-Billy will blink red, green and blue.
Make sure you don't switch off Billy-Billy
during an update. Billy-Billy will notify you
when the update is successful.
Step 6
Prepare your Billy-Billy for the first plant.
Use the following steps:
Step 7
Are you thirsty?
Hello Billy-Billy.
What time is it?
What is your IP address?
Do you have enough light?
Is it warm enough?
Say “Billy-Billy ....”
Introduce yourself.
Is everything okay?
How much water do you
have?
What is your temperature?
Can you repeat?
What day are we today?
What is the meaning of life?
What is your plant name?
What’s the weather for today?
What are today’s headlines?
Billy-Billy commands
Colour codes cheeks Billy-Billy
Colour Function when
coloured
Function when
blinking
Everything is ok
with Billy-Billy.
No actions are
necessary
Billy-Billy is waiting
for the re-insertion
of the inner pot.
Billy-Billy heard
his “wake word”
and is waiting for
a command.
Please wait a little
while, Billy-Billy is
busy.
Billy-Billy is
starting up or
shutting down.
Billy-Billy is
talking.
Billy-Billy is
updating.
Billy-Billy needs
help. Ask
Billy-Billy if
everything is OK.
Quick guide EN