ZoraBots Billy-Billy User manual

For support, please login on our forum support.zorabots.be or send an e-mail to [e-mail]
Look for a nice spot for your Billy-Billy.
Step 1
Step 3
Step 2
V2.1
Step 4
Quick guide EN
If Billy-Billy understood you,
the cheeks will turn purple and
he will tell you the time.
Connect the power plug
and softly press the on/off
switch to start up your
Billy-Billy.
Billy-Billy's cheeks will stay red during
the start up. This takes about 1 minute.
When Billy-Billy is ready for use he will ask
you in English, Dutch and French which
language you prefer. Do not reply if the
heard language is not the one you want.
The next language will follow. The robot will
reboot after you confirmed the language.
Perform the following steps to connect
Billy-Billy to a wifinetwork:
Use ZBOS Control to create a file with the
information for the wifinetwork.
Surf to the website https://control.zorabots.be/
using your browser.
Tap the option 'WiFi setup'
and enter the information
for your wifinetwork(1) and
download the file (2)
Copy the downloaded file
to a usb-drive.
Insert the usb-drive into
a usb slot at the
back of Billy-billy.
Say 'OK Billy-Billy' to make Billy start listening
and then state the command 'connect to wifi'
to connect Billy-Billy to the wifinetwork.
2
11
Step 5
Link Billy-Billy to the ZBOS Control app.
Scan a code below to install the app on your
smartphone or tablet.
For more information on using the app,
please refer to the manual on the website
https://docs.zorabots.be.
After restarting, when the
cheeks turn green Billy-Billy
will let you know that the start-
up is completed and will speak
and understand English.
Once Billy-Billy is restarted and says he
is ready for use, you can for instance ask
Billy-Billy what time it is. This is done by
saying “Billy-Billy” first and waiting until his
cheeks turn blue. After that you can ask:
"What time is it?".

Note: The entire list of everything you can ask Billy-Billy can be found on the website: https://docs.zorabots.be
Step 6
Prepare your Billy-Billy for the first plant.
Use the following steps:
Step 7
Are you thirsty?
Hello Billy-Billy.
What time is it?
What is your IP address?
Do you have enough light?
Is it warm enough?
Say “Billy-Billy ....”
Introduce yourself.
Is everything okay?
How much water do you
have?
What is your temperature?
Can you repeat?
What day are we today?
What is the meaning of life?
What is your plant name?
What’s the weather for today?
What are today’s headlines?
Billy-Billy commands
Colour codes cheeks Billy-Billy
Colour Function when
coloured
Function when
blinking
Everything is ok
with Billy-Billy.
No actions are
necessary
Billy-Billy is waiting
for the re-insertion
of the inner pot.
Billy-Billy heard
his “wake word”
and is waiting for
a command.
Please wait a little
while, Billy-Billy is
busy.
Billy-Billy is
starting up or
shutting down.
Billy-Billy is
talking.
Billy-Billy is
updating.
Billy-Billy needs
help. Ask
Billy-Billy if
everything is OK.
Quick guide EN
For support, please login on our forum support.zorabots.be or send an e-mail to [e-mail]
ATTENTION! Your Billy-Billy will regularly
check if a software update is available. If
this is the case, the update will automati-
cally be installed. This is necessary to
improve your Billy-Billy and to constantly
add new features.
During the update the cheeks of the
Billy-Billy will blink blue, green and red.
Make sure you don't switch offBilly-Billy
during an update. Billy-Billy will notify you
when the update is successful.