Zorpro Zortemp 1000 User manual

Zortemp 1000 !
Instruction Manual !

Thank you for purchasing the Zortemp 1000 Fever Detection System. Please take a
moment to review the setup and operational information here. !
Read temperature on
your wrist or forehead
(sensor position set at factory)
Initial Setup !
The Zortemp 1000 is a complete, “Stand Alone” unit. Simply unbox the unit, remove all
packing material and plastic protectors; then plug the unit into the wall using the
provided power connection cable. The Zortemp 1000 can be plugged into any outlet
that provides 110VAC - 240VAC. !

Control Panel Settings !
The Zortemp’s graphic interface is a touch screen with very simple controls. To make
changes, press the “Setting” icon in the bottom right hand corner of the screen. Type in
the default password of 1234, then press OK. !
You’ll be able to change the following options:!
!
-"Language: Select the language you use as your primary language. In most cases
this will be selected as “English”. !
-Temperature: Choose either Celsius or Fahrenheit !
-Voice / Volume - slide the volume bar to the appropriate setting to enable you to
hear the alarms or information given. Sliding the volume control all the way to the
left will turn all sounds off.!
-Voice On/Off- if your temperature is in the expected safe range, you’ll hear the word
“Safe”. If your temperature is outside the expected safe range, you’ll hear the word

“Abnormal” and a siren will sound. You have the option of turning offthe Safe and/
or Abnormal sounds. Simply touch the box until you see a green check mark
indicating sounds will be heard, or a red X indicating no voice will be heard.!
-Data/Counter: The unit displays the number of people that pass and the number of
people that fail. You can clear these counters by simply touching the X on the right
hand side of the counter. !
-Alarm Threshold: use the up and down arrow keys to select the temperature at
which an alarm will sound. Suggested range is 2 degrees higher than a normal
temperature reading on the unit. For example - if the normal, average reading on
the Zortemp 1000 is 97.8, we suggest setting the alarm threshold to 99.8!
After setting the variables as desired, click the confirm button at the bottom of the
screen to exit the Setup Menu.
Hand Sanitizer!
An automated hand sanitizer dispenser is attached to the front of the Zortemp 1000.
This convenient feature makes it easy for anyone entering your facility to make sure
they have clean hands. !
Simply cup your hands under the motion activated sensors near the bottom of the
dispenser, and the appropriate amount of sanitizing gel will be dispensed into your
hands. !
Once you have the sanitizing gel in your hands, rub your hands together in a manner
that evenly distributes the sanitizing gel all over each of your hands. The gel dries
quickly, so there is no need to use paper towels to dry your hands. !
The dispenser is re-fillable and has a capacity of 1000ML. It requires 4 AA batteries.!
Operations !
Walk up to the unit, and hold your wrist approximately 1 - 2 inches away from the
temperature sensors on the right hand side of the Zortemp 1000. !
The screen will display the body temperature and give an audible indicator of pass or
fail. !
It is important to note that a secondary “medical” thermometer should be used to
confirm if a person has a fever that may require additional medical treatment. !
Calibration
The Zortemp 1000 is designed for operating indoors and in a temperature controlled
environment. The Zortemp 1000 does not require calibration. All temperature sensors

are set at the factory to properly display the correct temperature. However, changing
environments may lead to small shifts in how the sensor detect and display
temperature. From time to time, it is advisable to compare the Zortemp 1000 readings
to a medical thermometer. If there is a notable difference, simply change the “alarm”
temperature on the Zortemp 1000 to appropriately reflect what you need.!
Options!
There are built in options for the Zortemp 1000 that allow for interfacing with access
control software or for sending signals for controlling doors, turnstiles, etc.!
-Voltage Contact Point: there is a contact point available to supply 5VDC when a
person gets a “safe” reading. Contact Technical Support for assistance with
connecting and using this option.!
-Wifi Connection: The hardware for this option is now available, but software updates
are still in the works to enable connectivity. !
Disclaimer
Our products are not used to diagnose the coronavirus. Zorpro is not advertising our
scanners for use in the medical industry or for medical purposes. Our products can
identify individuals in a population that show higher than average temperature based on
the set parameters. Our scanners do not find individuals experiencing coronavirus
symptoms. There is no way to thermally detect an infected individual who doesn’t have
an elevated body temperature. Only a licensed medical professional can determine if a
“hot” individual is experiencing an abnormal medical condition.
Warranty
The Zortemp 1000 is covered by a one year warranty against manufacture defects. All
warranty replacement and repair must be approved by Zorpro prior to replacement or
repair of the unit. Obvious abuse or neglect of the Zortemp 1000, will negate any
warranty coverage. The warranty does not cover damage caused by dropping the unit
or tipping it over on the floor or other hard surfaces.

Make theWorldSafer
Model:Zortemp1000 Body Temperature SensingStand
No.
TechnicalStandard
TechnicalParameter
1
Display
7InchIPSDisplay
2SensorHeight100cm(customizable)
3Sensor1Sensor(2optional)
4
DataDisplay
Real-timedisplayoftemperature,etc.
5AlarmTemperature37℃(adjustable)
6TestPositionForeheadandWrist
7
Accuracy
±0.3℃
8TemperatureUnitCelsiusDegree/Fahrenheit(Setbeforeleavingfactory)
8Pass Rate60person/minute
9LanguageEnglish
10 FullIntegratedDesignEasySelfinstallation
11 ProductSize410(L)x1850(H)x280(W)mm
12 MaterialSPCC(Durable)
13 CertificateCEApproved,ISO14001·ISO9001·OHSAS18001
14 N.W./G.W.26kg/66kg
PackingSize1950440560mm/Woodencase
18 Working Environment
Working-Temp-2045℃
Humidity
90A(RH)
WorkingBoltageAC100-240,5060Hz
LocationIndoor,Semi-outdoor,nosunlight
19
Warranty
12month
ApplicationTrainStation,School,Hospital,OfficeBuilding,etc.
Product Introduction
INFRARED BODCTEMPERATUREDETECTOR
TheZortemp1000 combines aprofessionalIPS screenand abuilt-inhigh
precision infraredtemperature sensor, hichcan uicklymeasure temperature
in the detection area to ensure accurate and ecient temp.
Users only need to place their rist or forehead near the detection point and can
uickly and accurately identifytheir temp.
Parameter
Non-contact
Detection of
510cm,
DisinfectHand
at sametime
7H IPSScreen:
PassCount
AlarmCounts
SafeTemp.
AlarmTemp.
Adjustable
AlarmTemp.
Threshold,
Sound/Bisual
Alarming
RealTime
Broadcast
ForNormal
Abnormal
Temp.

Product Warranty, Disclaimers, Terms and Conditions, Returns
1. Limited Product Warranty
1.1. $Limited Warranty. Zorpro warrants to original Buyer that for a period of one (1)
year from the date of shipment of the product that such product will materially conform
to specifications set forth in the Instruction Manual and be free from material defects in
material and workmanship. !
1.2.$Disclaimer: EXCEPT FOR THE WARRANTY SET FORTH IN SECTION 1.1
ABOVE, ZORPRO MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING ANY (A) WARRANTY OF MERCHANTABILITY; OR (B)
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE; WHETHER EXPRESS
OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE,
USAGE OF TRADE OR OTHERWISE.!
1.3. "Limitation of Remedy. Buyer’s sole and exclusive remedy for any defect in the
product, whether the claim arises by virtue of the limited warranty or otherwise, shall
be limited to the repair or replacement (at Zorpro’s option) of such product. If, within
the warranty period, Buyer believes the product to be defective, Buyer must promptly
notify Zorpro of the nature of the defect. The product may not be returned without first
obtaining Zorpro’s authorization and shipping instructions. If the product is defective
and Zorpro is unable to repair the product to conform to the limited warranty, Zorpro
will, at its option, either refund the purchase price or provide a replacement product
which conforms to the limited warranty. The replaced or repaired product will have a
limited warranty of 365 days from delivery of original product purchase date. !
2. Limitation of Liability
2.1$No Consequential or Indirect Damages. IN NO EVENT SHALL ZORPRO BE
LIABLE TO BUYER, OR ANY THIRD PARTY FOR CONSEQUENTIAL, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, PUNITIVE OR ENHANCED DAMAGES, OR
LOST PROFITS OR REVENUES, ARISING OUT OF, RELATING TO, OR IN
CONNECTION WITH ANY BREACH OF THIS AGREEMENT, REGARDLESS OF (A)
WHETHER SUCH DAMAGES WERE FORESEEABLE, (B) WHETHER OR NOT ZORPRO
WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES AND (C) THE LEGAL OR
EQUITABLE THEORY (CONTRACT, TORT OR OTHERWISE) UPON WHICH THE CLAIM
IS BASED. !
2.2.$Maximum Liability. IN NO EVENT SHALL ZORPRO’S LIABILITY ARISING OUT
OF OR RELATED TO THIS AGREEMENT, WHETHER ARISING OUT OF OR RELATED

TO BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE,
EXCEED THE TOTAL OF THE AMOUNT PAID TO ZORPRO FOR THE PRODUCT. !
Buyer acknowledges and agrees that the parties entered into the agreement for the
sale and purchase of the product in reliance upon the limitations of liability set forth in
this Section 2, that the same reflect an allocation of risk between the parties (including
the risk that a contract remedy may fail of its essential purpose and cause
consequential loss), and that the same form an essential basis of the bargain between
the parties. !
3. $Governing Law and Forum. !
This Agreement and all documents related to the product, and all matters arising out of
or relating to this Agreement, whether sounding in contract, tort, or statute, are
governed by, and construed in accordance with, the laws of the State of Utah, United
States of America, without giving effect to the conflict of laws provisions thereof to the
extent such principles or rules would require or permit the application of the laws of
any jurisdiction other than those of the State of Utah. Buyer irrevocably consents to the
exclusive jurisdiction of the Fourth District Court, State of Utah, in and for Utah County,
regarding all controversies between the parties. !
4. Modification. None of these terms and conditions may be modified, waived or
discharged unless such waiver, modification or discharge is agreed to in writing signed
by both the Buyer and Zorpro. !
5. Entire Agreement. These terms and conditions constitute the entire agreement
between the parties and supersede any prior proposals, advertisements, negotiations,
understandings, agreements or representations. !
Return Policy: !
We do not accept any returns on products sold. If an item sold by Zorpro is under
warranty we will fix or replace the broken item. !