Zotac ZBOX-CI329NANO-BE-W3D User manual

291-MB362-03S5F
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Zotac ZBOX
CI329 nano ZBOX-CI329NANO-BE-W3D o cerca il tuo prodotto tra le migliori offerte di PC
Desktop e Workstation

ZOTAC ZBOX nano
1
ZOTAC ZBOX nano
User’s Manual
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be registered
trademarks or copyrights of their respective companies, and are used for identication
purposes only. All trademarks are the property of their respective owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

ZOTAC ZBOX nano
2
Table of Contents
Product specications ----------------------------------------------------------------------------------------3
Safety information ----------------------------------------------------------------------------------------------4
Setting up your system-------------------------------------------------------------------------------------4
Care during use ----------------------------------------------------------------------------------------------4
Welcome -----------------------------------------------------------------------------------------------------------5
Package contents -------------------------------------------------------------------------------------------5
Getting to know your ZOTAC ZBOX nano --------------------------------------------------------------6
Front view -----------------------------------------------------------------------------------------------------6
Rear view ------------------------------------------------------------------------------------------------------7
Customizing the ZOTAC ZBOX nano ---------------------------------------------------------------------8
Installing a memory module-------------------------------------------------------------------------------9
Installing a hard disk drive --------------------------------------------------------------------------------10
Setting up your ZOTAC ZBOX nano ----------------------------------------------------------------------13
Positioning the ZOTAC ZBOX nano-----------------------------------------------------------------------15
Mounting the ZOTAC ZBOX nano to an LCD monitor ---------------------------------------------15
Installing drivers and software -----------------------------------------------------------------------------17
Installing an operating system----------------------------------------------------------------------------17
Installing system drivers -----------------------------------------------------------------------------------17
Using your ZOTAC ZBOX nano-----------------------------------------------------------------------------18
Conguring a wireless connection ----------------------------------------------------------------------18
Conguring a wired connection --------------------------------------------------------------------------19
Using a static IP -----------------------------------------------------------------------------------------19
Using a dynamic IP (PPPoE connection) ---------------------------------------------------------19
Conguring audio output-----------------------------------------------------------------------------------20

ZOTAC ZBOX nano
3
Product specications
Processor
• Intel Processor N4100 (quad core, 1.1 GHz up to 2.4 GHz)
Onboard graphics
• Intel UHD Graphics 600
• HDMI 2.0a (max resolution: 4096×2160 @60Hz)
• DP 1.2a (max resolution: 4096×2160 @60Hz)
• VGA (max resolution: 1920×1200 @60Hz)
Memory support
• 2 DDR4-2400 SO-DIMM slots
• Up to 8 GB of memory
USB ports
• 3 USB 3.0 ports
• 1 USB 3.0 Type-C port
• 1 USB 2.0 port
Storage support
• SATA 6.0 Gb/s transfer rates
• Supports one 2.5-inch SATA HDD/SSD (9.5mm max height)
Network support
• Dual Gigabit (10/100/1000Mbps) LAN
• IEEE 802.3 compatible
Wi-Fi support
• CNVi
• 802.11ac Wi-Fi (dual-band)
• Bluetooth 5
Audio
• Digital 8 Channel Audio (LPCM/bitstream via HDMI)
Operating System support
• Windows 10 64-bit (Preinstalled Windows 10 Pro for Windows version)
Product Dimensions
• 127.8mm x 126.8mm x 56.8mm

ZOTAC ZBOX nano
4
Safety information
Your ZOTAC ZBOX nano is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
Read and follow all instructions in the documentation before operating your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure
you leave plenty of space around the system for ventilation. Never insert objects of any kind into
the ventilation openings.
Use this product in environments with ambient temperatures between 0℃ and 35℃.
 If you use an extension cord, please use the UL listed cord and make sure that the total
ampere rating of the devices plugged into the extension cord does not exceed its ampere
rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.

ZOTAC ZBOX nano
5
Welcome
Congratulations on your purchase of the ZOTAC ZBOX nano. The following illustration displays the
package contents of your new ZOTAC ZBOX nano. If any of the below items is damaged or missing,
contact your retailer.
Package contents
• 1 x ZOTAC ZBOX nano
• 1 x ZOTAC VESA mount
• 4 x Mount screws
• 1 x AC Adapter
• 1 x Power Cord
• 1 x WiFi antenna
• 1 x User Manual & Quick Start Guide
• 1 x Support DVD

ZOTAC ZBOX nano
6
Getting to know your ZOTAC ZBOX nano
Front view
1. Power button
The power button turns the mini-PC ON and OFF.
2. Power LED
The Power LED is always ON when power is on.
3. SATA status LED
The SATA LED blinks when data is being written onto or read from the SATA.
4. Wi-Fi status indicator
The Wi-Fi LED is always ON when data is being transfered over Wi-Fi.
5. Memory card reader
The built-in memory card reader reads SD/SDHC/SDXC cards used in devices such as digital
cameras, MP3 players, mobile phones and PDAs.
6. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio output signal to
amplied speakers or headphones.
7. Microphone input
The microphone input is designed to connect a microphone for video conferencing, voice
narrations or simple audio recordings.
8. USB 3.0 Type-C port
The USB 3.0 Type-C port supports the SuperSpeed USB 3.0 devices. Use the port for USB
3.0 devices for maximum performance with USB 3.0 compatible devices.
9. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use the ports for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
1
234
56 7
8
9

ZOTAC ZBOX nano
7
Rear view
1. WiFi antenna connector
The WiFi antenna connector supports the included WiFi antenna.
2. Ethernet ports
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area
networks (LAN) with speeds of 10/100/1000Mbps.
3. USB 3.0 ports
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
4. USB 2.0 port
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mice,
cameras and hard disk drives.
5. HDMI port
The HDMI (High Denition Multimedia Interface) port supports a UHD device such as an LCD
TV or monitor to allow viewing on a larger external display.
6. VGA port
The VGA port supports connection to analog monitors and displays.
7. DisplayPort
The DisplayPort supports both external (box-to-box) and internal (laptop LCD panel) display
connections.
8. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack supplies power to the PC. To prevent damage to the PC, always
use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
1
2
3
4
5
6
78

ZOTAC ZBOX nano
8
Customizing the ZOTAC ZBOX nano
Before installing hardware, please follow the instructions below to remove the cover of your
ZOTAC ZBOX nano.
1. Remove the four screws securing the bottom cover into place.
2. Remove the bottom cover.

ZOTAC ZBOX nano
9
Installing a memory module
1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot
at a 45 degree angle.
2. Gently press down on the memory module until it locks into place by the arms of the
memory slot.
Note: This ZOTAC ZBOX nano accomodates two DDR4 SO-DIMM memory modules. You must install at least one module
for the system to function. PLUS / Windows models include memory pre-installed.

ZOTAC ZBOX nano
10
2. Install the hard disk bracket onto a 2.5-inch SATA hard disk drive /SSD with 2 screws.
Installing a hard disk drive
1. Locate the hard disk bracket, remove the screws, and remove the hard disk bracket as
shown in the image below.
*a 120GB 2.5" SSD is pre-installed in PLUS model, 64GB SSD onboard in Windows model.

ZOTAC ZBOX nano
11
4. Reinstall the screw for the hard disk bracket.
3. Insert the hard disk drive /SSD into the socket and gently slide into the connector.

ZOTAC ZBOX nano
12
Note: if you use 7mm hard drive or SSD, please stick one more thicker foil on the
default foil.
5. If you use 9.5mm hard disk drive, please use the default sticked foil.

ZOTAC ZBOX nano
13
Setting up your ZOTAC ZBOX nano
Please connect your peripherals before using your ZOTAC ZBOX nano
1
34567
2
1. Connecting the WiFi antenna
Connect the WiFi antenna to the WiFi antenna connector.
2. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the other
end to a network hub, switch or router.
3. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard disk drives, SSDs and ash drives to the USB
3.0 port on the system rear panel.
8
1
2
3
4
5 6
7
8

ZOTAC ZBOX nano
14
4. Connecting to USB 2.0 devices
Connect USB 2.0 devices such as keyboards, mice, cameras and hard disk drives.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI
port on the system rear panel.
6. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port of the monitor or display.
7. Connecting a VGA display
Connect the VGA connector to the VGA port.
8. Connecting the power adapter and turning on the ZBOX nano
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
When your ZOTAC ZBOX nano is not in use, unplug the power adapter or switch off the
AC outlet to conserve power.

ZOTAC ZBOX nano
15
Positioning the ZOTAC ZBOX nano
• Do not position the ZOTAC ZBOX nano where the ventilation holes are covered. To guarantee
proper use, leave 4 inches (10 cm) of spacing in front of the ventilation holes.
• ZOTAC ZBOX nano mini-PC systems provide ample connectivity in a tiny form factor, please
choose connectors and cables in appropriate sizes to avoid interference.
Mounting the ZOTAC ZBOX nano to an LCD monitor
You can attach your ZOTAC ZBOX nano to the back of a VESA75/100 compliant monitor.
1. Secure the VESA mount to the LCD monitor using 4 screws (not included).
Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation.

ZOTAC ZBOX nano
16
2. Align the ZOTAC ZBOX nano mounting holes to the VESA mount attachment pegs.
Attach the ZOTAC ZBOX nano to the VESA mount and gently press down to secure the
ZBOX to the mount.
3. Connect the ZOTAC ZBOX nano to your LCD monitor with an VGA/HDMI/DP cable.

ZOTAC ZBOX nano
17
Installing drivers and software
Installing an operating system
The ZOTAC ZBOX nano does not ship with an operating system preinstalled. The user
must install the operating system before the ZOTAC ZBOX nano can be used. The following
operating systems are supported:
• Windows 10 64-bit
Follow the instructions below to install an operating system:
1. Attach external DVD drive via USB 3.0 or 2.0 ports.
2. Insert disk for operating system (Windows or Linux).
3. Wait for the ZOTAC ZBOX nano to boot from the disk.
4. Follow the onscreen directions to install the operating system.
5. Install system drivers to gain full functionality of the ZOTAC ZBOX nano hardware and
features.
Installing system drivers
Before you can use the full features of the ZOTAC ZBOX nano, the system drivers must be
installed. The following types of operating systems are supported by the ZOTAC ZBOX nano
driver DVD:
• Windows 10 64-bit
Follow the instructions below to install the
system drivers:
1. Insert the ZOTAC ZBOX nano driver DVD.
If autorun is enabled, the driver installation
main menu will show up automatically.
If autorun is disabled, you may click the
le Launch.EXE to bring up the driver
installation main menu.
2. The following drivers are available on the
DVD:
• Intel Chipset Driver
• HDA Sound Driver

ZOTAC ZBOX nano
18
• Intel Graphics Driver
• Intel serial io Driver
• Realtek Ethernet PCI-E Driver
• DPTF Driver
• Intel Trusted Execution Engine
• Bluetooth Driver
• CardReader Driver
• Wireless Network Driver
• USB Charger (optional)
Note: If you want to use high-amperage
USB charging for smartphones and tablets,
please install the driver USB Charger driver.
Each driver must be installed individually
to ensure proper operation of the ZOTAC
ZBOX nano.
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.
Using your ZOTAC ZBOX nano
Conguring a wireless connection
Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notication area.
2. Select the wireless network you want to connect to from the list
and click Connect.
3. After connection is established, you will see “Connected.”
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.

ZOTAC ZBOX nano
19
Using a dynamic IP (PPPoE connection)
1. Repeat Step 1-3 in the previous section.
2. Select “Obtain an IP address automatically” and click “OK”.
3. Click “Create a new
connection” to start the NEW
Connection Wizard.
4. Click “Next”.
5. Select “Connect to the
Internet” and click “Next”.
6. Select “Set up my
connection manually”.
7. Select your connection
type and click “Next”.
8. Enter your ISP Name and
click “Next”.
9. Enter your User name and
Password. Click “Next”.
Conguring a wired connection
Using a static IP
1. Right-click the network icon in the notication
area and select “Open Network Connections”.
2. Right-click “Local Area Connection” and
select “Properties”.
3. Highlight “Internet Protocol (TCP/IP)” and
click “Properties”.
4. Select “Use the following IP address”.
5. Enter your IP address, subnet mask and
Default gateway.
6. Enter the preferred DNS server address if
necessary.
7. After entering all of the related values, click “OK” to nish the conguration.