Zotac Zbox C Series User manual

ZOTAC ZBOX
1
ZOTAC ZBOX
User’s Manual
No part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into
any language in any form or by any means, except documentation kept by the pur-
chaser for backup purposes, without the express written permission of ZOTAC.
Products and corporate names mentioned in this manual may be registered trademarks
or copyrights of their respective companies, and are used for identication purposes
only. All trademarks are the property of their respective owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

ZOTAC ZBOX
2
Table of Contents
Product specications ----------------------------------------------------------------------------------------3
Safety information ----------------------------------------------------------------------------------------------4
Setting up your system-------------------------------------------------------------------------------------4
Care during use ----------------------------------------------------------------------------------------------4
Welcome -----------------------------------------------------------------------------------------------------------5
Package contents -------------------------------------------------------------------------------------------5
Getting to know your ZOTAC ZBOX ----------------------------------------------------------------------6
Front view -----------------------------------------------------------------------------------------------------6
Rear view ------------------------------------------------------------------------------------------------------7
Customizing the ZOTAC ZBOX ----------------------------------------------------------------------------8
Installing a memory module-------------------------------------------------------------------------------9
Removing the memory module --------------------------------------------------------------------------10
Installing M.2 SSD 2242 / 2280 module ---------------------------------------------------------------11
Setting up your ZOTAC ZBOX ------------------------------------------------------------------------------13
Positioning the ZOTAC ZBOX ------------------------------------------------------------------------------15
Mounting the ZOTAC ZBOX to an LCD monitor ----------------------------------------------------15
Installing drivers and software -----------------------------------------------------------------------------17
Installing an operating system----------------------------------------------------------------------------17
Installing system drivers -----------------------------------------------------------------------------------17
Using your ZOTAC ZBOX ------------------------------------------------------------------------------------18
Conguring a wireless connection ----------------------------------------------------------------------18
Conguring audio output-----------------------------------------------------------------------------------19

ZOTAC ZBOX
3
Product specications
Processor
• Intel Processor N4100 (quad core, 1.1 GHz , up to 2.4 GHz)
Onboard graphics
• Intel UHD Graphics 600
• HDMI 2.0a (max resolution: 4096×2160 @60Hz)
• DP 1.2 (max resolution: 4096×2160 @60Hz)
Memory support
• 2 x DDR4-2400 SODIMM Slots
• Up to 8 GB of memory
USB ports
• 1 x USB 3.0 Type-C port
• 2 x USB 3.0 ports
Storage support
• 1 x M.2 SATA SSD(22/42, 22/80)
• 1 x micro SDHC/SDXC card reader
Network support
• Dual Gigabit (10/100/1000Mbps) LAN
• IEEE 802.3 compatible
Wi-Fi support
• 802.11ac Wi-Fi (dual-band)
• Bluetooth 4.2
Onboard Audio
• Digital 8 Channel Audio (LPCM/bitstream via HDMI)
• Analog audio combo (CTIA) for headphone output/Microphone input
Operating System support
• Windows 10 64-bit
Product Dimensions
• 147.2mm x 147.2mm x 32.1mm

ZOTAC ZBOX
4
Safety information
Your ZOTAC ZBOX is designed and tested to meet the latest standards of safety for information tech-
nology equipment. However, to ensure your safety, it is important that you read the following safety
instructions.
Setting up your system
Read and follow all instructions in the documentation before operating your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface.
Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure
you leave plenty of space around the system for ventilation. Never insert objects of any kind into
the ventilation openings.
Use this product in environments with ambient temperatures between 0℃ and 35℃.
 If you use an extension cord, please use the UL listed cord and make sure that the total
ampere rating of the devices plugged into the extension cord does not exceed its ampere
rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled onto the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.

ZOTAC ZBOX
5
Welcome
Congratulations on your purchase of the ZOTAC ZBOX . The following illustration displays the pack-
age contents of your new ZOTAC ZBOX . If any of the below items is damaged or missing, contact
your retailer.
Package contents
• 1 x ZOTAC ZBOX
• 2 x VESA mount bracket (w/ screws)
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Antenna
• 1 x Support DVD(Optional)
• 1 x USB ash drive with OS drivers
• 1 x User Manual & Quick Start Guide
• 1 x Warranty Card

ZOTAC ZBOX
6
Getting to know your ZOTAC ZBOX
Front view
Refer to the diagram below to identify the components on the front of the ZBOX.
1. Power button
The power button turns the system ON and OFF.
2. MicroSD memory card slot
The built-in memory card reader supports Micro SDHC/SDXC cards to expand the storage
capabilities of the ZOTAC ZBOX.
3. USB 3.0 Type-C port
The type-C USB 3.0 port supports the SuperSpeed USB 3.0 devices. Use this port for USB
3.0 devices for maximum performance with USB 3.0 compatible devices.
4. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
5. Combo Headphone/Microphone jack (3.5mm)
The combo headphone/microphone jack (3.5mm) is used to connect the system’s audio out
signal to amplied speakers, 3-pole headphones or 4-pole CTIA headphones.
Note: The combo headphone/microphone jack does not support the traditional microphone.
1234
5

ZOTAC ZBOX
7
Rear view
Refer to the diagram below to identify the components on the back of the system.
1. WiFi antenna connector
The WiFi antenna connector supports the included WiFi antenna.
2. Ethernet ports
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area
networks (LAN) with speeds of 10/100/1000Mbps.
3. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
4. DisplayPort
DisplayPort supports both external (box-to-box) and internal (laptop LCD panel) display
connections.
5. HDMI port
The HDMI (High Denition Multimedia Interface) port supports a UHD device such as an LCD
TV or monitor to allow viewing on a larger external display.
6. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack supplies power to the PC. To prevent damage to the PC, always
use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
1
234 5
6
2

ZOTAC ZBOX
8
Customizing the ZOTAC ZBOX
Before installing hardware, please follow the instructions below to remove the cover of your
ZOTAC ZBOX .
1. Loosen the 4 screws securing the bottom cover.
2. Remove the bottom cover.

ZOTAC ZBOX
9
Installing a memory module
1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot
at a 45 degree angle.
2. Gently press down on the memory module until it locks into place by the arms of the
memory slot.
Note: This ZOTAC ZBOX accomodates two DDR4 SO-DIMM memory modules. You must install at least one module for
the system to function. PLUS / Windows models include memory pre-installed.

ZOTAC ZBOX
10
Removing the memory module
1. Locate the SO-DIMM memory slot and gently press the two arms securing the memory
module outwards, as shown in the image below, to release the memory module.
2. Remove the memory module from the slot at a 45-degree angle.

ZOTAC ZBOX
11
Installing M.2 SATA SSD 2242 / 2280 module
1. Locate the M.2 SSD slot and remove the screw.
2. Insert an M.2 SATA SSD module into the slot at a 45 degree angle.
3. Attach the screw to the M.2 SATA SSD module as shown below.
M.2 SATA SSD 2242: M.2 SATA SSD 2280:
M.2 SATA SSD 2242: M.2 SATA SSD 2280:

ZOTAC ZBOX
12
4. Gently press down on the M.2 SATA SSD module, and install the screw on board.
M.2 SATA SSD 2242:
M.2 SATA SSD 2280:
Note: PLUS / Windows models include SSD pre-installed.

ZOTAC ZBOX
13
Setting up your ZOTAC ZBOX
Please connect your peripherals before using your ZOTAC ZBOX
1. Connecting the WiFi antenna
Connect the WiFi antenna to the WiFi antenna connector.
2. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and the other
end to a network hub, switch or router.
3. Connecting to USB 3.0 devices
Connect USB 3.0 devices such as external hard disk drives, SSDs and ash drives to the USB
3.0 port on the system rear panel.
1
345
6
2
1
23456 2

ZOTAC ZBOX
14
4. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port of the monitor or display.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI
port on the system rear panel.
6. Connecting the power adapter and turning on the ZBOX
Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press
the power switch on the front panel to turn on the system.
When your ZOTAC ZBOX is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.

ZOTAC ZBOX
15
Positioning the ZOTAC ZBOX
• Do not position the ZOTAC ZBOX where the ventilation holes are covered. To guarantee
proper use, leave 4 inches (10 cm) of spacing in front of the ventilation holes.
• ZOTAC ZBOX mini-PC systems provide ample connectivity in a tiny form factor, please
choose connectors and cables in appropriate sizes to avoid interference.
Mounting the ZOTAC ZBOX to an LCD monitor
You can attach your ZOTAC ZBOX to the back of a VESA75/100 compliant monitor.
1. Secure the VESA mount brackets to the bottom cover using 4 screws.
Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation.
2. Install the VESA mount attachment pegs to the LCD monitor.

ZOTAC ZBOX
16
3. Align the ZOTAC ZBOX mounting holes to the VESA mount attachment pegs, and gently
press down to secure the ZBOX to the mount.
4. Connect the ZOTAC ZBOX to your LCD monitor with an HDMI/DP cable.

ZOTAC ZBOX
17
Installing drivers and software
Installing an operating system
The ZOTAC ZBOX does not ship with an operating system preinstalled. The user must install
the operating system before the ZOTAC ZBOX can be used. The following operating systems
are supported:
• Windows 10 64-bit
Follow the instructions below to install an operating system:
1. Attach external DVD drive via USB 3.0 ports
2. Insert disk for operating system (Windows or Linux).
3. Wait for the ZOTAC ZBOX to boot from the disk.
4. Follow the onscreen directions to install the operating system.
5. Install system drivers to gain full functionality of the ZOTAC ZBOX hardware and
features.
Installing system drivers
Before you can use the full features of the ZOTAC ZBOX, the system drivers must be installed.
The following types of operating systems are supported by the ZOTAC ZBOX driver DVD and
USB ash drive:
• Windows 10 64-bit
Follow the instructions below to install the
system drivers:
1. Insert the ZOTAC ZBOX driver DVD
or driver USB ash drive. If autorun is
enabled, the driver installation main menu
will show up automatically. If autorun is
disabled, you may click the le
Launch.EXE to bring up the driver
installation main menu.
2. The following drivers are available on the
DVD and USB ash drive:

ZOTAC ZBOX
18
• Intel Chipset Driver
• HDA Sound Driver
• Intel Graphics Driver
• Intel serial io Driver
• Realtek Ethernet PCI-E Driver
• DPTF Driver
• Intel Trusted Execution Engine
• Bluetooth Driver
• Wireless Network Driver
• CardReader Driver
Each driver must be installed individually to ensure proper operation of the ZOTAC ZBOX .
3. Select the driver you want to install. The driver installer should launch.
4. Follow the onscreen instructions to install the drivers.
5. Restart the system.
Using your ZOTAC ZBOX
Conguring a wireless connection
Please follow the instructions below to connect to a wireless network:
1. Double-click the wireless network icon (pic) in the notication
area.
2. Select the wireless network you want to connect to from the list
and click Connect.
3. After connection is established, you will see “Connected.”
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.

ZOTAC ZBOX
19
Conguring audio output
Follow the steps below to enable audio output when connecting the ZOTAC ZBOX to a TV or
receiver via DP/HDMI adapter.
1. Access the Sound settings via the system Control
Panel.
2. Under Playback devices, click the display device
that corresponds with your audio compatible
display.
3. Click the “Set Default” button in the lower right
hand corner.
4. Click “OK” to exit the setup.