Zotac ZBOX PRO ZP-CI330NANO User manual

1
ZP-CI330NANO
User’s Manual
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of ZOTAC.
Products and corporate names mentioned in this manual may be registered trademarks
or copyrights of their respective companies, and are used for identication purposes
only. All trademarks are the property of their respective owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

2
Table of Contents
Specications ----------------------------------------------------------------------------------------------------3
Safety instructions----------------------------------------------------------------------------------------------5
Package contents -----------------------------------------------------------------------------------------------6
Getting to know your ZP-CI330NANO --------------------------------------------------------------------7
Front view -----------------------------------------------------------------------------------------------------7
Rear view ------------------------------------------------------------------------------------------------------8
Installing hardware inside ZP-CI330NANO -------------------------------------------------------------9
Installing an M.2 SSD module----------------------------------------------------------------------------14
Installing a memory module-------------------------------------------------------------------------------16
Installing a hard disk drive---------------------------------------------------------------------------------18
Installing the L-shaped mountings------------------------------------------------------------------------20
Installing your ZP-CI330NANO to a monitor -----------------------------------------------------------21
Setting up your ZP-CI330NANO ----------------------------------------------------------------------------23
Installing drivers and software -----------------------------------------------------------------------------25
Installing an operating system----------------------------------------------------------------------------25
Installing system drivers -----------------------------------------------------------------------------------25
Using your ZP-CI330NANO ----------------------------------------------------------------------------------26
Conguring wireless connection -------------------------------------------------------------------------26
Conguring audio output-----------------------------------------------------------------------------------27

3
Specications
Microprocessor Support •Intel Celeron N3160, Quad-core 1.6 Ghz/2.24 Ghz, 2 MB
cache
Operating Systems •Supports Windows 10 64-bit
Onboard Graphics Support •Intel HD Graphics 400
•HDMI 1.4 (max resolution: 3840x2160 @30Hz,
2560x1600 @60Hz)
•VGA (max resolution: 1920x1200 @60 Hz)
System Memory Support •Two DDR3L 1600 SO-DIMM slots
•Up to 8 GB of memory
USB Ports •One USB 3.0 port
•Two USB 2.0 ports
Onboard Serial ATA •SATA 6.0 Gb/s transfer rates
•Supports one 2.5-inch SATA III HDD/SSD bay
(support the device with max 9.5mm height)
Expansion Slot •One M.2 2242/2260 key-M socket for SSD
Card Reader •SD/SDHC/SDXC
Onboard Dual Gigabit LAN •Supports 10/100/1000 Mbps operation
•Supports IEEE 802.3
WiFi Support (optional) •802.11ac Wi-Fi (dual-band)
H/W watchdog timer •Timeout value = 1 ~ 255, Unit = minute/second
Case Dimension •160.0mm x 126.7mm x 50.7 mm

4

5
Safety instructions
ZP-CI330NANO is designed and tested to meet the latest standards of safety for information
technology equipment. However, to ensure your safety, it is important that you read the following
safety instructions.
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system alone
without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert objects of
any kind into the ventilation openings.
Use this product in environments with ambient temperature on below conditions:
Main unit: -20°C - +40°C
AC adapter: +0°C ~ +40°C
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.

6
Package contents
Thank you for choosing our ZP-CI330NANO. The following illustration displays the package contents
of your new ZP-CI330NANO. If any of the below items is damaged or missed, contact your retailer.
• 1 x ZP-CI330NANO
• 1 x L-shaped mounting kit
• 1 x VESA mounting kit
• 1 x AC Adapter
• 1 x Power Cord
• 1 x WiFi Antenna
• 1 x USB ash drive
• 1 x User’s manual (soft copy)

7
Getting to know your ZP-CI330NANO
Front view
1. Power button
The power button turns the mini-PC ON and OFF.
2. Power LED
The Power LED is always ON when power is on.
3. SATA status LED
The SATA LED blinks when data is being written onto or read from the SATA.
4. Wi-Fi status indicator
The Wi-Fi LED is always ON when data is being transfered over Wi-Fi.
5. Memory card reader
The built-in memory card reader reads SD/SDHC/SDXC cards used in devices such as digital
cameras, MP3 players, mobile phones and PDAs.
6. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio output signal to
amplied speakers or headphones.
7. Microphone input
The microphone input is designed to connect a microphone for video conferencing, voice
narrations or simple audio recordings.
8. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices and is backwards compatible
with USB 2.0/1.1 devices. Use the ports for USB 3.0 devices for maximum performance with
USB 3.0 compatible devices.
2 3 4
1
6 75
8

8
Rear view
1
2
345
6
1. VGA port
The VGA port supports connection to analog monitors and displays.
2. WiFi antenna connector
The WiFi antenna connector supports the included WiFi antenna.
3. Ethernet port
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area
networks (LAN) with speeds of 10/100/1000Mbps.
4. USB 2.0 ports
The USB (Universal Serial Bus) port is compatible with USB devices such as keyboards, mice,
cameras and hard disk drives.
5. HDMI ports
The HDMI (High Denition Multimedia Interface) port supports a UHD device such as an LCD
TV or monitor to allow viewing on a larger external display.
6. Display continuity switch
Press the display continuity switch to pretend HDMI display is always connected (HPD always
pulled high).
7. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack supplies power to the PC. To prevent damage to the PC, always
use the supplied power adapter.
The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
7

9
Installing hardware inside ZP-CI330NANO
Before installing hardware, please follow the instructions below to remove the cover of your
ZP-CI330NANO.
1. Remove the four screws of L-shaped mounting kit.
2. Remove the L-shaped mounting kit.