Zotac ZBOX PRO QK5P1000 User manual

1
ZP-QK5P1000
User’s Manual
No part of this manual, including the products and software described in it, may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means, except documentation kept by the
purchaser for backup purposes, without the express written permission of ZOTAC.
Products and corporate names mentioned in this manual may be registered trademarks
or copyrights of their respective companies, and are used for identication purposes
only. All trademarks are the property of their respective owners.
Every effort has been made to ensure that the contents of this manual are correct and
up to date. However, the manufacturer makes no guarantee regarding the accuracy of
its contents, and reserves the right to make changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries should be
recycled where possible. Disposal of used batteries must be in accordance with local
environmental regulations.

2
Table of Contents
Specications ----------------------------------------------------------------------------------------------------3
Safety instructions----------------------------------------------------------------------------------------------5
Package contents -----------------------------------------------------------------------------------------------6
Getting to know your ZP-QK5P1000 ----------------------------------------------------------------------7
Front view -----------------------------------------------------------------------------------------------------7
Rear view ------------------------------------------------------------------------------------------------------8
Installing hardware inside ZP-QK5P1000 ---------------------------------------------------------------9
Installing an M.2 SSD module----------------------------------------------------------------------------13
Installing a memory module-------------------------------------------------------------------------------16
Installing a hard disk drive---------------------------------------------------------------------------------17
Installing the L-shaped mountings------------------------------------------------------------------------20
Installing your ZP-QK5P1000 to a monitor -------------------------------------------------------------21
Setting up your ZP-QK5P1000 ------------------------------------------------------------------------------22
Installing drivers and software -----------------------------------------------------------------------------24
Installing an operating system----------------------------------------------------------------------------24
Installing system drivers -----------------------------------------------------------------------------------24
Using your ZP-QK5P1000 ------------------------------------------------------------------------------------25
Conguring wireless connection -------------------------------------------------------------------------25
Conguring audio output-----------------------------------------------------------------------------------26

3
Specications
Microprocessor Support •7th gen Intel Core i5-7300U Dual-core 2.6 GHz/3.5 GHz,
3 MB cache, 15 W TDP
Operating Systems •Supports Windows 10 64-bit
Onboard Graphics Support •NVIDIA Quadro P1000 for Embedded GPU w/4GB GDDR5
•4x HDMI2.0 (max resolution: 3840x2160 @60Hz)
System Memory Support •Two DDR4L 2133 SO-DIMM slots
•Up to 32 GB of memory
USB Ports •Three USB 3.0 port
Onboard Serial ATA •SATA 6.0 Gb/s transfer rates
•Supports one 2.5-inch SATA III HDD/SSD bay
(support the device with max 9.5mm height)
Expansion Slot •One M.2 2242 key-M socket for SSD
Card Reader •SD/SDHC/SDXC
Onboard Dual Gigabit LAN •Supports 10/100/1000 Mbps operation
•Supports IEEE 802.3
WiFi Support (optional) •802.11ac Wi-Fi (dual-band)
•Bluetooth 4.2
H/W watchdog timer •Timeout value = 1 ~ 255, Unit = minute/second
Legacy I/O •RS232 serial port
Case Dimension •210.0mm x 176.6mm x 44.4mm

4

5
Safety instructions
ZP-QK5P1000 is designed and tested to meet the latest standards of safety for information technology
equipment. However, to ensure your safety, it is important that you read the following safety instructions.
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system alone
without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert objects of
any kind into the ventilation openings.
Use this product in environments with ambient temperature on below conditions:
Main unit: -20°C - +40°C
AC adapter: +5°C ~ +35°C
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always unplug all
power, modem, and network cables from the power outlets before cleaning the system.
If you encounter the following technical problems with the product, unplug the power cord and
contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.

6
Package contents
Thank you for choosing our ZP-QK5P1000. The following illustration displays the package contents of
your new ZP-QK5P1000. If any of the below items is damaged or missed, contact your retailer.
• 1 x ZP-QK5P1000
• 1 x L-shaped mounting kit
• 1 x AC Adapter
• 1 x Power Cord
• 2 x WiFi Antenna
• 1 x USB ash drive
• 1 x User’s manual (soft copy)

7
Getting to know your ZP-QK5P1000
Front view
1. Power button
The power button turns the system ON and OFF.
2. Hard disk LED
The hard disk LED blinks when data is being written onto or read from the hard disk drive.
3. WiFi LED
The WiFi LED blinks when data is being transfered over WiFi.
4. USB 3.0 port
The USB 3.0 port supports the SuperSpeed USB 3.0 devices. Use this port for USB 3.0
devices for maximum performance with USB 3.0 compatible devices.
5. Memory card slot
The Memory card slot is compatible with SD/SDHC/SDXC cards used in devices like digital
cameras, MP3 players, mobile phones and PDAs.
6. Microphone jack
The microphone jack is designed to connect a microphone for video conferencing, voice
narrations or simple audio recordings.
7. Headphone/Audio Out jack
The stereo headphone jack (3.5mm) is used to connect the system’s audio output signal to
amplied speakers or headphones.
5
2 3 4 167

8
Rear view
1234 5 6 73
1. COM port
Use the COM port to connect serial devices such as mouse of fax/modems.
2. Power input (DC19.5V)
The supplied power adapter converts AC power to DC power for use with this power port. To
prevent damage to the mini-PC, always use the supplied power adapter.
3. WiFi antenna connectors
The WiFi antenna connector supports the included WiFi antenna.
4. Optical (SPDIF OUT) jack
The optical S/PDIF output enables connectivity with digital audio receivers and speakers for
crystal clear digital audio and surround sound from compatible soundtracks.
5. Ethernet ports
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area
networks (LAN) with speeds of 10/100/1000Mbps.
6. USB 3.0 ports
The USB 3.0 port supports the SuperSpeed USB 3.0 devices. Use this port for USB 3.0
devices for maximum performance with USB 3.0 compatible devices.
7. HDMI ports
The HDMI (High Denition Multimedia Interface) port supports a UHD device such as an LCD
TV or monitor to allow viewing on a larger external display.
The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.

9
Installing hardware inside ZP-QK5P1000
Before installing hardware, please follow the instructions below to remove the cover of your
ZP-QK5P1000.
1. Remove the ve screws of front cover.
2. Remove the front cover.