Zotac ZBOX series User manual

1
ZOTAC ZBOX nano
ZOTAC ZBOX nano
User’s Manual
No part of this manual, including the products and software described in it,
may be reproduced, transmitted, transcribed, stored in a retrieval system,
or translated into any language in any form or by any means, except
documentation kept by the purchaser for backup purposes, without the
express written permission of ZOTAC.
Products and corporate names mentioned in this manual may not be
registered trademarks or copyrights of their respective companies, and are
used for identication purposes only. All trademarks are the property of their
respective owners.
Every effort has been made to ensure that the contents of this manual are
correct and up to date. However, the manufacturer makes no guarantee
regarding the accuracy of its contents, and reserves the right to make
changes without prior notice.
CAUTION:
Risk of explosion if the battery is replaced with an incorrect type. Batteries
should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.

2
ZOTAC ZBOX nano
Table of Contents
Product specications -------------------------------------------------------------------------- 3
Safety information -------------------------------------------------------------------------------- 4
Setting up your system ----------------------------------------------------------------------- 4
Care during use -------------------------------------------------------------------------------- 4
Welcome --------------------------------------------------------------------------------------------- 5
Package contents ------------------------------------------------------------------------------ 5
Getting to know your ZOTAC ZBOX nano ------------------------------------------------ 6
Front view ---------------------------------------------------------------------------------------- 6
Rear view----------------------------------------------------------------------------------------- 7
BIOS settings of specic functions--------------------------------------------------------- 8
How to disable the ring LED indicator ---------------------------------------------------- 8
How to disable integrated IR receiver----------------------------------------------------- 9
Customizing the ZOTAC ZBOX nano ------------------------------------------------------- 11
Installing a memory module ----------------------------------------------------------------- 12
Installing a hard disk -------------------------------------------------------------------------- 13
Installing mSATA SSD modules ------------------------------------------------------------ 14
Connecting a S/PDIF cable------------------------------------------------------------------ 16
Setting up the ZOTAC ZBOX nano ---------------------------------------------------------- 17
Positioning the ZOTAC ZBOX nano--------------------------------------------------------- 19
Mounting the ZOTAC ZBOX nano to a LCD monitor---------------------------------- 19
Installing drivers and software --------------------------------------------------------------- 21
Installing an operating system -------------------------------------------------------------- 21
Installing system drivers---------------------------------------------------------------------- 21
Using your ZOTAC ZBOX nano--------------------------------------------------------------- 22
Conguring wireless connection ----------------------------------------------------------- 22
Conguring wired connection --------------------------------------------------------------- 22
Using a static IP ---------------------------------------------------------------------------- 22
Using a dynamic IP (PPPoE connection) -------------------------------------------- 23
Conguring audio output via an HDMI device ------------------------------------------ 23
ZOTAC nanoRAID User Manual -------------------------------------------------------------- 24
Legacy mode------------------------------------------------------------------------------------ 24
Setting up the BIOS ----------------------------------------------------------------------- 24
Entering the RAID BIOS utility---------------------------------------------------------- 25
Creating a RAID array -------------------------------------------------------------------- 25
Deleting a RAID array -------------------------------------------------------------------- 26
uEFI mode --------------------------------------------------------------------------------------- 27
Creating a RAID array -------------------------------------------------------------------- 28
Deleting a RAID array -------------------------------------------------------------------- 29

3
ZOTAC ZBOX nano
Product specications
Product Dimensions
• 127mm x 127mm x 45mm
Onboard CPU
• 4th Gen Intel Core i3/i5/i7 Processor
Onboard graphics
• Intel HD Graphics 4400
• HDMI & DP output
Memory support
• One 204-pin DDR3L-1600/1333 SO-DIMM slot (1.35V)
• Up to 8 GB of memory
USB ports
• Two USB 2.0 ports & four USB 3.0 ports
Storage support
• SATA 6.0 Gb/s transfer rates
• Supports one 2.5-inch SATA HDD/SSD (9.5mm max height) or dual mSATA SSD
via bundled nanoRAID adapter
• One eSATA port
Network support
• Gigabit (10/100/1000Mbps) LAN
• IEEE 802.3 compatible
WiFi/BT support
• Compliant with IEEE802.11ac standard
• High speed wireless connection up to 433 Mbps
• Fully qualied Bluetooth v4.0
Audio
• 2-channel high-denition audio
• Jack-sensing compatible
• Optical SPDIF
Operating System support
• Windows 7 & Windows 8
• 32-bit and 64-bit support

4
ZOTAC ZBOX nano
Safety information
Your ZOTAC ZBOX nano is designed and tested to meet the latest standards of safety for
information technology equipment. However, to ensure your safety, it is important that you
read the following safety instructions.
Setting up your system
Read and follow all instructions in the documentation before you operate your system.
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable surface with the provided stand. Never use the system
alone without the stand.
Openings on the chassis are for ventilation. Do not block or cover these openings.
Make sure you leave plenty of space around the system for ventilation. Never insert
objects of any kind into the ventilation openings.
Use this product in environments with ambient temperatures between 0℃and 35℃.
If you use an extension cord, please use the UL listed cord and make sure that
the total ampere rating of the devices plugged into the extension cord does not
exceed its ampere rating.
Care during use
Do not walk on the power cord or allow anything to rest on it.
Do not spill water or any other liquids on your system.
When the system is turned off, a small amount of electrical current still ows. Always
unplug all power, modem, and network cables from the power outlets before cleaning
the system.
If you encounter the following technical problems with the product, unplug the power
cord and contact a qualied service technician or your retailer.
¾The power cord or plug is damaged.
¾Liquid has been spilled into the system.
¾The system does not function properly even if you follow the operating instructions.
¾The system was dropped or the cabinet is damaged.
¾The system performance changes.
,

5
ZOTAC ZBOX nano
Welcome
Congratulations on your purchase of the ZOTAC ZBOX nano mini-PC. The following
illustration displays the package contents of your new ZOTAC ZBOX nano. Please contact
your retailer If any of the below items are damaged or missed.
Package contents
• 1 x ZOTAC ZBOX nano mini-PC
• 1 x nanoRAID adapter
• 1 x ZOTAC VESA mount
• 4 x Mount screws
• 1 x AC Adapter
• 1 x Power Cord
• 1 x Headphone/SPDIF adapter
• 1 x WiFi antenna
• 1 x User Manual
• 1 x Quick Start Guide
• 1 x Support DVD

6
ZOTAC ZBOX nano
Getting to know your ZOTAC ZBOX nano
Front view
Refer to the diagram below to identify the components on this side of the system
1. Power switch
The power switch turns the mini-PC ON and OFF.
2. HDD status indicator
The hard disk LED blinks when data is being written onto or read from the hard
disk drive
3. WiFi status indicator
The WiFi LED blinks when data is being transfered over WiFi.
4. IR receiver
The IR receiver is used to receive signals from the IR remote control.
5. Memory card slot
The built-in memory card reader reads and writes MMC/SD/SDHC/MS/MS Pro/
xD/SDXC cards used in devices such as digital cameras, MP3 players, mobile
phones and PDAs.
6. Headphone / mini-Optical S/PDIF jack
The headphone / mini-Optical SPDIF jack (3.5mm) is used to connect the
system’s audio output to amplied speakers or headphones. It supports mini-
Optical S/PDIF output with the included mini-Optical S/PDIF adapter. The optical
S/PDIF output enables connectivity with digital audio receivers and speakers for
crystal clear digital audio and surround sound from compatible soundtracks.
7. USB 2.0 ports
The USB (Universal Serial Bus) ports are compatible with USB devices such as
keyboards, mice, cameras and hard disk drives.
8. Microphone jack
The microphone jack is designed to connect a microphone for video conferencing,
voice narrations or simple audio recordings.
Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it away from your body.
Note 2: Due to the unique tool-less customizable design, some connectors are placed upside down.
1
2
3
4
5
6
7
8

7
ZOTAC ZBOX nano
Rear view
Refer to the diagram below to identify the components on this side of the system.
1. Power input (DC19V)
The supplied power adapter converts AC power to DC power for use with this
jack. Power supplied through this jack supplies power to the mini-PC. To prevent
damage to the mini-PC, always use the supplied power adapter.
2. HDMI output
The HDMI (High Denition Multimedia Interface) output supports 4K (4096*2304
@24Hz) displays such as an HDTV or monitor.
3. DisplayPort
The DisplayPort output supports displays with resolutions up to 3200*2000
@60Hz.
4. USB 3.0 ports
The USB 3.0 port supports SuperSpeed USB 3.0 devices and is backwards
compatible with USB 2.0/1.1 devices. Use this port for USB 3.0 devices for
maximum performance with USB 3.0 compatible devices.
5. Ethernet port
The eight-pin RJ-45 LAN port supports standard Ethernet cable for connection to
a local area network (LAN) with speeds of 10/100/1000Mbps.
6. eSATA port
The external SATA port is compatible with e.SATA devices such as external hard
drives and Blu-ray drives.
7. WiFi antenna connector
The WiFi antenna connector supports the included WiFi antenna.
8. Ventilation area
The ventilation area is vital for proper system cooling. Do not cover.
1
2
3
4
5 6
4
8
7

8
ZOTAC ZBOX nano
How to disable the ring LED indicator
1. Turn on the ZBOX nano mini-PC, then press <Delete> to enter the BIOS
SETUP UTILITY.
2. Use the arrow keys to navigate to the Power menu and select Logo
indicator.
BIOS settings of specic functions
The ZOTAC ZBOX nano has specic functions that can be enabled or disabled in the
BIOS settings such as LED indicator, and integrated IR receiver.

9
ZOTAC ZBOX nano
3. Press <Enter> and select Turn Off.
4. Press F10 to save the conguration and exit. The PC will reboot.
How to disable integrated IR receiver
1. Use the arrow keys to navigate to Features > OnBoard Device Control, and
select CIR Controller.

10
ZOTAC ZBOX nano
2. Enter CIR Controller and select Disabled.
Enabled: enable the internal IR receiver (default)
Disabled: disable the internal IR receiver
3. Press F10 to save the conguration and exit.

11
ZOTAC ZBOX nano
Customizing the ZOTAC ZBOX nano
Before installing hardware, please follow the instructions below to remove the cover
of your ZOTAC ZBOX nano.
1. Remove the four screws securing the bottom cover into place.
2. Locate side with engraving that says “Pull Upward.” Pull upward on the cover
as shown below

12
ZOTAC ZBOX nano
Installing a memory module
1. Locate the SO-DIMM memory slot and insert a SO-DIMM memory module
into the slot at a 45 degree angle.
2. Gently press down on the memory module until it locks into place by the arms
of the memory slot.

13
ZOTAC ZBOX nano
2. Install the hard disk bracket onto a 2.5-inch SATA hard disk with 2 screws.
3. Insert the hard disk into the socket and gently slide into the connector.
Installing a hard disk
1. Locate the hard disk bracket, remove the 2 screws, and remove the hard disk
bracket as shown in the image below.

14
ZOTAC ZBOX nano
4. Reinstall the screws for the hard disk bracket.
Installing mSATA SSD modules
1. Install the HDD bracket on the nanoRAID adapter with two screws.

15
ZOTAC ZBOX nano
2. Insert an mSATA SSD into the slot at a 45 degree angle.
3. Gently press down on the mSATA SSD with one nger and ensure that the
mSATA SSD is installed completely.
4. Insert the mSATA SSD bracket into the HDD slot at a 45 degree angle.

16
ZOTAC ZBOX nano
Connecting a S/PDIF cable
1. Connect the S/PDIF cable to the mini-Optical S/PDIF adapter.
2. Locate the front panel and connect the mini-Optical S/PDIF adapter to the
headphone / mini-Optical S/PDIF jack.

17
ZOTAC ZBOX nano
Setting up the ZOTAC ZBOX nano
Please connect your peripherals before using your ZOTAC ZBOX nano.
1. Connecting a DisplayPort display
Connect the DisplayPort connector to the DP port.
2. Connecting USB 3.0 device
Connect USB 3.0 devices such as external hard drives, SSDs and ash drives to
the USB 3.0 port.
3. Connecting the WiFi antenna module
Connect the included WiFi antenna to the WiFi antenna connector.
1
2
3

18
ZOTAC ZBOX nano
4. Turning on the system
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
5. Connecting to an HDMI display
Connect one end of an HDMI cable to the HDMI port on the system rear panel
and the other end to a HDMI-compatible display such as an HDTV or monitor.
(When both the HDMI and the DP are connected, the audio output is from HDMI
by default.)
6. Connecting to a network device
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
7. Connecting an eSATA device
Connect the eSATA cable to the eSATA port.
Note: When your ZOTAC ZBOX nano is not in use, unplug the power adapter or switch off the AC outlet
to conserve power.
456
7

19
ZOTAC ZBOX nano
Positioning the ZOTAC ZBOX nano
• Do not position the ZOTAC ZBOX nano where the ventilation holes are covered. To
guarantee proper use, leave 4 inches (10 cm) of spacing in front of the ventilation
holes.
• ZOTAC ZBOX nano mini-PC systems provide ample connectivity in a tiny form
factor, please choose connectors and cables in appropriate sizes to avoid
interference.
Mounting the ZOTAC ZBOX nano to a LCD monitor
You can attach your ZOTAC ZBOX nano to the back of a VESA75/100 compliant
monitor.
1. Secure the VESA mount to the LCD monitor using 4 screws (not included).
Disclaimer: ZOTAC cannot be held liable for damages resulting from an improper installation.
2. Align the ZOTAC ZBOX nano mounting holes to the VESA mount attachment
pegs. Attach the ZOTAC ZBOX nano to the VESA mount and gently press down
to secure the ZBOX to the mount.