Zte RSU82 S1900 Manual

RSU82S1900
HardwareInstallation
ZTECORPORATION
No.55,Hi-techRoadSouth,ShenZhen,P .R.China
Postcode:518057
Tel:[phone]
Fax:[phone]
URL:http://support.zte.com.cn
E-mail:[email protected]

LEGALINFORMATION
Copyright©2017ZTECORPORATION.
Thecontentsofthisdocumentareprotectedbycopyrightlawsandinternationaltreaties.Anyreproductionor
distributionofthisdocumentoranyportionofthisdocument,inanyformbyanymeans,withoutthepriorwritten
consentofZTECORPORATIONisprohibited.Additionally,thecontentsofthisdocumentareprotectedby
contractualcondentialityobligations.
Allcompany,brandandproductnamesaretradeorservicemarks,orregisteredtradeorservicemarks,ofZTE
CORPORATIONoroftheirrespectiveowners.
Thisdocumentisprovided“asis”,andallexpress,implied,orstatutorywarranties,representationsorconditions
aredisclaimed,includingwithoutlimitationanyimpliedwarrantyofmerchantability,tnessforaparticularpurpose,
titleornon-infringement.ZTECORPORATIONanditslicensorsshallnotbeliablefordamagesresultingfromthe
useoforrelianceontheinformationcontainedherein.
ZTECORPORATIONoritslicensorsmayhavecurrentorpendingintellectualpropertyrightsorapplications
coveringthesubjectmatterofthisdocument.ExceptasexpresslyprovidedinanywrittenlicensebetweenZTE
CORPORATIONanditslicensee,theuserofthisdocumentshallnotacquireanylicensetothesubjectmatter
herein.
ZTECORPORATIONreservestherighttoupgradeormaketechnicalchangetothisproductwithoutfurthernotice.
UsersmayvisittheZTEtechnicalsupportwebsitehttp://support.zte.com.cntoinquireforrelatedinformation.
TheultimaterighttointerpretthisproductresidesinZTECORPORATION.
RevisionHistory
RevisionNo.RevisionDateRevisionReason
R1.12016-03-23V4.14.10.30.P30
Thistopichasbeenmodied:
FloorMountingtheCabinet，modifythedimensionsoftheBase
andExpansionBoltPositions
R1.02015-05-22Firstedition
SerialNumber:SJ-20150203110107-011
PublishingDate:2016-03-23(R1.1)
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Contents
AboutThisManual.........................................................................................I
Chapter1InstallationFlow........................................................................1-1
Chapter2InstallationPreparation............................................................2-1
2.1T echnicalDocuments.........................................................................................2-7
2.2Precautionsforcabinettransport.........................................................................2-7
2.3InstallationPrecautions.......................................................................................2-7
Chapter3UnpackingandInspection.......................................................3-1
Chapter4CabinetInstallation...................................................................4-1
4.1CabinetInstallationProcess................................................................................4-1
4.2FloorMountingtheCabinet.................................................................................4-3
4.3InstallingStackedCabinets...............................................................................4-16
Chapter5ComponentInstallationinaCabinet.......................................5-1
5.1InstallinganRFUnitintheRC8910ACabinet(Optional).......................................5-1
5.2InstallingBatteries..............................................................................................5-2
Chapter6InstallingtheGPSAntenna(Optional)....................................6-1
Chapter7CableInstallation......................................................................7-1
7.1CablingOverview...............................................................................................7-1
7.2Cable-ThroughHoles.........................................................................................7-6
7.3WaterproofModuleDescription...........................................................................7-9
7.3.1WaterproofModuleoftheBasebandCabinet.............................................7-9
7.3.2WaterproofModuleoftheRFCabinet.......................................................7-11
7.4GroundingCableInstallation.............................................................................7-12
7.4.1InstallingaGroundingCablefortheBC8910ACabinet............................7-13
7.4.2InstallingaGroundingCablefortheRC8910ACabinetandPC8910A
Cabinet................................................................................................7-16
7.5PowerCableInstallation...................................................................................7-18
7.5.1PowerCableInstallationintheBCCabinet..............................................7-21
7.5.2PowerCableInstallationintheRCCabinet..............................................7-25
7.5.3InstallingDCInputCablesforthePC8910ACabinet................................7-26
7.5.4InstallingaFanPowerCableforthePC8910ACabinet............................7-29
7.5.5InstallingthePowerCableoftheHeater(Optional)...................................7-32
7.5.6InstallingthePowerCableforaRemoteRRU(Optional)..........................7-34
I
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

7.6TransmissionCableInstallation.........................................................................7-35
7.6.1InstallingTransmissionFibers(Optional)..................................................7-36
7.6.2InstallingEthernetCables(Optional)........................................................7-38
7.7SignalCableInstallation...................................................................................7-40
7.7.1InstallinganInterconnectedCableBetweenBBUandRSU.......................7-40
7.7.2InstallingOutdoorFibers(Optional).........................................................7-43
7.7.3InstallingtheGPSFeeder.......................................................................7-45
7.7.4InstallingAntennaFeederJumpers.........................................................7-47
7.7.5InstallingtheAISGCable(Optional)........................................................7-49
7.8MonitoringCableInstallation.............................................................................7-50
7.8.1InstallingtheRSUMonitoringCable........................................................7-52
7.8.2InstallingDry-ContactCablesExternallyProvidedbytheBaseband
Cabinet................................................................................................7-54
7.8.3ConnectingaBatteryTemperatureMonitoringCableforthePC8910A
Cabinet...............................................................................................7-57
7.8.4InstallingaDoorAccessMonitoringCableforthePC8910ACabinet........7-59
7.8.5InstallingtheWaterLevelMonitoringCableofaPC8910ACabinet............7-61
7.9WaterproofModuleInstallation..........................................................................7-63
7.9.1InstallingtheWaterproofModulefortheBC8910ACabinet.......................7-63
7.9.2InstallingtheWaterproofModulefortheRC8910ACabinet.......................7-63
7.10InstallingtheAirFilter.....................................................................................7-64
Chapter8Post-InstallationCheck............................................................8-1
8.1CabinetInstallationCheck..................................................................................8-1
8.2ModuleInstallationCheck...................................................................................8-2
8.3CableInstallationCheck.....................................................................................8-2
8.4OtherChecks.....................................................................................................8-3
Chapter9PoweringontheCabinet..........................................................9-1
Chapter10Closure...................................................................................10-1
Figures.............................................................................................................I
Tables.............................................................................................................V
Glossary.......................................................................................................VII
II
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

AboutThisManual
Purpose
TheBS8900Aisanintegratedoutdoormacrobasestationthatconsistsofthe
BBUandRSU82S1900.Inaddition,spaceisreservedforthebuilt-inpowersupplyand
batteryinthecabinet,realizinganintegrateddevicewiththebasestation,powersupply,
andbattery.Thismanualdescribeshowtoinstallthecabinet,modules,andcablesofthe
BS8900A.
IntendedAudience
Thismanualisintendedfor:
lInstallationengineers
lMaintenanceengineers
WhatIsinThisManual
Thismanualcontainsthefollowingchapters.
Chapter1,InstallationFlowDescribestheinstallationowoftheZXSDRBS8900A.
Chapter2,Installation
Preparation
Describespreparationsbeforeequipmentinstallation.
Chapter3,Unpackingand
Inspection
Describesprecautionsaboutequipmentunpackingandinspection.
Chapter4,CabinetInstallationDescribeshowtoinstallthecabinetoftheZXSDRBS8900A.
Chapter5,Component
InstallationinaCabinet
DescribeshowtoinstalltheRSUandbatteryoftheZXSDR
BS8900A.
Chapter6,InstallingtheGPS
Antenna(Optional)
DescribeshowtoinstalltheGPSantennaonthetopofthecabinet.
Chapter7,CableInstallationDescribeshowtoinstallthecablesoftheZXSDRBS8900Aon
site.
Chapter8,Post-Installation
Check
Describeshowtocheckthedeviceafterequipmentinstallation.
Chapter9,Poweringonthe
Cabinet
DescribeshowtopowerontheZXSDRBS8900A.
Chapter10,ClosureDescribestheclean-upoperationsafterequipmentinstallation.
Conventions
Thismanualusesthefollowingconventions.
I
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ItalicsVariablesincommands.Itmayalsorefertootherrelatedmanualsanddocuments.
BoldMenus,menuoptions,functionnames,inputelds,optionbuttonnames,checkboxes,
drop-downlists,dialogboxnames,windownames,parameters,andcommands.
Constant
width
Textthatyoutype,programcodes,lenames,directorynames,andfunctionnames.
[]Optionalparameters.
{}Mandatoryparameters.
|Separatesindividualparametersinaseriesofparameters.
Danger:indicatesanimminentlyhazardoussituation.Failuretocomplywillresultin
deathorseriouspersonalinjury.
Warning:indicatesapotentiallyhazardoussituation.Failuretocomplycanresultin
deathorseriouspersonalinjury.
Caution:indicatesapotentiallyhazardoussituation.Failuretocomplycanresultin
moderateorminorpersonalinjury.
Notice:indicatesequipmentorenvironmentsafetyinformation.Failuretocomply
canresultinequipmentdamage,dataloss,equipmentperformancedegradation,
environmentalcontamination,orotherunpredictableresults.
Note:providesadditionalinformationaboutatopic.
II
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Chapter1
InstallationFlow
FortheinstallationowoftheZXSDRBS8900A,seeFigure1-1.
Figure1-1ZXSDRBS8900AInstallationFlow
1-1
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ZXSDRBS8900AHardwareInstallation
Thispageintentionallyleftblank.
1-2
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Chapter2
InstallationPreparation
Table2-1showstoolsandmetersrequiredduringinstallation.
Table2-1ToolsandMeters
Cate-
gory
NameExample
Feederconnectorknife
75Ωcoaxialcablestripper
Multi-functionalcrimpingpliers
Multimeter
Standingwaveratiotester
Special-
purpose
tools
Earthresistancetester
2-1
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ZXSDRBS8900AHardwareInstallation
Cate-
gory
NameExample
Hammerdrill
Auxiliarypercussiondrillbits
Vacuumcleaner
Punch-
ingtools
Powerstrip(providingatleastthree
two-phasesocketsandthreethree-phase
sockets,withthecurrentcapacitylarger
than15A)
Phillipsscrewdrivers(4",6"and8"each)
Flatheadscrewdrivers(4",6"and8"each)
Adjustablewrenches(6",8",10"and12"
each)
Dual-purposewrenches(17"and19"each)
Socketwrenches
Paperknife
5kgclawhammer
General-
purpose
tools
2-2
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Chapter2InstallationPreparation
Cate-
gory
NameExample
Irons(300Wand40Weach)
Inner-hexagonwrench
Solderwires
50m(164feet)tapemeasure
5m(16feet)steeltape
Angleinstrument
Mea-
sure-
ment
tools
2-3
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ZXSDRBS8900AHardwareInstallation
Cate-
gory
NameExample
Compass
Levelbar
Plumb
Antistaticwriststrap
slip-proofgloves
Protec-
tiontools
Safetyhelmet
Hacksaw(withseveralsawblades)
sharp-nosepliers(8")
diagonalpliers(8")
Clamp
tools
2-4
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Chapter2InstallationPreparation
Cate-
gory
NameExample
round-nosepliers(8")
Pincerpliers(8")
Needleles(medium-sized)
Nippers
Paintbrush
Scissors
Airheater
Solderremovaltool
Hydrauliccrimper
Crowbar
2-5
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ZXSDRBS8900AHardwareInstallation
Cate-
gory
NameExample
Pulleyset
Rope
Auxiliary
tools
Ladder
Spectrumanalyzer(requiredincertain
specialcases)
BTStester
Meters
Fieldstrengthtester(requiredincertain
specialcases)
TableofContents
TechnicalDocuments.................................................................................................2-7
Precautionsforcabinettransport................................................................................2-7
InstallationPrecautions..............................................................................................2-7
2-6
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Chapter2InstallationPreparation
2.1TechnicalDocuments
ItisnecessarytopreparethefollowingtechnicaldocumentsforZXSDRBS8900A
installation:
lZXSDRBS8900AIntegratedOutdoorLTEMacroeNodeBProductDescription
lZXSDRBS8900AIntegratedOutdoorLTEMacroeNodeBHardwareDescription
2.2Precautionsforcabinettransport
lAcabinetmustbetransportedwiththeouterpackingcontainertoprotectthecabinet
fromscratches.
Caution!
Youmusttransportacabinetinapackingcontainer.
lAfterthepackingcontainerisremovedonsite,thecabinetmustbeprotectedwhen
youmoveorstoreit.Forexample,whenacabinetisstoredtemporarily,cushioning
materialsmustbeputunderthebottomofthecabinettoavoiddirectcontactwiththe
groundandsurroundingobjects.
lWhenyoutransportacabinet,usemachinesrst.Whenyouliftacabinetup,the
cabinetmustbedraggedproperlytoavoidcollisionwithotherobjects.
lIfacabinethastobetransportedwithoutpackingduetoenvironmentrestrictions,
cushioningmaterialssuchasfoamedplasticandpaperboardmustbeusedtoprotect
thecabinetfromscratches.
2.3InstallationPrecautions
Thefollowingprecautionsshouldbeabidedbyduringtheinstallation:
lTheZXSDRBS8900Ahardwareinstallationpersonnelmustparticipateinthetraining
relatedtocommunicationequipmentinstallationtomasterinstallationskills.
lDuringtheinstallation,ensurethepersonalsafetyandavoidaccidentssuchaselectric
shockorbruise.
lTheinstallationpersonnelshouldwearanantistaticwriststrapwheninsertingand
pullingoutboards.Ensurethattheotherendoftheantistaticwriststrapisgrounded
well.
lWhentakingaboard,takeholdoftheedgeoftheboardanddonottouchthecircuit,
components,andwires.
lInstallboardsalongslotsandavoidcontactingadjacentboardstoavoidshortcircuit.
Giveproperforcetoinstalltheboardstoavoidpindistortion.
lWheninstallingormaintaininganopticalber,donotdirectlystareatthesectionof
opticalberoranopticalsocketincasethatlaserbeamshurtyoureyes.
2-7
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ZXSDRBS8900AHardwareInstallation
lTheequipmentmustbepoweredonwithin24hoursafterthepackageisopened.
Power-offcannotexceed24hoursinmaintenance.
2-8
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Chapter3
UnpackingandInspection
CountingGoods
lVerifythatthepackagingboxesareintact.Ifanydamageisfound,contactthe
transportcompanyimmediately.
lUnpacktheboxesandverifythatthegoodsareconsistentwiththeinspection
checklist.
lVerifythatthechassisisingoodconditionwithoutscratches,peelingpaint,blisters,
orstains.
lVerifythattheaccessoriesrequiredfortheinstallationarecorrectandcomplete.
EquipmentHandover
Aftertheexaminationofgoods,theengineeringsupervisorandtheoperator's
representativeshouldsigntheUnpackingAcceptanceReport.TheUnpackingAcceptance
Reportismadeinduplicate,andkeptbybothparties.Theengineeringsupervisormust
sendtheUnpackingAcceptanceReportbacktotherepresentativeofcewithinseven
daysforarchiving.
3-1
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ZXSDRBS8900AHardwareInstallation
Thispageintentionallyleftblank.
3-2
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

Chapter4
CabinetInstallation
TheZXSDRBS8900Aisanoutdoordevicethatisdirectlyoor-mounted.Itcanbeinstalled
atahillorroof.Ingeneral,asimplefenceorhouseisrequiredaroundthebasestation
wheretheequipmentisinstalledinthehillorunderatower.
Aconcreteplatformneedstobesetupbeforethecabinetinstallationtoprotectthebase
stationequipmentandensurethenormalusageofthecommunicationsequipment.
TheZXSDRBS8900Ahasthreetypesofcabinets,thebasebandcabinet(BCcabinet),RF
cabinet(RCcabinet),andbatterycabinet(PCcabinet).Thesecabinetscanbestackedor
installedsidebyside.Thelower-layercabinetinthestackedcabinetinstallationmodeis
RC8910AorPC8910A.Theupper-layercabinetinthestackedcabinetinstallationmodeis
BC8910A.Thebasedoesnotaccompanythedeliveryofthesecabinets.Thebaseneeds
tobeinstalledbeforetheoor-mountedcabinetinstallation.
TableofContents
CabinetInstallationProcess.......................................................................................4-1
FloorMountingtheCabinet........................................................................................4-3
InstallingStackedCabinets......................................................................................4-16
4.1CabinetInstallationProcess
FlowforFloor-MountingaCabinet
Fortheowforoor-mountingtheZXSDRBS8900Acabinet,seeFigure4-1.
4-1
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential

ZXSDRBS8900AHardwareInstallation
Figure4-1FlowforFloor-MountingaCabinet
Note:
Ifaoor-mountedcabinetneednotbestackedwithanothercabinetonitstop,the
oor-mountedcabinetneedstobeinstalledwiththetopcover.
FlowforStackingCabinets
Inthestackedcabinetinstallation,youjustneedtostackanothercabinetontothetopof
theoor-mountedcabinet.Fortheinstallationow,seeFigure4-2.
4-2
SJ-20150203110107-011|2016-03-23(R1.1)ZTEProprietaryandCondential