Zte CruiseConnect User manual

1
ZTE CruiseConnect™
Quick Start Guide
Application Powered by Modus®

2
Getting to Know Your OBD II Device
Appearance
The following figure is for your reference only.
1. Reset hole
2. micro-SIM card slot
3. Restart key
4. LED 1
5. LED 2
6. OBD interface

3
Getting to Know Your OBD II Device
Indicator lights
Indicator Status Description
LED 1(Power)
Green
blinking
Powered by the internal
battery.
Green
solid
Powered by the vehicle
battery.
LED 2(Signal)
Red
solid
Turn on but not register.
Green
solid
Registered to the 4G
network.
Green
blinking
Connected to the 4G LTE
network and data is being
transferred.
NOTE:
The charging temperature should be lower than 45℃.
.

4
Installing the micro-SIM card
1. Use the tray eject tool to take out the card tray.
2. Put the micro-SIM card into the card tray and slip it into the
card slot.
WARNING!
To avoid damage to the device, please do not use other kinds of
SIM cards, and do not use a non-standard micro-SIM card cut
from a SIM card. You can get the standard micro-SIM card from
your service provider.
3. Close the micro-SIM card cover.

5
Installing Your OBD II Device
1. Make sure your vehicle is parked outside in a safe location
and the engine is turned off.
2. Find your vehicle’s On-Board Diagnostics (OBD II) connector
port.
NOTES:
The OBD II port is usually located under the driver’s dash
side of your car, often within 18 inches of the steering
wheel (as 1 to 8 shown in the following picture).
Write down the Wi-Fi SSID and Password information.
If you’re having trouble locating your car’s OBD II port,
reference your vehicle’s manual.
3. Plug your device into the vehicle’s OBD II port.

6
Activating your device
1. Start the engine.
2. Check the device indicator after 2-5 minutes.
3. Green LED 2 indicates your device is activated successfully.

7
Create your account
1. Download the “CruiseConnect” app available in iTunes or
Google Play.
2. Click on ‘Sign Up’ on the main screen of the app.
3. Enter your name, Cell Number, Email address and Continue.

8
4. The system will send your cell phone a 6-digit
authorization code to confirm your phone number is valid.
Enter this code to continue.
5. Scan the QR code located on a reference card in the
device box.

9
6. The system will attempt to connect to the device for 90
seconds.
7. Once completed you will receive a success message and hit
continue to enter into the application.

10
Using Your Wi-Fi Service
1. Find your OBD II device's network name in your Wi-Fi
device's list of available wireless networks.
2. Select the Wi-Fi name (SSID) of your OBD II device. (You can
check the label on the device to get the default Wi-Fi SSID
and password.)
3. Input the password, and then tap Connect.

11
LEGAL INFORMATION
Copyright © 2017 ZTE CORPORATION.
All rights reserved.
No part of this publication may be quoted, reproduced,
translated or used in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without the
prior written permission of ZTE Corporation.
Notice
This guide is published by ZTE Corporation. We reserve the
right to make modifications on print errors or update
specifications without prior notice. Every effort has been made
in the preparation of this guide to ensure accuracy of the
contents, but all statements, information, and
recommendations in this guide do not constitute a warranty of
any kind, expressed or implied.

12
We offer self-service for our smart terminal device users.
Please visit the ZTE official website (at www.zteusa.com) for
more information on self-service and supported product
models. Information on the website takes precedence.
Disclaimer
4G LTE is not available in all areas. See uscellular.com/4G for
complete coverage details. 4G LTE service provided through
King Street Wireless, a partner of U.S. Cellular. LTE is a
trademark of ETSI.
ZTE Corporation expressly disclaims any liability for faults and
damages caused by unauthorized modifications of the software.
Images and screenshots used in this guide may differ from the
actual product. Content in this guide may differ from the actual
product or software.
Trademarks
ZTE and the ZTE logos are trademarks of ZTE Corporation.

13
WARNING: This product contains a chemical known to the
State of California could cause cancer, birth defects or other
reproductive harm.
Version No.: R1.5
Edition Time: Sept 25, 2017
Manual No.: