Zte U.S. Cellular Home Phone User manual

1

2
Contents
Getting to Know Your Device...............4
Appearance......................................................................................4
LED Indicator .................................................................................5
Device Installation...................................6
Before You Begin............................................................................6
Installing the Battery.......................................................................6
Installing the Power Adapter...........................................................8
Connecting the Device to a Phone ..................................................8
Turning on Your Device..................................................................9
Checking the Wireless Signal..........................................................9
Using Your Device.................................10
Making Calls.................................................................................10
Receiving Calls .............................................................................10
Three-Way Calling........................................................................10
Voice Mail..................................................................................... 11
Call Waiting................................................................................... 11
Call Forwarding ............................................................................ 11
Immediate Call Forwarding..................................................12
Busy Call Forwarding............................................................12
No Answer Call Forwarding .................................................13
Adjusting Volume..........................................................................13

3
TTY Support .................................................................................14
Frequently Ask Question.....................15
Troubleshooting.....................................18
Specification...........................................19
Safety Notes............................................20
RF Exposure Information....................22
FCC Regulations....................................23

4
Getting to Know Your Device
Appearance
NOTE:
Service Port is designed for diagnostic purposes only, not for customer
use. Never place a USB-based device into the USB port of the device
under any circumstance. Doing so may damage the device and negate
its warranty.

5
LED Indicator
Key
Icon Name
Status
Condition
Power
Green
ON
Off
No Power
Voicemail
Green
New message
Off
No message
Battery Charge
Green
High
Yellow
Medium
Red
Low
Blink
Charging
Signal Strength
Green
Strong
Yellow
Moderate
Red
No Service
Blink
Roaming

6
Device Installation
Before You Begin
Your device works exclusively with the U.S. Cellular®network and
DOES NOT use your home’s phone wall jacks.
Your device should be located:
Where you have a strong cellular signal from a cell tower,
typically near a window or outside wall.
Near an electrical wall outlet.
Installing the Battery
1. Remove the cover from the battery compartment.

7
2. Insert the battery connection cable into the battery port.
3. Place the battery in the battery slot and replace the battery
cover.
NOTES:
The system will stop charging the battery when the ambient
temperature is outside of the temperature range allowed for
charging (0 °C ~ 55 °C).
When the power adapter is connected, the battery will
automatically be charged.
When fully charged, the battery will automatically stop charging.
Remove the battery if the device will be unused for a long period.

8
The battery is intended for backup purposes only (in the event of
a power failure).
The device takes about 5 hours to charge fully. The charge time
may be impacted by environmental factors.
Installing the Power Adapter
1. Plug the power adapter into an electrical wall outlet.
2. Insert the small end of the power adapter into the Power port on
the back of your device.
Connecting the Device to a Phone
1. Unplug your phone from the wall jack.
2. Plug your phone into the “Phone 1”port on your U.S. Cellular®
Home Phone, using your existing phone cable or included phone
cable.
IMPORTANT: DO NOT plug the U.S. Cellular®Home Phone into a wall
jack.

9
NOTE:
The “Phone 2”port can be used to connect an additional phone.
This port uses the same telephone number as the “Phone 1”port.
Put the device at least 2.5 meters away from the connected
phone, TV sets, radio and other electronic devices to avoid
electromagnetic interference.
Turning on Your Device
Press and hold the power button about 8 seconds until the signal
strength light comes on.
Checking the Wireless Signal
1. Raise antenna to an upright position.
2. Confirm signal strength light is green for optimal performance.
NOTE: If there is a yellow light,
please change the installation
location.

10
Using Your Device
Making Calls
1. Before making a call, make sure that the wireless signal is strong.
2. Lift the handset of your home phone, enter the telephone number
(0~9*#). The number will be dialed automatically.
3. When your call is finished, hang up your home phone or return the
phone to its base to ensure that you can receive calls.
NOTE：
When first using this device, please dial *228 and wait 4 seconds or
*228# to enable it.
Receiving Calls
When the home phone rings, lift the handset or press Hands-Free to
answer the incoming call.
Three-Way Calling
While on an existing call, press the Flash key on your phone or dial the