ZTOZZ HEIMA User manual




















*you will need a Phillips-head screwdriver (not included)





x1 x1
x1
x1
x1




x1 x1
 

x1

backrest
sleeper cushion rollout storage back cushion
stopper railarmrest 2
armrest 1
throw pillow
hex key

x8 x8
x4
x2
x4
1/4"x 1/"
x2
x2 2" x 1"
1/4"x 1⁄"
hex bolts self-tapping screws plastic washer
legswheels Bwheels A
self-tapping screws
3/8"3/16" x 1⁄"











Take the pre-assembled rollout drawer and sleeper
cushion out of the carton. Follow the red string and
you’ll nd the hardware pack and the throw pillows
inside the drawer. Fold the drawer back into the original
position and place the assembly vertically as shown.













Screw in the wheels A (part G) using
2 x D self tapping screws with the
Phillips-head screwdriver.
Screw in the wheels B (part H) using
2 x E self tapping screws with the
Phillips-head screwdriver.








Make sure to fold the drawer into a sleeper cushion
and place the assembly horizontally so that the wheels
are facing downward.
Take out both armrests and place them as pictured.
Please position the center of the leg (part I) 1,6" from
the edge of the armrest and attach the legs using the
E self-tapping screws as shown.















Attach the stopper rail onto the
armrests using 2 x C bolts on each
armrest with the provided hex key.
Please make sure the stopper hooks
are positioned as in illustration.
Place the armrests and stopper
assembly into a regular position,
connect the back cushion (6)
onto the pins on the inner side
of each armrests with the plastic
washer in between.



















Unfold the hook and loop tape on
both corners in the back of the
backrest and secure the backrest
onto both armrests using
4 x C bolts and the hex key.
Place the sleeper assembly into the sofa base, gently roll it over the
stopper rail until both wheels are on the inside of stoppers, you will
hear a distinct «click» sound.

