Zumimall MUBVIEW BELL-J7 User manual

Thanks for your shopping and trust.
We have been optimizing our products and improve
our lifetime customer service to offer you a better
shopping experience. If you have any problems,
please feel free to send us an E-mail. We will solve
your problems within 24 hours. In addition, your
advice or suggestions will be much appreciated
and welcomed.
Register via link below to get 3 Years Warranty
Extension.
http://bit.ly/zuReg
Product Service
Email: [email protected]
Distributor: [email protected]
More About Us
Web: www.zumimall.com
Facebook: www.facebook.com/zumimalloffice
Amazon Store: www.amazon.com/zumimall
Warranty Service

Brand Story
Founded in 2008, Zumimall focuses on the
design and research of intelligent security
technology. Zumimall insists on taking consumer
needs as its core and strives to create smart home
products that lead a global home fashion trend for
consumers. Zumimall believes that craftsmanship
creates top quality and technology changes life.
With high-quality products and first-class service,
Zumimall won the love and trust of millions of
customers as soon as it went public. Over the years,
Zumimall has served 45 continents of America,
covering 80% of the population. Zumimall is the
provider of a smart lifestyle and a guardian of the
wonderful moments of your life.

INDEX PAGE
1. What’s in the Box ------------------------P1
2. Meet the Doorbell -----------------------P2
3. Meet the Chime ------------------------P3
4. Download and Install App ----------------P4
5. Account Registration --------------------P5
6. Add Camera to App --------------------P5
6.1 Preparations for Connection ------------P5
6.2 Connect Camera to App --------------P6
7. Charge your doorbell --------------------P8
8. Set up Doorbell -------------------------P9
9. Pair With Your Indoor Chime --------------P10
10. Install Your doorbell ---------------------P12
11. Tamper Alarm -------------------------P14
12. Product Specifications ------------------P15

Doorbell * 1
DingDong *1
Quick User Guide *1
USB Cable *1
Screws Set/Screwdriver *1
3M Tape *2
1. What’s in the Box
NOTE: Micro SD card and power adapter are not included.
1

2
2. Meet the Doorbell
Camera ON/Off Switch
Reset Button
Memory Card
Slot
Speaker
PIR Motion Sensor
Microphone
Doorbell Button
LED Indicator
Charging Indicator
Micro USB Port
(for battery charging) Security Screw
Li-ion Battery
Built-in
Doorbell comes with a 4,500mAh rechargeable Li-ion battery.

3
3. Meet the Chime
Settings
Volume Control
Select Ringtone
Blue indicator
Red indicator
AA Batteries
Please mind the battery polarities while installing the batteries.

4
Download ZUMIMALL App from Google Play™ or
App Store™. Or scan the QR codes as below, with your
smart phone.
NOTE: Google Play™ is a trademark of Google Inc.
App Store™ is a service mark of Apple Inc.
NOTE: Please turn on both of the following permissions.
①Allow ZUMIMALL App to access mobile cellular data
and wireless LAN, otherwise it will fail to connect the
camera.
②Allow ZUMIMALL App to receive pushed messages,
otherwise, the phone will not receive alarms when
motion is detected.
4. Download and Install App
ZUMIMALL AndroidiOS
>
>
<
Notifications
ZUMIMALL
ALERTS
Allow Notifications
9:41
Lock Screen
Banner Style
Sounds
Badges
OPTIONS
When Unlocked(Default)
Show Previews
Temporary
>
>
Automatic
Notification Grouping
>
NotificationCenter Banners
5:51
<
ZUMIMALL
Wireless Data
ALLOW”WIRELESS DATA”TO USE DATA
Off
WLAN
WLAN & Cellular Data
5:51

5
New user needs to sign up ZUMIMALL App with email
address. Click 'Sign up' to create a New Account and
follow the steps to complete registration.
5. Account Registration
6. Add Camera to App
6.1 Preparations for connection
①Insert a Micro SD Card into the camera to save video
clips or you can start the 7-day free cloud service.
Without Micro SD Card or cloud service, no video will
be saved.
②The camera only works with 2.4GHz Wi-Fi,
not support 5GHz.
③When connecting to the network, please take the
camera close to the router
(Recommended within 10-15ft).
Step 1
5:51
Log in
Forgot password?Remember password
Welcome
United States
Account
Passward
No account yet? Sign up now
Step 3
5:51
<
[email protected]
Account
Nickname
Password
Password: 8-16 digits, including two types of
numbers,upper or lower case letters and
characters at least
Sign Up
Done
Step 2
5:51
<
Registration means agreement with the user
agreement and privacy agreement.
Sign Up
United States
Email
Next

6
6.2 Connect Camera to App
Tap 'Add Device'
Reset the Camera Input Wi-Fi Password Prepare the Scanning
Select 'Battery Camera' Turn on the Camera
Home
Homepage Messages Search
5:48
All Devices
Me
Living room Bedroom
Add Device
Quick Guide
5:48
Battery
Camera
Smart
Doorbell
Smart Video Doorbell
Power Plug
Camera
Baby
Camera
Floodlight
Camera
Doorbell
Kits
Select Device
5:49
Add Battery Camera
Press the [battery camera] button to
wake the device if it is asleep.
Hold the device power button to start
the device.
<
Please stay near to your router for the
best signal.
Next
Press the [Bell] button, and tap Next
5:49
Install Doorbell
<
Next
5:50
Wi-Fi Setup
SELECT A 2.4GHZ WIFI NETWORK AND
ENTER Your Password
The Device Does Not Work with 5G Wifi NetWorks
Common Router Setup Methods
Junan
cam2019@
<
Next
Please remove all film from the lens.Tap
Next to show a QR code, and let your
device scan the code. Keep your phone
5-8 inches from the lens.
5:50
Operation Instructions
<
15-25cm
5-8 in
Next

7
5:50
Scan QR Code
<
Scan the QR code below with the device
at a distance of 5-8 inches. A tone will be
heard when successfully scanned.
Next
Help
Scan QR Code when Indicator
Flashing Slowly in Red Finished Installation When Reaches 100%
5:50
Connect Network
<
Make sure the device in an
energized state
02:06
Make sure the device is connected to
the router
Make sure the device and the phone are
on the same network
Search device Register to the cloud Device
initialization
Perform Network Diagnosis View Installation Tips
5:50
Network Diagnostic Skip
<
WIFI signal strength
High
Current Place is good, you can install
the camera.
02-15-2022 11:08:17 AM
6KB/s
Next
5:50
How to install camera
Install tips:
<
1.Please use outdoor mounting bracket if you
want to install camera outside.
2.It is recommended to install the camera at a
height of 2-3 meters.
3.Avoid direct sunlight to the camera lens.
4.Avoid placing the camera lens against the
wall and glass at close range.
Done

Prior to the doorbell installation, please charge up your
doorbell for about 8-10 hours till the charging LED turns
BLUE from RED.
Solid red
USB compatible mobile phone charger (DC 5V 1A~2A).
Battery charging
Fully chargedSolid blue
7. Charge your doorbell
LED STATUS
Compatible charger (not provided):
INDICATION
8

9
LED Indicator
ON/Off Switch
Switch on power for your doorbell, and you will see
the LED indicator flashes red (once per second).
Start setting up your doorbell following the in-app
instructions.
· Please operate the setup near your Wi-Fi router.
· Make sure your phone is connecting to a 2.4GHz Wi-Fi.
· Make sure the doorbell is turned on, and its indicator
LED is flashing red. If not, press and hold RESET for 5
seconds.
· Ensure the Wi-Fi signal is good, and the Wi-Fi
password is correct.
Tips
8. Set up Doorbell
Solid red Device is abnormal.
Ready for Wi-Fi configuration.
Connecting to Wi-Fi
Device is online
LiVe-viewing doorbell cam
Firmware upgrading
Flash red (once/sec)
Flash red (twice/sec)
Solid blue
Flash blue (once/sec)
Flash blue (twice/sec)
LED STATUS INDICATION

10
Settings
Chime rings &
indicator flashes blue
Click the SETTING button on the chime, and the
chime will be in pairing mode for 20 seconds,
with its red LED flashing.
Press the doorbell button to send a pairing signal,
and your chime will sound to react, together with its
blue LED flashing. Chime pairing succeeds.
9. Pair With Your Indoor Chime

11
Chime settings.
Settings.
Click to enter/quit pairing mode;
Press & hold for 5 seconds to restore factory
defaults.
Volume control button.
Click to control volume:
level 1: 110 dB; level 2: 100 dB
level 3: 90 dB; level 4: 80 dB
Ringtone selection.
Click to change ringtone (4 ringtones available).

12
Select location for your doorbell.
10. Install Your doorbell
(OPTIONAL) Install at an angle.
You can purchase the following angled brackets so
as to point your doorbell to a specific view angle.
25 to 50 degree
angle adjustable
8 degree stackable
wedge mount unit
Wedge Mount
(Not included)
Corner Mount
(Not included)
It is suggested to mount the
doorbell at least 4 feet (120
cm) above the ground for
optimal angle of view and
best motion detection
performance.
Select a location.

13
Standard installation.

14
11. Tamper Alarm
Anti-theft Tamper Alarm.
You can also enable the anti-theft alarm in doorbell
settings.
Tamper Alarm On
With tamper alarm on, your doorbell detects
disassembly by the trigger on its back, and then a
30-second siren alarm will be triggered. Meantime,
video recording get started, and alarm notification
will be pushed to the owner’s APP account.
Tamper Alarm Off
You can disable the tamper alarm in doorbell
settings, and detach the doorbell without any alarm
for battery recharge or regular maintenance.
Tamper Alarm
Trigger

15
Camera 2.0MP Full-HD Camera
Effective pixels 1920(H) x 1080(V)
IR LED High power dot-array IR LED x 1
View angle 145°
Motion detect range 100° (Max 5m)
Motion sensitivity 5 level sensitivity settable
Alarm trigger Call button, motion detect, anti-theft alarm
Wi-Fi 2.4 ~ 2.4835 GHz WIFI (IEEE802.11b/g/n)
Video recording Video clips against events
Audio Full duplex 2-way audio
Storage SD card (Max. 128G)
Cloud storage Yes (7-days-free trial)
Power supply Built-in rechargeable Li-ion battery
Battery capacity 4,500mAh
Ingress protection IP65
Operating Temp. -10℃ to 50℃
Dimensions 34.5 x 56 x 134.6mm
Net weight
Power source 1
Power source 2 AA LR6 1.5V battery x 3 units
Consumption 0.4W
Ringtones 4 ringtones optional
Connection type Radio frequency 433MHz
Place of use Indoor
Blue LED flashing Pairing mode
Red LED flashing Working normally
Blue LED flashing twice Reset factory default succeeds
Working Temp. -10℃ ~ 50℃
Humidity <90%, no condensation
Dimension 75.5 x 75 x 28mm
Weight 70g (Exclude batteries)
125.8g (Battery Included)
DC 5V 1A (from Micro USB)
12. Product Specifications
Video Doorbell Model No.:Bell J7
Wireless Chime Model No.: Chime06