Zvetco Biometrics Verifi FingerTouch Security User manual

Start Here
Quick Installation
Guide
Windows XP
Fast User Switching
Compatible
QAS 097 022505 PG1 RA
IMPORTANT.
Always install the Software
prior to Hardware Installation
WATERPROOF
Verifi

NOTE: Fingerprint verification performance is dependent upon
how well you enroll your fingerprint.
Correct use of the readers finger guide increases the repeatability of
fingerprint placement. This will enhance fingerprint authentication.
About the Reader
Proper Use of the Fingerprint Reader
PROPER FINGER PLACEMENT
Finger is flat to surface and
centered in fingered guide.
IMPROPER FINGER PLACEMENT
Finger is not flat to surface and not
placed in fingered guide.
Multi-factor Authentication
Verifi ID Manager supports: password,fingerprint, smart cards, and
tokens for authentication. Passwords and Fingerprints are covered in
this guide. See help guide for other authentication methods. About the Reader | 1

About the Reader | 2
The fingerprint enrollment process consist of multiple placements of the
finger to acquire several images for fingerprint template creation. Placing
the core of your fingerprint in the center of the active sensor area increases
the quality of the fingerprint enrollment.
Slight variations in the placement of the core are acceptable BUT NOT
BENEFICIAL to fingerprint enrollment.
Consistent placement of your fingerprint core in the center of the sensor will
give maximum performance.
Fingerprint
Core: Center of
finger swirl
patterns placed
in sensor area.
GOOD
IMAGE
No Fingerprint
Core: No core
found from
extreme
placement of
finger.
POOR
IMAGE

NOTE for Manual CD-ROM
If Easy Install Wizard does not start up automatically, select
your CD-ROM drive from “My Computer”and double-click
on the file named “Setup”on the CD-ROM.`
1.1 Make sure you are logged on to a Windows Account with
ADMINISTRATOR PRIVILEGES.
1.2 Shut down any programs that are running on your computer. Do not
connect the Fingerprint Reader at this time.
1.3 Insert the Verifi Identity Manager Software CD. The Easy Install Wizard
screen will automatically appear on your screen.
1.4 You will see the Install Wizard’s
welcome screen.Click “Next”.
1.5 Read and follow installation
instructions.
1.6 Restart your PC.
1. Install
Run the Easy Install Wizard Software
Make sure you have the
f
ollowing
:
I
nsta
ll
ation
So
f
tware CD
F
ingerprin
t
R
eader
Win
d
ows 200
0
o
r Windows XP
I
nternet
Ex
p
lorer 6.0
Install | 3
Next

2.1 Log on with User Name and Password for your Windows Account.
(Note: this account does not need Administrator Privileges.)
2.2 If the Registration Wizard welcome
screen automatically starts proceed to
step 2.3. For all others,Click on
Verifi ID “icon” or “bubble”to initiate
creating your Verifi Identity. Log on with
the same User Name and Password as in
step 2.1. This has now synchronized your Windows Account and Verifi
Identity and will not be required during future logons.
2.3 Upon the Registration Wizard’s welcome
screen. PLEASE INSTALL THE FINGER
PRINT READER INTO AN AVAILABLE USB
PORT AT THIS TIME. Windows should
automatically recognize your new
hardware. If it does not, follow the
Windows hardware installation Wizard
for manual hardware setup.
2.4 Upon successful hardware recognition Click
“Next”on the Verifi ID Registration Wizard to continue.
Fingerprint Reader Installation
If manual Windows hardware installation is
required,the drivers for the Reader are located
on the Verifi Identity Manager CD. Setup | 4
2. Setup
Setup for Verifi Identity Manager
Next

3. Enroll
Fingerprint Enrollment
3.1 Your password has automatically been
registered as a Verifi ID logon method.
To register your fingerprint select the
fingerprint icon and Click :Next”
3.2 The right index finger has been
selected by default, now PLACE AND
HOLD this right index finger on the
fingerprint sensor.
3.3 Your fingerprint image will appear on
the screen. Once the task bar indicates
a successful image capture, lift your
finger from the fingerprint sensor.
3.4 Repeat this process of placing your
finger and lifting until the task bar
reaches 100%.
Enroll | 5
Choosing different fingers
The enrollment wizard will default for the right
index and right middle fingers. However, all
fingers are available for enrollment.
Next

Begin Using !
Start Using | 6
Finish
Congratulations! You have finished installing the Verifi
Fingertouch Security system.
To test, log off and then back on to your Windows account
using your fingerprint.
Now you can enjoy logging on to Windows,Web sites, and
programs with just a touch of your finger.
See Help guide for instructions on using the many new
features of your Fingertouch system.
ATTENTION WINDOWS XP FAST USER SWITCHING:
When using Windows XP Fast User Switching an
additional password block will be required during
the first fingerprint logon attempt. Providing this
password synchronizes your Windows Account with
your new Identity and will not appear during
subsequent logons.
3.5 A second finger will now be prompted
for enrollment. Place and hold your
right middle finger.
3.6 Repeat place and hold until task bar
reaches 100%.
3.7 Click “Finish”

www.everifi.com
2005 Zvetco Biometrics. All rights reserved. All trademark names are registered trademarks of
respective manufacturers listed.
ZVETCO Tech Support
For technical support and
questions please email or call:
[email protected]om
407-681-0112
ZVETCO Sales
For further Sales information
please email or call:
[e-mail]
407-681-0042
Zvetco Biometrics
6820 Hanging Moss Rd
Orlando, FL 32807
407-681-0111
QAS 097
5205-006190
WATERPROOF
Verifi