ZYNAFLO HYDROGEN WATER GENERATOR User manual

INSTRUCTION MANUAL
HYDROGEN WATER
GENERATOR
BYZYNAFLO

High hydrogen concentration.
Patented cross-mesh electrodes using Solid Polymer Electrolyte (SPE)
membrane by DuPont® (USA).
Separates and expels harmful by-products like chlorine, ozone and oxides
Electrode plates made from Titanium and coated with Platinum; Titanium is
non-toxic and Platinum is non-reactive, hence it will not rust.
Cup body is made from food grade Polycarbonate that is 200x stronger than
glass to prevent breakage.
Light and portable - ideal for home, office and travel.
Uses USB Type-C for fast charging and ease of connection.
One-click easy operation.
Key Features
Parts

The delicate SPE membrane needs to be moist at all times for optimum
hydrogen production. Thus the hydrogen bottle is shipped with some
water in the generator beneath the silicone cap.
DO NOT pour boiling water, carbonated drinks, alcohol, tea, coffee or
water above 140°F (60°C) into the bottle as it will cause damage to the
membrane.
IMPORTANT INFORMATION:
Before First Use
Remove the orange silicone plug.
Fill the bottle with water and let it soak for 30 mins to moisten the SPE
membrane. If the membrane has completely dried up during transit
please let it soak for 24 hours. (NOTE: It takes about 2 weeks for
hydrogen generation to reach full production potential)
Pour water away and rinse with clean water.
Fully charge hydrogen device using USB cable provided.
To Operate
1. Fill bottle with clean drinking water. (For highest hydrogen concentration fill
to the top of the bottle just below the pressure relief vent).
2. Press and hold the power button for 2 secs to activate hydrogen production.
Device will stop automatically after 5 mins followed by 3 beeps to alert you that
hydrogen production is complete.
3. Drink it as soon as possible. Dissolved hydrogen dissipates quickly.
4. During hydrogen generation, if for some reason you need to turn it off before
the cycle ends, simply hold the power button for 3 secs. (This step is not
required for normal operation)
NOTE: This device operates at high pressure. DO NOT activate more than
twice continuously as extreme pressure buildup will damage the
membrane and electrolytic cell.

How Much Hydrogen-rich Water Should You Drink
For sufficient health benefits drink at least 3 bottles daily.
There is no harm in drinking more. It enhances therapeutic benefits and
improves hydration. H2, being the smallest molecule in existence, gets
absorbed very quickly in our body. Any excess is simply exhaled and does
not over-accumulate in the body.
1.
2.
Charging
Operation light flickers red when battery is low.
Connect the charging port to a standard 5V USB charger using the USB
cable provided. During charging, operation light is red. (Note: charger is not
included)
Full charge takes about 2 hours. When fully charged, light turns green. Turn
off charger and disconnect USB cable.
To prolong battery life:
Do not leave the hydrogen generator plugged in to the charger all day.
Once in a while allow battery to be completely discharged before
charging.
Cleaning
Clean the hydrogen generator using citric acid or white vinegar once every 2
weeks. (Citric acid / vinegar kills bacteria)
Dissolve 1 part of citric acid or white vinegar in 3 parts of water.
Fill the bottle with the dissolved solution. Shake the bottle a few times and let it
soak for at least 3 hours, preferably overnight.
Pour cleaning solution away and rinse bottle thoroughly.
Note: Our saliva contains bacteria. If you drink directly from the bottle, wash the
bottle body with dishwashing liquid daily. (Before washing it detach the bottle
body from the generator device)

Using Hydrogen Generator With Bottled Water
This is a useful function for traveling or outdoors where you do not have access
to clean water. The hydrogen generator can be used to generate hydrogen
directly into bottled water.
1. Fits bottles with cap size 1.2 inches (30 mm) in diameter.
2. Make sure the fit is good before operating the device.
3. Leave 1-inch (about 3 cm) of air space inside bottle for hydrogen gas to expand.
4. Cover the membrane with the silicone cap after use.
Step 1
1. Unscrew bottled water cap
2. Hold bottle upright
3. Attach the hydrogen generator by
turning it clockwise
Step 2
1. Turn bottle/hydrogen generator over
2. Check for leaks
3. Operate hydrogen generator normally

Warranty
Your ZYNAFLO Hydrogen Generator comes with 12-month warranty to cover
any defects except for those caused by misuse or scratches to external
surfaces.
Register your product warranty at: zynaflo.com/warranty
If you find any problems with the product or have any questions, please email us
at: [email protected] with your full name and Order ID. We will do
whatever it takes to resolve them.
Do's & Don'ts
Use clean water, preferably filtered, purified, or bottled water. It keeps the
electrodes and membrane clean.
Drink it immediately, preferably within one hour.
Clean the bottle with citric acid or white vinegar once every 2 weeks.
Keep the membrane and electrodes wet at all times.
Keep away from children, pets, heat or flames.
DO NOT fill the bottle with hot or boiling water.
DO NOT fill the bottle with ice, juices, alcohol or carbonated beverages.
DO NOT operate the hydrogen generator without water in the bottle.
DO NOT place the hydrogen generator in the refrigerator.
DO NOT submerge the entire generator unit in water.
DO NOT use chemical cleaners to clean the device.
DO NOT wet the charging port.
DO NOT leave the hydrogen generator plugged to the charger all day.

Specifications
Capacity: 240ml
Bottle Material: Food Grade Polycarbonate
Color: Rose Gold
Membrane Material: DuPont Nafion™ 117 SPE Membrane
Power Input: DC 5V / 2A
Operation Duration: 5 minutes
Duration to Full Charge: 2 Hours
Hydrogen Concentration: Between 2.5 to 3.5 ppm (2500 to 3500 ppb)*
Battery: Lithium-ion 750mAh / 7.4V
Dimensions: 2.4"(D) x 7.6"(H) / 60mm(D) x 193mm(H)
Net Weight: 0.73 lb (329 gm)
ZYNAFLO.COM
*Depending on water quality and level of water in the bottle