ZyXEL Communications Prestige 662HW Series Installation instructions

Prestige 662HW Series
802.11g Wireless ADSL 2+ 4 Port Security Gateway
Compact Guide
Version 3.40
May 2004

Prestige 662HW Series Compact Guide
2
Table of Contents
1 Introducing the Prestige..............................................................................................3
2 Hardware .....................................................................................................................4
2.1 Rear Panel Connections.........................................................................................4
2.2 The Front Panel LEDs ...........................................................................................5
3 Internet Access With Zero Configration ...................................................................7
4 Setting Up Your Computer’s IP Address ..................................................................8
4.1 Windows 95/98/Me.................................................................................................8
4.2 Windows 2000/NT/XP ..........................................................................................11
4.3 Checking/Updating Your Computer’s IP Address................................................12
4.4 Testing the Connection to the Prestige.................................................................12
5 Configuring Your Prestige........................................................................................13
5.1 Accessing Your Prestige Via Web Configurator ..................................................13
5.2 Common Screen Command Buttons .....................................................................15
5.3 Internet Access Using the Wizard ........................................................................15
5.4 Test Your Internet Connection .............................................................................21
6 Advanced Configuration...........................................................................................21
6.1 Wireless LAN Setup..............................................................................................21
6.2 Wireless LAN Security Setup................................................................................24
6.3 802.1x and WPA Overview...................................................................................26
6.4 Network Address Translation Overview...............................................................26
6.5 Configuring SUA Server ......................................................................................27
6.6 Firewall Overview................................................................................................29
6.7 Enabling the Firewall with Default Policy...........................................................30
6.8 Procedure for Configuring Firewall Rules ..........................................................31
7 Troubleshooting.........................................................................................................38

Prestige 662HW Series Compact Guide
3
1 Introducing the Prestige
The Prestige 662HW ADSL 2/2+ Gateway with 802.11g Wireless is the ideal all-in-one
device for small networks connecting to the Internet via ADSL. Key features of the
Prestige include NAT, 802.1x wireless LAN security, WPA (Wi-Fi Protected Access),
firewall and anti virus packet scan. See your User’s Guide for more details on all
Prestige features.
You should have an Internet account already set up and have been given most of the
following information.
INTERNET ACCOUNT INFORMATION
Your device’s WAN IP Address (if given): __________________
DNS Server IP Address (if given): Primary __________________,
Secondary _________________
Virtual Path Identifier (VPI): ____________
Virtual Channel Identifier (VCI): ____________
Multiplexing (VC-based or LLC-based): VC LLC
Encapsulation: (choose one below)
 RFC 1483
 ENET ENCAP Ethernet Encapsulation Gateway IP Address:
__________________
 PPPoA User Name: ____________ Password: ____________
 PPPoE Service Name: ____________
User Name: ____________ Password: ____________
Certifications
1. Go to www.zyxel.com
2. Select your product from the drop-down list box on the ZyXEL home page to go to
that product's page.
3. Select the certification you wish to view from this page.

Prestige 662HW Series Compact Guide
4
2 Hardware
2.1 Rear Panel Connections
Figure 1 Rear Panel Hardware Connections
Table 1 Rear Panel Description
LABEL DESCRIPTION
1. DSL Connect to a telephone jack using the included telephone wire.
2. LAN
1/DMZ..
4
Connect to a computer/external hub using an Ethernet cable.
3. POWER
12V DC
Connect to a power source using only the included power adaptor for
your region (see your User’s Guide).
After you’ve made the connections, connect the power adaptor to a power supply and
push in the power button to turn on the Prestige.
The PWR/SYS LED blinks while performing system testing and then turns steady on if
the testing is successful. A LAN LED turns on if a LAN port is properly connected.

Prestige 662HW Series Compact Guide
5
Table 1 Rear Panel Description
LABEL DESCRIPTION
CON/AUX
switch
CON/AUX
port
Only connect this port if you want to configure the Prestige using the
SMT via console port see your User's Guide for details.
Set this switch to the CON side to use the CON/AUX port as a console
port for local device configuration and management. Connect the RJ-45
end of the console cable to the console port of the Prestige and the
other end to a serial port (COM1, COM2 or other COM port) on your
computer. Your computer should have a terminal emulation
communications program (such as HyperTerminal) set to VT100
terminal emulation, no parity, 8 data bits, 1 stop bit, no flow control and
9600 bps port speed.
The console port is also an auxiliary WAN port. Push the CON/AUX
switch to AUX and connect the CON/AUX port to your modem or TA.
RESET You only need to use this button if you’ve forgotten the Prestige’s
password. It returns the Prestige to the factory defaults (password is
1234, LAN IP address 192.168.1.1 etc.; see your User’s Guide for
details).
2.2 The Front Panel LEDs
Figure 2 Front Panel
Refer to the following table for more detailed LED descriptions.
Table 2 Front Panel LED Description
LED COLOR STATUS DESCRIPTION
PWR/SYS Green On The Prestige is receiving power and functioning
properly.

Prestige 662HW Series Compact Guide
6
Table 2 Front Panel LED Description
LED COLOR STATUS DESCRIPTION
Blinking The Prestige is rebooting.
On Power to the Prestige is too low.Red
Blinking The Prestige is receiving power but not functioning
properly.
Off The system is not ready or has malfunctioned.
On The Prestige has a successful 10Mb Ethernet
connection.
Green
Blinking The Prestige is sending/receiving data.
On The Prestige has a successful 100Mb Ethernet
connection.
Amber
Blinking The Prestige is sending/receiving data.
LAN
1/DMZ-4
Off The LAN is not connected.
On The Prestige is ready, but is not sending/receiving
data through the wireless LAN.
Green
Blinking The Prestige is sending/receiving data through the
wireless LAN.
WLAN
Off The wireless LAN is not ready or has failed.
Fast
Blinking
The Prestige is sending/receiving non-PPP data.
Slow
Blinking
The Prestige is initializing the DSL line.
Green
On The system is ready, but is not sending/receiving
non-PPP data.
On The connection to the PPPoE server is up.Amber
Blinking The Prestige is sending/receiving PPP data.
DSL/ACT
Off The DSL link is down.

Prestige 662HW Series Compact Guide
7
Table 2 Front Panel LED Description
LED COLOR STATUS DESCRIPTION
CON/AUX Green On The CON/AUX switch is set to CON, the CON/AUX
port is connected to a management computer and
someone is logged into the Prestige.
Orange On The CON/AUX switch is set to AUX and the
CON/AUX port has an Internet connection through
a dial-up modem.
Blinking The CON/AUX switch is set to AUX and the
CON/AUX port is sending or receiving data through
a dial-up modem or ISDN TA.
Off The CON/AUX link is not ready, or has failed.
3 Internet Access With Zero
Configration
With the Prestige’s Zero Configuration, you can access the Internet easily. Simply
connect a computer to the Prestige and access the Internet without changing the network
settings (such as the IP address and subnet mask) of the computer.
Step 1. Make the hardware connections and turn on the Prestige (refer to the Rear
Panel Connections section).
Step 2. Wait until the DSL/ACT LED turns steady on. Launch your web browser
and navigate to a web site (for example, www.zyxel.com). The Prestige
automatically detects and configures your Internet connection. This may
take about two minutes.
Step 3. If you have a PPPoE or PPPoA connection type, a screen displays
prompting you to enter your Internet account username and/or password.
Enter the username, password and/or service name exactly as provided by
your ISP. Click Apply.

Prestige 662HW Series Compact Guide
8
Step 4. You should be able to access the Internet. Otherwise, follow the on-screen
instructions to solve the problem(s). Refer to the rest of this guide or the
User’s Guide to manually configure your Prestige for Internet connection
and other advanced settings.
4 Setting Up Your Computer’s IP
Address
Skip this section if your computer is already set up to accept a
dynamic IP address (this is the default setting for most new
computers) or has a static private IP address.
The Prestige is already set up to assign your computer an IP address. Use this section to
set up your computer to receive an IP address or assign it a static IP address in the
192.168.1.2 to 192.168.1.254 range with a subnet mask of 255.255.255.0. This is
necessary to ensure that your computer can communicate with your Prestige.
Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already
be installed on computers using Windows NT/2000/XP, Macintosh OS 7 and later
operating systems.
4.1 Windows 95/98/Me
1. Click Start, Settings, Control Panel and double-click the Network icon to
open the Network window.
2. The Network window Configuration tab displays a list of installed
components. You need a network adapter, the TCP/IP protocol and Client
for Microsoft Networks.

Prestige 662HW Series Compact Guide
9
3. In the Network window
Configuration tab, select your
network adapter's TCP/IP entry and
click Properties.
4. Click the IP Address tab.
-If your IP address is dynamic, select
Obtain an IP address automatically.
-If you have a static IP address, select
Specify an IP address and type your
information into the IP Address and
Subnet Mask fields.

Prestige 662HW Series Compact Guide
10
5. Click the DNS Configuration tab.
-If you do not know your DNS
information, select Disable DNS.
-If you know your DNS information, select
Enable DNS and type the information in
the fields below (you may not need to fill
them all in).
6. Click the Gateway tab.
-If you do not know your gateway’s IP
address, remove previously installed
gateways.
-If you have a gateway IP address, type it
in the New gateway field and click Add.
7. Click OK to save and close the TCP/IP Properties window.