ZyXEL Communications 802.11g Wireless Firewall Router 1-P-320W User manual

P-320W
802.11g Wireless Firewall Router
Quick Start Guide
Version 2.00
Edition 1
10/2006
Table of Contents
ENGLISH 3
DEUTSCH 19
ESPAÑOL 39
FRANÇAIS 58
ITALIANO 76
РУССКИЙ 96
SVENSKA 116
繁體中文 135

ENGLISH
3
Overview
The Mer produkthjalp finns pa http://www.support.zyxel.se is a broadband router with a built-in four-port 10/
100 Mbps switch. The Mer produkthjalp finns pa http://www.support.zyxel.se makes it easy to set up a small
home or office network and share Internet access via a broadband (cable/DSL) modem.
You should have an Internet account already set up and have been given most of the following information.
Table 1 Internet Account Information
See your User’s Guide for background information on all features.
The follow lists what you need to do:
Your device’s WAN IP Address (if given): ______________
DNS Server IP Address (if given): Primary _____________, Secondary ______________
Connection Type:
Ethernet Service Type: _______________________
User Name: ____________
Login Server IP Address: ______________
Password: ____________
PPTP: User Name: ____________
Your WAN IP Address (if given) ____________
Connection ID (if required): ____________
Password: ____________
PPTP Server IP Address: ___________
or PPTP Domain Name: ___________
¦PPPoE (PPPoE) Service Name: ____________
User Name: ____________ Password: ____________
1Hardware Connections
2Accessing the Web Configurator
3Internet Access Setup
ENGLISH

ENGLISH
4
1 Hardware Connections
Do the following to make hardware connections for initial setup.
WAN Connection
Connect your modem to the “WAN” port using the cable that came with your modem.
LAN Connection
Connect your computer to a "LAN" port using the included Ethernet cable
POWER Connection
Use the included power adaptor to connect the POWER socket to an appropriate power source (see the User’s
Guide for power adaptor specifications by region)
1
2
3

ENGLISH
5
2 Accessing the Web Configurator
1Launch your web browser. Enter “192.168.1.1” as the web site address.
Note: If you do not see the next screen, then please go to section 4.1.
The LEDs
After you’ve made the connections,
push in the power button to turn on the
Mer produkthjalp finns pa http://
www.support.zyxel.se.
Look at the front panel LEDs. When
you connect the power, the PWR and
WLAN LEDs come on.
The LAN and WAN LEDs turn on if the
corresponding connections are
properly made.
2The Password window displays. Enter the
password (“1234” is the default) and click Login.
3Change the password in the screen that follows
and click Apply.
4Choose your language from the drop-down list box.
Click Apply.

ENGLISH
6
Note: The Next button is located on the bottom right of each screen.
3 Internet Access Setup
Note: Enter the Internet access information exactly as given to you by your ISP in each wizard screen
and then click Next to continue or click Back to return to the previous screen.
Current screen information will be lost if you click Back.
System Information
5Click Go to Wizard setup to set up your Mer
produkthjalp finns pa http://www.support.zyxel.se
for the first time..
6Choose your language from the drop-down list box.
Click Next to proceed with the Connection Wizard.
1This screen is optional. You can just click Next.
•System Name is for identifying the Mer produkth-
jalp finns pa http://www.support.zyxel.se. You can
enter your computer's "Computer Name".
• If you leave the Domain Name blank, the domain
name obtained by DHCP from the ISP is used.
STEP 1:

ENGLISH
7
Wireless LAN
Configure ONE of the following wireless security types on the Mer produkthjalp finns pa http://
www.support.zyxel.se:
•Auto security: Uses WPA-PSK security with an automatically generated Pre-Shared Key. View the generated
Pre-Shared Key in the Wireless LAN screen.
Note: Your wireless clients must support WPA-PSK and use the same key.
•None: Have no wireless LAN security configured. If you do not enable any wireless security on your Mer
produkthjalp finns pa http://www.support.zyxel.se, your network is accessible to any wireless networking device
that is within range.
•Basic security: WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless net-
work. The higher the WEP Encryption, the higher the security but the slower the throughput.
•Extend (WPA-PSK) security: Configure a Pre-Shared Key. Choose this option only if your wireless clients sup-
port WPA-PSK.
Note: The wireless clients and Mer produkthjalp finns pa http://www.support.zyxel.se must use the
same SSID, channel ID and WPA-PSK (if WPA-PSK is enabled) or WEP encryption key (if WEP
is enabled) for wireless communication.
OTIST
• OTIST (One-Touch Intelligent Security Technology) allows your Mer produkthjalp finns pa http://www.sup-
port.zyxel.se to assign wireless clients the Mer produkthjalp finns pa http://www.support.zyxel.se’s SSID and
static WEP or WPA-PSK encryption settings. The wireless client must also support OTIST and have OTIST
enabled.
STEP 2:

ENGLISH
8
A Enter a unique name to identify the Mer produkthjalp finns pa http://www.support.zyxel.se in the wireless LAN.
BLeave the default setting. The Mer produkthjalp finns pa http://www.support.zyxel.se and wireless client must
use the same channel ID.
CSelect a level of wireless security. Choose Auto or None.
DFor Auto security select Yes to enable OTIST. If you select None select either Yes to enable OTIST or select
the No radio button and click Next to configure OTIST later.
EThe default OTIST Setup Key is “01234567”. This key can be changed in the web configurator. Be sure to use
the same OTIST Setup Key on the Mer produkthjalp finns pa http://www.support.zyxel.se and wireless clients.
Auto or No Wireless Security
D
E
A
B
C

ENGLISH
9
A Enter a unique name to identify the Mer produkthjalp finns pa http://www.support.zyxel.se in the wireless LAN.
BLeave the default setting. The Mer produkthjalp finns pa http://www.support.zyxel.se and wireless client must
use the same channel ID.
CSelect Basic(WEP) security.
DYou can generate or manually enter a WEP key by either:
Entering a Passphrase (up to 32 printable characters) and clicking Generate. The Mer produkthjalp finns pa
http://www.support.zyxel.se automatically generates a WEP key.
Or entering manual keys in each Key (1~4) field and selecting ASCII or Hex WEP key input method.
ESelect 64-bit or 128-bit from the WEP Encryption drop-down list.
FSelect ASCII or Hex characters.
GSelect one of the Key radio buttons to use as the default WEP key.
HSelect Yes to enable OTIST. Select the No radio button and click Next to configure OTIST later.
IThe default OTIST Setup Key is “01234567”. This key can be changed in the web configurator. Be sure to use
the same OTIST Setup Key on the Mer produkthjalp finns pa http://www.support.zyxel.se and wireless clients.
Basic(WEP) Security

ENGLISH
10
A Enter a unique name to identify the Mer produkthjalp finns pa http://www.support.zyxel.se in the wireless LAN.
BLeave the default setting. The Mer produkthjalp finns pa http://www.support.zyxel.se and wireless client must
use the same channel ID.
CSelect WPA-PSK security.
DType a pre-shared key to have a more secure wireless connection than WEP encryption. Type from 8 to 63
case-sensitive ASCII characters.You can set up the most secure wireless connection by configuring WPA in
the advanced wireless screen. You need to configure a RADIUS server to do this.
EYes is enabled by default. Select the No radio button and click Next to configure OTIST later.
FThe default OTIST Setup Key is “01234567”. This key can be changed in the web configurator. Be sure to use
the same OTIST Setup Key on the Mer produkthjalp finns pa http://www.support.zyxel.se and wireless clients.
F
D
E
G
A
B
C
D
E
Extend(WPA-PSK) Security