ZyXEL Communications G-570U Instruction Manual

Z-Com, Inc. CONFIDENTIAL (All rights reserved by Z-Com) Product Department
page 1 Last Modified:2007/6/14
ZyXEL
Firmware Release Note
ZyXEL G-570U
Release V1.00(ZO.1) C0|2007/05/29
Date: May 29 2007

Z-Com, Inc. CONFIDENTIAL (All rights reserved by Z-Com) Product Department
page 2 Last Modified:2007/6/14
ZyXEL G-570U Standard Version
release V1.00(ZO.1) C0 2007/05/29
Release Note
File Name:
Zyxel_G-570U_V1.00 (ZO.1) C0_20070529.rmt (used by F/W upgrade)
Supported Platforms:

ZyXEL G-570U (HW0.2)

Software Base Versions:
Notes:

Known Issues:
1． When OTIST is enabled, the SSID must less than 24 characters.
2． In AP+Repeater mode, highly recommend to use Ethernet to configure the device. When changing
operation mode from bridge to AP + Repeater, vice versa, might cause the device hang up.
3． In 11a mode, the RTS/CTS setting does not work
Main Features:
V1.00(ZO.1) C0|2007/05/29:
1. Formal release from V1.00(ZO.1)B10.
V1.00(ZO.1) B10|2007/04/16:
1. [bug fixed]
1．#1581, When FTP between 3 DUT and 1 STA, one DUT will disconnect the link.[ 070329812]
2．#882, In Wireless Client Mode. The DUT sent short preamble packet with Long preamble setting.
[060628908]
3．#1555, When DUT's radio disable. Sometimes the WLAN LED still was light. It should go
out[070327682]
4．In wireless client mode. If DUT didn't connect to AP, it status was showed ready[070327683].
5．#1556,When OTIST in progress. The G-570U can configure the wizard setting
6．#1454,When OTIST in progress. The DUT cannot reset by software but can reset by hardware.
7．#1347, The ssid cannot support multi-language.
8．#613: Telnet DUT, the power setting is unwanted.
9．#1402, Use multi-station connect with DUT, on View Association List Page, click the Rescan
button continuously, the Web Page will be shown incorrectly .In CLI,HTTP process has
been killed.